Welcome to the quiz portion of Seal, Tape, Gasket: A Sticky Search for Better Materials.

Learning Objectives
Upon completing this course, participants will be able to:


1. Choose the best means of achieving barrier continuity for any given application.
2. Assess a joint sealant's service life and product... Read more

I've been seeing Armstrong's DC flexzone ceiling system at Greenbuild for many years. I'm working on a net zero project with LED lights and solar panels. In theory, the transmission losses in going from DC power from panels to AC for the building to DC for the lights would be eliminated. But does anyone actually have experience using this... Read more

Hi all, 

Following the SCL Summit back in November, the Waste Subgroup agreed to complete a Model Waste Management Plan to serve as a contractor commitment to reduce construction waste. I distributed the attached (very rough) draft back in Jan., and received some good feedback via forum comments. 

We would like to set up a call to... Read more

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

The webinar occurred on Wednesday, February 23rd at 2:00 eastern.

USGBC and IWBI are beginning to see eye to eye across a range of focus areas. Knowing how to leverage each in a mutually beneficial way is the key to driving... Read more

At the summit we discussed sharing which consultants our firms have used for anti-bias training and EDI education. My office will participate in the upcoming AIA Seattle pilot Intercultural Leadership Program, but that only includes two of our firm leaders. If anyone can refer a consultant in the Seattle region for all-office trainings, I'd... Read more

Hi SDLers: See the great opportunity to weigh in on the 5th National Climate Assessment at a series of workshops in early 2022. 

Register here:

https://www.globalchange.gov/content/nca5-engagement-workshops?utm_sourc...

Hope all are staying well.

Mary Ann

Last summer I shared a request here for folks to take a survey we had open that aimed to understand how architects and engineers are (or aren't) using climate projections to inform design. This white paper, written in collaboration with HGA and the University of Minnesota Climate Adaptation Partnership, reports on the results of that research. ... Read more

I’m a volunteer member of the ASHRAE 209 ("Energy Simulation Aided Design for Buildings Except Low-Rise Residential Buildings”) Committee.  Are you familiar with ASHRAE 209? It was first published in 2018, and it outlines a process for incorporating energy modeling into the design process. 

From the forward: 

 ASHRAE Standard 209... Read more

For those folks who are on our retrofit electrfication roadmap post-palooza-sub-sub-working group ;-) , I thought you might be interested in these three guides just released from BEI in collaboration with S. Winter Associates.

Here are the three Playbooks:

I have to admit that I wasn't particularly paying attention to LEED during Greenbuild, but anyone recall the "big announcement by USGBC" that LEED v4.1 is coming?

Article can be found @ Green Building Law Update by Stuart Kaplow and the title is "LEED v4.1 Announced by USGBC at Greenbuild."

https://www.greenbuildinglawupdate.com/... Read more

The overwhelming majority of wallcoverings are flexible vinyl, laden with all the life-cycle concerns that come with PVC. Products used to contain orthophthalate plasticizers—which make up a large percentage of these products. Phthalates are not bound in the material and can slough off in dust, exposing occupants during everyday work or play.... Read more

We have an increasing number of projects, where the client is coming to us with "net zero" aspirations and plans, some of which don't fit the typical all-electric, grid-tied building that produces 100%+ of its annual energy use on-site.  There include examples like:

1) A (targetd) living building that maximizes on-site production, with... Read more

Hi all,

I am on the planning committee for the National Adaptation Forum, which is an excellent conference (this will be the 6th annual) that has relatively little representation from architecture and engineering audiences. Our municipal and agency clients, as well as private sector, tend to attend this conference for climate adaptation... Read more

Help. I have a contractor in need of advice on IAQ testing agencies and I'm largely uninformed about the local market of IAQ testing agencies. Anyone have organizations they'd specifically recommend or not recommend?

Feel free to email me directly if you'd prefer - awilson@ayerssaintgross.com.

Aley

Hello Community, 

For those of you who will be in San Diego shortly for Greenbuild, and want to come together to honor Lance, please see the details at :

https://celebratinglance.eventbrite.com

We will meet up outside at 5pm on the 22nd. Details in the evite. 

Please share with anyone outside of this list who was a... Read more

My name is Douglas Flandro. I am the sustainable design leader at CambridgeSeven in Cambridge, MA. I started my career in film and theater design. I moved into museum exhibit design with a graduate degree in interior architecture at the Rhode Island School of Design in 2003. I still design museum exhibits for science museums, nature visitor... Read more

Hi gurus,

Do any of you have preferred portable devices for indoor air quality monitoring? I know it's hard to find apples to apples, but ideally temperature, CO2, VOC, PM2.5, PM5 would be on the list. Mid-level accuracy - better than consumer, not as $ as IAQ professional level. Thanks!

Welcome to the quiz portion of LEED 2009: The Missing Manual.

Learning Objectives
Upon completing this course, participants will be able to:


1. Stay abreast of changes to LEED NC-2009.
2. Understand the more ambiguous aspects of LEED NC-2009.
3. Explain key interpretations of LEED NC-2009.
4.... Read more