Are you getting questions, advice, and dubious sales pitches from all comers about how to design and run an HVAC system to combat infectious disease? You’re not alone. Engineers, facility managers, architects, and other building professionals are all... Read more

We have a project looking to use Radiant Floors to help with space heating.  I don't have experience with this so I'm looking for any insights.  Pros / Cons? 

This project is a non-profit and is needing to reach LEED Silver minimum.  This is in Washington State.  Thank you for your help.

Folks,

In case any of you enjoy the Phoenix weather, I wanted you to be sure to know that our company, Sundt, which is headquartered here is looking for a sustainability director to lead up our efforts. This comes after two years of work and hiring a consultant (Brightworks out of California) to help us prepare and take the next steps. I... Read more

I am looking at having staff members take a materials course and deciding between Parsons Healthier Materials and AIA Materials Matter certificate programs. Does anyone have feedback on either? Bonus points if you know about both and can provide a direct comparison. Thanks!

Hi Green Gurus,

We have a lot going on this week, and I know it’s hard to keep track of everything, so I’m providing this quick update.

Conveniently, we have also just launched the new Peer Networks Hub on BuildingGreen.com, with a Calendar page where you can see all upcoming events (and a link to recordings of past events). You... Read more

Do any of you have experience with Design For Freedom yet? It came to my attention and I'm trying to investigate. I would love to hear feedback and experiences that you may have at this point. It seems like an opportune moment for this issue of forced labor (yikes! so much I don't know...) to come to the forefront, and I'm curious to hear how... Read more

Hello Everybody,

I would like to invite you all to an event being hosted by the AIA Seattle COTE.  This is the next event in a series entitled Pathways to Decarbonization.  Date and time: May 13, 12:00pm - 1:00pm 

Description:  Universities are learning laboratories to explore and implement solutions to our greatest challenges... Read more

Hi Friends, 

I'm working on an SOP for construction waste management for LBC core and LBC materials petal projects and wanted to get your input on the comingled facility requirements. According to the guidelines, any waste that goes to a comingled facility must be a facility that has an average diversion rate of 80% or higher as a... Read more

We have a client thats going through a TI remodel in a building thats a LEED Core+Shell certified building. One of the questions we are trying to figure out is are there things we need to be doing to not imperil the building's certification. 

I think the answer is that the landlord had to write tenant guidelines at the time of... Read more

Welcome to the quiz portion of Seal, Tape, Gasket: A Sticky Search for Better Materials.

Learning Objectives
Upon completing this course, participants will be able to:


1. Choose the best means of achieving barrier continuity for any given application.
2. Assess a joint sealant's service life and product... Read more

Alerting building occupants about indoor air pollutants is important in many situations.

BuildingGreen-Approved IAQ Equipment

Products approved by BuildingGreen range from single-use test kits to monitoring systems installed throughout a building. Some test for gases such as radon, VOCs, or carbon monoxide, and some for mold and... Read more

Hi! Over the last 10 years, the firm where I work in Boston has predominately designed housing & senior living projects in the the Boston Metro region, with the occassional project in NH, CT, RI, and NY. We have built projects as far south at DC, but never designed anything to my knowledge in California in our 55 years of operation. A... Read more

Hello All,
Checking in on experience with Armstrong's Tectum E-N with NEOPOR Graphite polysytrene GPS rigid foam insulation core in roof panels for exposed structure?
BASF says that NEOPOR uses up to 30% less material than other rigid foam; it is greenguard gold cerified. 

Interesting that the NEOPOR increases in R-value as... Read more

I received the following email from Naajia at Southface.  I'll be out of town until November 8, but I'll see if there's time for me to address at least the second part before I leave:

A question regarding the BIT-User Forum was brought to my attention by a participant. Apparently when you are posting a question and you pick your location... Read more

Here is your friendly reminder to complete the SCL Salary Survey if you have not yet.

There is a link at the end of the SurveyMonkey Survey to a Google form where you will be able to register that you completed the survey—that way we’ll know who participated without having any identifying info in the actual survey. Results will be shared... Read more