Embodied carbon in products and existing buildings. What does LCA tell us about renovation vs. new construction and material choices?

Guiding Questions: 

This are opportunities for us to get involved as design and construction allies with the new administration and the US Department of Energy on more efficient building.

The first link below is for low-carbon projects that will provide the case studies and solutions that the industry can follow.  The second is identifying barriers and... Read more

MSA has issued a safety advisory because they have received field reports that their green colored MSA V-Gard Protective Caps are cracking. Please share this with your safety staff if they do not already know. Let's keep everyone safe!

I'm passing on an alarming (and truly Orwellian!) message from the AIA that some may have received:

The AIA is aware (and has been actively addressing) that there is a draft executive order circulating for consideration by White House officials that would officially designate “classical” architecture as the preferred style for the... Read more

The BuildingGreen Guide to Thermal Insulation provides detailed guidance on insulation products and practices, including recommendations on what insulation to use and what to avoid. It's a treasure trove of information for architects and designers, builders, and anyone who is actively considering the impact of insulation on the quality of your... Read more

Good daylighting intentions can end up increasing glare and solar heat gain.

BuidlingGreen-Approved Lightshelves

We look for lightshelves designed to reflect direct sunlight onto the ceiling, turning what could potentially be glare into diffuse, ambient daylight that penetrates deep into the interior of a building.

Energy... Read more

Hello all,

Thank you so much for your work on the Contractor Commitment. In preparation for the Summit, we've pulled all of the sections together into one cohesive document. We would like to invite everyone in the SCL network to review and comment on this latest draft so that we can compile comments before Wednesday and make the most of... Read more

Hi Fellow SDLers: I'm sure you're like me and thrilled at the news of the Senate's passage of the historic climate bill yesterday. And also are likely on pins and needles until it's passed the House and signed into law. What a conclusion of a terrible roller-coaster ride that is our Congressional system.

I'm writing to pass along a... Read more

I was recently asked about potentially specifying concrete with wood nanoparticles and concrete with biochar as a way to further lower the embodied carbon and to increase concrete strength.  These approaches are something I know nothing about, and wondering if anyone in this group has any experience and/or observations that might be relevant to... Read more

Hey all,

Question for those of you who do in-house daylight analysis about modeling translucent glazing.

We use ClimateStudio for our modeling. It has plenty of material options for clear glazing but nothing for translucent glazing, and we are trying to understand the impacts of a translucent interlayer at some skylights. We can... Read more

Hi Green Gurus,

We have recently had a beloved member of the HKS DesignGreen team relocate to Toronto due to work visa challenges in the US. Our loss could be your gain if you have an office in Toronto! We are hoping to collect a list of leads for him once the dust settles on his move and he begins his job hunt. If you have any... Read more

Hello Everyone,

LHB continues our search for a Regenerative Design Specialist to oversee our multi-discipline firm's goal to reach regenerative design.  This is a leadership position with unique opportunities to influence architecture and engineering across many market sectors. 

We understand it's been an exhausting year and that... Read more

I am working on a new community development in St. Paul that is striving to achieve net-zero energy. We are able to get there mathematically by using the extra generation on light industrial rooftops to offset medium-density housing energy use (all buildings are anticipated to have different, private owners). However, this puts us over... Read more

Welcome to the quiz portion of Energy Modeling: Early and Often.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain how energy codes and standards are pushing commercial projects beyond what they can do without modeling.
2. Describe the energy and cost-savings benefits... Read more

Bobbie Socks

I'm sure may are familiar with Aqua in Chicago, and Joe Lstiburek's article on thermal bridging. (https://buildingscience.com/documents/insights/bsi062-thermal-bridges-redux) We have similar problem with a project that is a residential highrise building, concrete structure. Here is my questions. Will energy simulation be able to pick up the... Read more

Hello, does anyone have experience with thin film solar? We're looking to add it to a city wide bus station application. Thanks!