Does anyone know where one can locate weather files (EPW) that has predicted future data for climate change?

Thanks in advance.

I'm writing an article surveying and comparing various embodied carbon tools, including whole-building LCA tools. I'm looking for interviewees who have used at least TWO of the three major LCA tools currently in use in North America (Tally, Athena IE, and One Click LCA). If you've tried all three, all the better! If you or someone in your firm... Read more

Someone made a tombstone to mark Internet Explorer’s end-of-support date

https://www.engadget.com/internet-explorer-tombstone-175433997.html

Hi everyone - in doing a carbon footprint for our firm, does anyone know if buildings that we design as Architects considered scope 3 emissions, or are they beyond the boundary of emissions? LMN's buildings, despite best efforts, are cumulatively multiple orders of magnitude above our scope 1 and 2 emissions. We have never included these... Read more

Looking for an example or case study for a building utilizing a radiant heating/cooling in climate zone 4a. General use type is office with some public assembly spaces, total of 85,000 sf.

As usual, everyone, especially mechanical engineer, is terrified by the thought of "condensation." So far, I read a DGWW case study, "Energy... Read more

Exterior paints, stains, and primers—particularly alkyds—can have very high volatile organic compound (VOC) levels and can contain numerous chemicals of concern.

BuildingGreen-Approved Coatings

BuildingGreen lists exterior coatings that meet the South Coast Air Quality Management District’s (SCAQMD) VOC requirements of 50 grams... Read more

Hello all, 

Any Fitwel experts out there? I have a 30,000 sf boutique hotel + spa client who would like to certify under the Fitwel rating system but Fitwel folks are telling me that no scorecard is currently available to hotel clients (can't use mulit-tenant or resi, that a hotel scorecard is under development). Has anyone used Fitwel... Read more

Hello all,

I need future weather files for a project. We are looking at three years, 2050, 2075, and 2095 using two climate change scenarios, low emissions, and high emissions. I have seen ARUP's Weathershift site that uses RCP 8.5 and RCP 4.5. Are we assuming that 2.6 is not achievable? I would have used this as a low emissions scenario... Read more

Here is a fundamental question regarding measuring operational carbon emissions that I'm sure many of you can clarify for me:  Let's say you are considering design options and you want to know the relative contribution of GWP of adding an additional inch of continuous insulation to the building envelope.  The GWP from embodied carbon will... Read more

Welcome to the quiz portion of How To Run a Great Workshop: 37 Tips and Ideas.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain how the right mindset contributes to a successful design workshop.
2. Schedule a design workshop, set its agenda, and balance the skills of its... Read more

This webcast was pre-approved for 1 AIA LU|HSW and 1 GBCI LEED-specific CE hour.

Please complete the survey questions to confirm your attendance and receive your CEUs.

By providing your credential numbers in your profile, you will enable us to automatically report these CEUs to these organizations. Please check your profile to... Read more

A new article addressing whether PFAS finishes on upholstery fabric actually work (Spoiler alert - they don't) has been published and can be found here:

https://journals.sagepub.com/doi/10.1177/24723444231159856

This is authored by the fine folks at Green Science Policy, Arlene Blum's group that is the source of the Six Classes of... Read more

Under a high carbon scenario, most of North America will be 2 degrees C hotter by 2050. Meantime, we're designing buildings that will still be around in 2050, to codes that don't yet factor in chronic risks associated with climate change. I want to explain these risks to my colleagues; I'm hoping some of our green gurus can help answer the... Read more

Axel Slowin

My name is Douglas Flandro. I am the sustainable design leader at CambridgeSeven in Cambridge, MA. I started my career in film and theater design. I moved into museum exhibit design with a graduate degree in interior architecture at the Rhode Island School of Design in 2003. I still design museum exhibits for science museums, nature visitor... Read more

Hi friends,

We recently tracked our water consumption on site during the structural demolition of some existing reinforced concrete buildings.  The new OSHA silica regulations required us to keep dust to virtually zero, so we had a bunch of mist cannons and water hoses pumping water around the clock.  We consumed ~855,000 gallons in a... Read more