I am looking for a Mechanical Engineering firm in New York state who works in mid-sized commercial (ideally hospitality or multifamily experience) and who has experience with geothermal GSHP systems.

Dana Manafarm

Evaporative coolers use far less electricity than conventional refrigerant-cycle air conditioners and they operate without the use of refrigerants, both features that make them attractive for green buildings. However, their suitability is limited to drier climates, and most products use significant quantities of water.

BuildingGreen... Read more

Hey Everyone!

We are delighted to share a major milestone in our commitment to sustainable design. After two+ years of intensive research, refining, and internal application, NBBJ is thrilled to announce the external launch of ZeroGuide, an innovative tool for early-phase carbon estimation, now available to the entire AEC community!... Read more

Hi folks,

We're kicking off a new way for us to collaborate as a network: monthly web-based conference calls. The first one will be on Friday, Nov 15 at 1:00 eastern time. The topic will be "Sustainability and the Small Firm: Practices in Transition" -- which is the name of the proposal James has submitted (and gotten first-round... Read more

I have been asked to recommend folks to join the AIA’s Framework for Design Excellence.  The AIA Framework for Design Excellence is basically the top ten toolkit, that has been rebranded by the AIA and is forming the backbone of much of the policy that the AIA is currently setting.

From the AIA's website:

We're wrapping up a multi year project that went through multiple design changes, leaving us with a ton of material samples.  Does anyone know of a good place we could donate these samples to, to keep them out of the landfill.  I'm in the greater Seattle area.  Thank you for any suggestions.

How much does every designer need to know? How to support that basic literacy?

Guiding Questions:

For those of you who are close to CLT and mass timber, has the jump in US wood price also impacted the pricing of CLT on your projects, or viability of CLT compared to the cost of steel or concrete frame buildings?  

If anyone has price data comparing CLT today to pre-Covid pricing or any metric that would describe the percentage change... Read more

...for all the folks on the west coast.

It’s smokey out there. For anyone looking for a cheap and relatively effective way to clean your indoor air, here is an article on a DIY box fan filters. 

https://www.texairfilters.com/a-variation-on-the-box-fan-with-merv-13-filter-air-cleaner/

This PSA is from our friends at NEEA (... Read more

Hello Green Gurus!

Thank you to all who joined the cross-networks adventure that was the Sustainability Leaders Week: 2021 Summit-Palooza, all of us at BuildingGreen were so glad to share that time and space with you all.

We have been receiving a few questions about next steps, here are a couple details we wanted to share with you... Read more

Welcome to the quiz portion of Choosing Insulation: High-Performance Wall Assemblies – Unit 3.

Learning Objectives
Upon completing this course, participants will be able to:


1. Describe key environmental and performance factors for insulation materials.
2. Recount bottom-line insulation material... Read more

July 29-31, 2020
Chicago, Illinois

Learn more and register

Tuesday, Mar. 17, 11am EDT

Tuesday... Read more

Conventional stormwater management treats rain as the enemy—a dangerous and destructive force that must be deflected away from building sites as quickly as possible.

But as we pave more and more of paradise,... Read more

Hi folks,

I’m sure most of you know Gail Brager, or at least know of her. For those who don’t, she helps run UC Berkeley’s Center for the Built Environment and is a long-time champion of all the things that make buildings work for their occupants. Perhaps most notably, she was a co-author of the Adaptive Thermal Comfort option in ASHRAE... Read more

Hi All -

I am looking for recommendations for a car charging station for a Catholic convent project we are working on. At this time, the client has requested either 2 charging stations or one station that can charge 2 vehicles. I've been researching chargers and am thinking that it does make sense to specify a commercial-grade charging... Read more

Hi Friends, 

I'm working on an SOP for construction waste management for LBC core and LBC materials petal projects and wanted to get your input on the comingled facility requirements. According to the guidelines, any waste that goes to a comingled facility must be a facility that has an average diversion rate of 80% or higher as a... Read more

We had so much fun at our Contractor coffee talk that I reached out to our MEP friends to see if they would set up something similar.  And they have agreed to host a talk on Thursday December 2, at 1-2pm EST.  They will talk about decarbonizing buildings, on a schedule that keeps us under the 1.5° C limit and will also address strategies for... Read more