Join Brent & Alex to learn what's new and what's been updated in our BuildingGreen Guide to Thermal Insulation, Fourth Edition, including what you should know about:

So much has changed so quickly!

Our 30-minute roundtable... Read more

Protection against corrosion is the primary function of steel coatings, which often contain corrosion inhibitors, volatile solvents, heavy metals, and other hazardous chemicals.

These coatings are specified when steel is used structurally, outdoors, or in high-use areas. In these situations, hazardous coatings are often applied off-site... Read more

Hello,

We are having a discussion / a bit of a debate in our office about the merits and sustainability of different roofing materials. Our current standard is to use a PVC membrane, which we all know is highly toxic. TPO is an obvious alternative that is less toxic, but it has some performance concerns and can often lead to leaking (not... Read more

Hey everyone,

This is a quick note to say I am retiring at the end of this month and will be taking a hiatus from the SDL group. I will no longer be practicing architecture, but I will remain active in efforts to preserve the wonders of this world for future generations.   

To all my SDL sisters and brothers (I don't always sound... Read more

Welcome to the quiz portion of How to Build Green At No Added Cost

Learning Objectives
Upon completing this course, participants will be able to:


1. Know how to make a value proposition for green buildings.
2. Explain how shrinking a green building and investing in its envelope can reduce first costs of its... Read more

In looking for ways to reduce jobsite waste and lower our carbon emissions, I'm working on a business plan for centralized procurement, in lieu of individual project purchasing their own tools, PPE, & consumables.  I'm curious as to how many other GC's on here use (or have used) a central purchasing process and if you have any pros/cons... Read more

We are hiring! Please share with any potential talented and passionate candidates.

https://archinect.com/jobs/entry/150052970/sustainable-design-specialist

ps. And, yes we recently rebranded for our 40th anniversary for those who may be confused :) 

Hello everyone!

The Sustainable Design Leaders Summit will be kicking off with a Pre-Summit workshop in Seattle July 31st, 9am - 3pm. If you are interested in joining your peers for this workshop, please see the registration link below. Also, if you know someone in the Seattle area that would be good to have in the workshop and might be... Read more

Hello Sustainable Construction Leaders!

Here at BuildingGreen we are excited and looking forward to creating a valuable and engaging online summit with you all for 2020! In addition to going online, this year we have shifted the dates so that the SCL Summit will occur within weeks of all other Peer Network Summits. This allows us to host... Read more

Anyone have experience with electric boilers? I think in cold climates it's perhaps the first thought when trying to reduce scope 1 emissions in an HVAC application that would have historically used gas-fired boilers... but it seems like they're only an incremental improvement compared to heat pumps / geothermal / VRF type solutions. We haven't... Read more

With the current push for improved window performance to meet energy codes and Passive House, room side low-e coatings can significantly improve window U-values. However, back in 2018 Payette did this excellent study that showed that while room side low-e coatings improved window U-value and increased the interior radiant temperature, the... Read more

SDL Show & Tell in Chicago, Tuesday, November 13 from 7-9:30 PM (CST)
HKS | 125 S Clark Street | Chicago, IL 60603

What better way to kick off your time at Greenbuild than with snap previews of the best sessions? The Sustainable Design Leaders Show & Tell is back, brought to you by BuildingGreen and HKS! This event is by... Read more

Hello, I'm wondering if anyone out in the network has experience with the following:

>Low carbon concete mixes for polished concrete slabs: we're hearing concerns from our concrete supplier that using a low carbon mix design for a polished concrete slab will cause pitting. What experience do others have?

>Low carbon concrete... Read more

My firm is mobilizing for a year of carbon awareness and reduction that goes beyond the energy consumption of our designs. We are looking to hire a full time person to take on LCA tracking for our current projects. Ideally it is a climate crisis super-hero of sorts who could also look at our design process and help develop multi-faceted... Read more

Hi everyone,

We’re excited to announce that registration for our Summer 2024 Sustainable Design Leaders Summit is now open! Join us from July 15th-17th at IslandWood on Bainbridge Island, a beloved location where we’ve hosted Summits multiple times before. Register early to save your seat, and feel free to reach out to me with any... Read more

Hello AEC Sustainability Leaders (aka the Green Gurus)!

As we continue to promote and expand the use of mass timber on our projects, it is becoming increasingly important that we learn more about the spectrum of impacts that this material selection is having on the forests and communities from which we’re sourcing our wood fiber…both... Read more