Food waste is a major source of greenhouse gas emissions from landfills due to methane released during anaerobic decomposition.

BuildingGreen-Approved Composters

BuildingGreen approves in-vessel commercial composters, which require the smallest footprint and are most likely to be suitable for a densely populated area.

Why... Read more

Hey SDL,

I'm curious if anybody out there has developed specification language requiring a certain level of airtightness (as assessed via one or a series of blower door tests) for a commercial project when it is not going for a Passive House certification and a blower door test is not required by code--basically, something in the... Read more

Welcome to the quiz portion of Designing for Future Weather (recorded webcast)

Learning Objectives
Upon completing this course, participants will be able to:


1. Understand the science of climate-change predictions.
2. Stay abreast of changing climate models.
3. Learn how to make use of future weather... Read more

Erika Heet is the Editor-in-Chief of BuildingGreen. She is the former Editor-in-Chief of Interiors magazine. She has held senior editor positions at Dwell and Architectural Digest, and is the author of two books on modern architecture. She has served on the boards of Greenbuild and the Sustainable Furnishings Council, as well as on juries for... Read more

Hello Everyone,

Here is the 2019 SCL Demographics Report, thank you to everyone who submitted responses. Enjoy!

The SCL Salary Survey Report will be coming next and please note that the Salary Survey is only distributed to those who participated.

All the best,

RoseAnn

We have an MEP engineer that is calculating peak loads at about 6 times passive house levels on a large commercial building that is at or near passive house levels of insulation and air infiltration. We suspect one reason is that he is figuring a 50% efficiency level for the ERV. We are showing him ERV systems with 80-90% efficiency, but they... Read more

Protection against corrosion is the primary function of steel coatings, which often contain corrosion inhibitors, volatile solvents, heavy metals, and other hazardous chemicals.

These coatings are specified when steel is used structurally, outdoors, or in high-use areas. In these situations, hazardous coatings are often applied off-site... Read more

All,

The current version of the program manual includes ID numbers for the best practices, as shown below. I know we want to keep a quick reference number or ID, but though it would be worth asking if we want to use the below, reorder them in some way, or use a different kind of ID. Opinions?

Thanks,
Jenny

--------... Read more

Hello, All!  I'm hoping for your help to keep a green roof on a project of ours.  We have a large healthcare project in the Midwest that is coming in over budget.  To avoid losing our extensive green roof, I'm looking for alternate sources of funding - grants, private sources, etc.  Has anyone gone down this path before and have shareable... Read more

If anyone else has gotten confused going between parts-per-million and percentages (parts per hundred!) for material reporting here's a little infographic that might help. Feel free to use or improve! 

Currently not for sale, being updated and re-released in November 2021.

New Guide to Thermal Insulation Report

The BuildingGreen Guide to Insulation provides detailed guidance on insulation products and practices, including cost comparisons and detailed recommendations on what insulation to use, and what to avoid. It's a treasure... Read more

hi all! I'm almost at the finish line with this year's 2030 reporting...whew. I'm running into an issue that I wanted to throw out to this group, regarding the zero tool and national average baselines. Hoping some of y'all who manage your firm's 2030 data, or are just more familiar with CBECS and related data, have some insight / experience to... Read more

Hi Everyone - I hope this isn't a repeat topic. We are starting to get familiar with TallyCAT at SAR+ and have a few people testing our projects in it. Is anyone willing to help us troubleshoot or share lessons learned? We're running into a few errors and wonder if our Revit models and workflow are the issue, or if we need to be doing something... Read more

Good morning, All,

Just a bit of news this morning.  My family and I are moving back out west!  I am continuing in my current role with EwingCole, but will be doing so from Portland, Oregon.  Although North Carolina has a been a wonderful place for us for the past 13 years, it is time to be close to family in the northwest and southwest... Read more

Hello SDL!

Has anyone set "Ecosystem Benefits/Service" targets for an individual project or for all their projects? I was previously against the idea of even measuring ecosystem benefits but I've had my mind changed in recent months!

Currently we want to set a target for every project to: "Improve ecosystem benefits on every site... Read more

On a large sports project, we worked with the structural engineer to spec low carbon / high SCM concrete mixes. Much of the floor area will be sealed and polished concrete, and a concrete sub is pushing back on the SCMs saying they should not be above 20% (with a preference for 0%) for the polish to finish properly, per the manufacturer. Anyone... Read more