BuildingGreen Report

Quiz

Welcome to the quiz portion of Downscaled Climate Data: Where to Get It and How to Use It.

Learning Objectives
Upon completing this course, participants will be able to:


1.  Define “downscaled climate data” and understand where to find it and how to apply it in modeling to achieve greater environmental sustainability and... Read more

Forum topic

Hello All,

A group of us (three architects and a builder- sounds like there should be a joke here) were debating this and we  are stumped.

Application: Residential exterior trim.

50 year warrantied composite product of agricultural byproduct with PVC (EPD not published yet) vs 100 year (if primed on all sides and painted or... Read more

Forum topic

Hi everyone,

Since I know we have a lot of talented people in this group, I'd like to reach out to those of you based in Los Angeles and see if anyone is interested in talking at an upcoming Living Building Challenge collaborative event.  The topic of the meeting is "Selecting Healthy Materials 101: From the perspectives of... Read more

Forum topic

Hi, curious if anyone in the group has considered using Fitwel in an existing (built) school project (K-12). 

Would be interested in hearing your experiences and if this tool is a good fit for this type of project.

Forum topic

Hi everyone,

As you may know the ICC has changed the way the IECC will be written in the future and most of us think that will reduce the stringency of the future energy codes that are the biggest lever in the fight against climate change within the buildings sector.

So one of the best pathways forward is via ASHRAE, which has a... Read more

Product Guide

CEUs are available for reading all the building-envelope product guides and primer. Click here to learn more and take the quiz.

Standard spray polyurethane foam (SPF) insulation is made using blowing agents with extremely high global warming potential (GWP), which can cancel out much of the potential energy savings from use over its life... Read more

Forum topic

BITuser Meeting:  5/23/18

Participants:  Shane, Andrea, Angela

Notes:

Southface to provide "style tiles" before 6/15 
Greg to send to Andrea, couple dozen images for Best Practice pages
Southface will send, in week to 10 days, "full content" for BP03 - Energy Audit 
(BP03 "full content" will address... Read more

Forum topic

Hello All! 

We are using TallyCat to extract quantities from our REVIT Model, and bring them over to EC3 to get a model GWP (focusing on material categories required to evaluate ILFI Zero Carbon certification).  There are a number of questions that are popping up!!

I am sure there are others trying the same thing, yes... maybe?! ... Read more

Forum topic

Hi All,

I wanted to share an exciting opportinity with this esteemed group: Placetailor is seeking out a Mechanical Engineer to add to their growing team. They are located in Boston, MA and focus on Passive House, Low-energy Design, and they have for two years running meet the tenets of the AIA 2030 Commitment! This is an exciting place... Read more

Forum topic

Hi SCL, 

Just thought I would share an interesting piece from Construction Dive about a lack of guidance on when to halt work due to bad air quality--from wildfires or otherwise. A few SCL companies are mentioned here as having their own policies, but I was pretty shocked to learn that this isn't required by OSHA. 

https://www.... Read more

Forum topic

With the increasing need to support design with techncial expertise, I am curious to hear how others are meeting this challenge.  Do you build energy models in-house?  Do you have a team of experts whose sole responsibility is to support design teams with tasks such as energy modeling and LCA, or is that expertise distributed throughout the... Read more

Author

Author

Reports, Courses, Study Guides, Live Webinars

This webinar occurred – Wednesday, October 28, 2020 2:00 – 3:00pm ET (11:00am – 12:00pm PT)

Are you getting questions, advice, and dubious sales pitches from all comers about how to design and run an HVAC system to combat infectious disease? You’re not alone. Engineers, facility managers, architects, and other building professionals are all... Read more

Basic page

Wellness is key to sustainable design. As more and more clients understand the value of healthy built environments, designers need to understand the various wellness rating systems available, and which would meet the project's goals and needs.

WELL and Fitwel have emerged as the two leading wellness rating systems,... Read more

Campus-wide Group

Forum topic

I opened IE11 (Internet Explorer 11) today, and saw a message indicating IE11 will be retired June 15th, 2022. While I have no personal attachment to IE11, it was the only internet browser I could consistantly get to open LEED Online credit templates on the actual website. 

Has anyone found another way to be able to fill out LEED credit... Read more

Quiz

Welcome to the quiz portion of Exterior Paints: Long-Term Protection and Environmental Tradeoffs.

Learning Objectives
Upon completing this course, participants will be able to:


 

1. List the primary differences between alkyd and latex paints and stains and between wood, concrete, and metal primers.
2. Explain... Read more

Forum topic

Hello everyone,

For those I have yet to meet, I'm Jen, the latest member of BuildingGreen's Peer Networks team.

Although it's been a few weeks now, we wanted to share the slide decks from some of the presentations that took place in Las Vegas back in June. Thank you to those of you who presented and who have given us permission... Read more