Welcome to the quiz portion of Wood: What’s Good?

Learning Objectives
Upon completing this course, participants will be able to:


This might be going down a rabbit hole, but in moving to California this year I noticed that "zero net energy" (ZNE) is the standard term, whereas "net zero energy" (NZE) was more common back east. The DOE's 2015 definition (below) uses "zero energy building" (ZEB), which to me implies a building uses no energy at all.

Regional... Read more

Greetings Gurus, following the AIA COTE Design for Economy concept, does anyone have a resource for a list of building efficiency ratio "targets" by space type? I've always struggled with this initiative. 

Welcome to the quiz portion of Fundamentals of High-Performance Building Assemblies.

Learning Objectives
Upon completing this course, participants will be able to:


1. Recall how the acronym ENDURE speaks to the unifying aspect of high-performance buildings.
2. Describe how to apply the principles of high-... Read more

CEUs are available for reading all the building-envelope product guides and primer. Click here to learn more and take the quiz.

Water and air that penetrate building assemblies can damage materials, cause energy loss, and lead to mold, mildew, or other problems. The products used to address these may contain materials that are... Read more

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

Buildings aren’t garbage. But you wouldn’t know it by examining the way the AEC industry works. 

We typically design buildings for a single, limited purpose. We build them partly out of plastics that can’t be readily recycled. We choose diverse materials... Read more

Hello all,

I've been in communication with a few of you already, but for those who don't know me - my name is Jen and I'm a new member of the BuildingGreen team helping out with the Peer Networks. I've already been learning a lot, and I'm looking forward to getting to know the SDL Network and its members better!

Here are the... Read more

Hello, what acceptable levels of air quality are you using to evaluate natural ventilation strategies for your projects?  In our Living Building we only open windows when PM10, PM2.5, etc. are within LBC and WELL limits.  In a seasonally smoggy urban environment, this limits how often we can utilize natural ventilation even if the outside... Read more

Does anyone have an experience on recycling/reusing architectural glazing? We have a sizable glazing replacement project, and I am realizing how difficult it is to find a way to prevent the glazing from going into the landfill. So far, I have reached out to Terrazzo (aggregate) manufacturers, Glass Recycling Coalition, Architectural Glass... Read more

We're looking to expand our design performance group - let Peter or me know if you have someone to recommend to us! Here's the description. 

With an urgent climate justice mission, AIA has the call open for volunteers to help shape our industry's action. COTE, the Codes + Standard Committee (one of the most important committees anywhere!), Board Committees (including the Committee on CLimate Action and Design Excellence - CCADE)  and the Strategic Council have openings. Consider how... Read more

Hello Green Gurus,

We’re happy to see the first round of summit registrations rolling in! We’ve had lots of questions about specific topics for the sessions. As usual, the agenda will be based on topics that are top of mind for you.

Whether you are already registered or not, please fill out the Pre Summit-Palooza Survey to help us... Read more

Has anyone had any success with achieving the LEED Building Envelope commissioning points with an alternative compliance path using the requirements of the PHIUS verifier? It seems like an unnecessary duplication to ask the client to pay for a BECx agent and a Passive House verifier. Or am I missing something? I can't find any LEED... Read more

I was wondering if any design or contractor friend here can kindly share the carbon emission factor of excavation during construction. 

I found a paper that provides energy use rate per cubic meter and associated carbon emission in kgCO2 for different phase of construction such as excavation earth work, pouring and lifting concrete,... Read more

Are FSC glulams available? By many manufacturers? Which ones?

Hi everyone,

Since I know we have a lot of talented people in this group, I'd like to reach out to those of you based in Los Angeles and see if anyone is interested in talking at an upcoming Living Building Challenge collaborative event.  The topic of the meeting is "Selecting Healthy Materials 101: From the perspectives of... Read more

Hi, all.

Has anyone used Unicel's Timber Curtain Wall System? It uses engineered glulam wood mullions on the inside with aluminum mullion caps / butt joints. Has anyone gotten close to using it, but couldn't get it procured for a particular reason? They note up to 72% more energy efficienct than a conventional aluminum curtain wall and... Read more