The Center for the Built Environment (CBE) at the University of California, Berkeley is conducting a survey to understand current practices and outlooks among design practitioners: architects, engineers, energy modelers, and related professionals. Our goal with this work is to improve climate change adaptation guidelines that support building... Read more

Thought this was worth sharing - Lance Davis, who manages the P100 program for GSA just posted to an email group i belong to that the GSA P100 program is to be updated in 2024.  In service to that, there is a "P100 Change Proposal Form" available for folks to make helpful suggestions.

They are asking for suggestions, i think we should... Read more

Welcome to the quiz portion of Better Choices in Low-Slope Roofing.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain life-cycle impacts, health and environmental hazards, and durability of low-slope roofing options.
2. Classify situations for which reflective roofing... Read more

Has anyone here found an alternative to XPS for the void former?

A structural engineering contact was included in recent conversations about embodied carbon in insulation materials and brought to our attention that this is a common use for XPS that has nothing to do with its insulating properties. It is typically used where concrete is... Read more

Hive mind,

We recently learned that 3M has discontinued the production of their 3M Daylight Redirecting Film (https://www.3m.com/3M/en_US/building-window-solutions-us/solutions/dayli...). This product was selected by an architecture client last year as the optimal daylight/glare control strategy for a school project, and we're assisting... Read more

Hi Green Gurus,

In this stressful time, I think it is important for us to continue to feel connected and supported.  Also, it is difficult to come to terms with the reality of what is happening.  So, I thought it would be helpful for us to share some information about the response of our respective firms to the Coronavirus.

The... Read more

What better way to follow up the magic of a live presentation from Peter Yost than with 30 free days of BuildingGreen Premium?

Hello,

I will be in NYC for Regenerative Metropolis event at the end of Climate Week NYC. Is anyone else going to Climate Week? Did any events seem particularly worth attending? I've not been before but the only thing I've signed up to is the Nature-Inspired Solutions for a Sustainable Future on Wednesday night at COOKFOX.

ASHRAE 209 in all its glory has been uploaded. This will impact our architectural process, for better or worse, so we should embrace it and learn from it. The revised AIA Energy Modeling Design Guide (due out next year) has been timed to correspond roughly to 209 coming out and will include references to it. The first few energy modeling '... Read more

Hey All!

One of the initiatives from our first meeting in Chicago was to gather and develop resources related to plug and process loads in buildings which will help us all with: energy modeling, equipment sizing and power distribution.  We had our first call this morning and are rolling.  Aspirations are that this could turn into a... Read more

Hi, we need 3-4 folks to volunteer to join us to work out a draft Materials section for the Contractors Commitment.  Meeting set for 6/16 @ 2 PM CST.

Please message me at pslloyd@leopardo.com if interested in participating.  I will forward out the meeting invite. If the time doesn't work, but you want to participate, I will share info in... Read more

All--

A few months ago, I sent around a note about an article I was writing about the state of post-occupancy studies. It finally came out, in the latest issue of Metropolis. Great quotes and work from Payette, EDR, KieranTimberlake, HKS, and others. Thanks to all for helping with this.

I don't believe it's available online yet,... Read more

Morning SDL,

Working on a midwest lab and trying to make the case for electrification in a slower greening grid with a reluctant MEP team. Here are a few sources I have checked for case studies:

Does anyone know of a good summary of state and local energy code adoption for new building and ordinances for existing buildings? I know of this energycodes.gov site, but it feels somewhat misleading when you dig into it. For example, in CO, it suggests there is no min code, but there is, and it doesn’t show the extent to which local govs are... Read more

I wanted to share some thoughts from Brenda Stanfield about the Design for Freedom conference and the work that she is doing to fight the difficult problem of forced and child labor in construction materials.I feel like it is a step up from the LEED social justice pilot credits, which are a great start. Hopefully it helps you in your work. I am... Read more

Hello all,

My name is Stephen Messinger.  Thanks for including me in the group.  I am excited to get involved.  Glad to see some familiar and amazing names on this list.  

A little about me: I am born and raised in Massachusetts.  I live in Jamaica Plain (Boston) with my wife Lauren and two amazing daughters (Penelope, 4.... Read more

Greetings!

Back again re: the work we're doing with City of Cambridge, in their great leadership efforts to develop EC policy/regs/incentives and reporting requirements.

Thanks to those who responded earlier about the effort it takes you to conduct WBLCA - now we're diving into it in more depth and wanting to get together a focus... Read more