Hi all,

We have a project in New Orleans that needs to meet the GSA Inflation Reduction Act (IRA) requirements and submit EPDs. For our concrete, there is only one manufacturer that meets the requirements and is more than 50 miles away (according to EC3). Does anyone have tips on attempting to talk to local concrete manufacturers about... Read more

Hi all, 

I have a project where we are providing the main sustainability lead role, but are in need of an LBC sub to provide additional expertise (and fulfill a contract requirement). We are ideally looking for someone who has experience with more than one project that has completed the process, and especially for (large) commercial... Read more

What general forums do you want (in addition to the Best Practice forums)? On LEEDuser we have "Forum quick links" in the left sidebar that cover general topics:

https://leeduser.buildinggreen.com/forums

For example, you could have:

General questions Using BITbuilding.org

and any other category that isn't restricted to a... Read more

Welcome to the quiz portion of Whole-Building Life Cycle Analysis: Promises and Pitfalls.

Learning Objectives
Upon completing this course, participants will be able to:


 

1. Define whole-building life-cycle assessment.
2. Explain what whole-building life-cycle assessment can and can't do so you can work within... Read more

Peeps, in case you haven't gotten the email blasts--the AIA wants YOU! Now is the time to throw your hat into the ring for volunteering on the following committees/groups: 

2030 Working Group (with Keith Hempel! and Ashley Mulhall!) A&D Materials Pledge Working Group (build on the amazing work Lona Rerick and others have been doing for... Read more

Conventional asphalt and concrete contribute to excessive stormwater runoff and pollution.

BuildingGreen-Approved Pavements and Pavers

We look for products that improve on the environmental characteristics of asphalt as well as permeable alternatives to concrete. These include:

asphalt and concrete mixes incorporating high... Read more

Hi all, hope you're keeping safe and healthy. I'm thinking about protocols to put in place on jobsites related to COVID-19 in addition to our IAQ plans. Wondering if anyone's company has started to layout specific protocols, PPE, etc. and is willing to share.

What got me thinking was this article from Prof. Joe Allen at Harvard about... Read more

Mithun has a part-time employee Jake Minden who is a graduate student at the University of Washington. Jake is participating in a year-long research fellowship focused on equitable design practice. He has developed a survey to collect perceptions of workplace culture. 

Please consider taking 10-minutes to help gather this valuable... Read more

Building materials emit massive amounts of carbon long before the lights go on.

In this course, BuildingGreen takes an analytical look at the greenhouse gases that are emitted in the process of constructing our buildings in the first place—the embodied carbon. The report focuses on how architects and designers, working with other key... Read more

Has anyone used a commercial heat pump water heater for a large protect?  I have found a few manufacturers for this technology, but want to make sure this is a viable and cost approach to electrical eliminate gas on a path to all electric.

Hi all,

I'm trying to figure out how to use this CLF MEP calculator tool that is downloadable from the CLF website. Please see screenshot attached - does anybody know what they are asking for as an input?

"Custom quantities input: The user can enter custom quantities on this tab and produce numerical results. For data input fill '... Read more

Hello SCL members,

A gaping hole has been left since Patty Lloyd stepped down from our SCL steering committee. Don't worry, she is still in the network and tirelessly championing SCL. But this means we are opening up nominations for at least one leadership spot. If you are interested, please email me directly (candace@buildinggreen.com)... Read more

Looking for an example or case study for a building utilizing a radiant heating/cooling in climate zone 4a. General use type is office with some public assembly spaces, total of 85,000 sf.

As usual, everyone, especially mechanical engineer, is terrified by the thought of "condensation." So far, I read a DGWW case study, "Energy... Read more

Welcome to the quiz portion of The Urgency of Embodied Carbon and What You Can Do About It​​!

Learning Objectives
Upon completing this course, participants will be able to:


Define “embodied carbon” and explain why embodied carbon is a significant source of greenhouse gas emissions, which threaten health and safety... Read more

We are embarking on our first CLT projects (our at least we hope that they go that way). Would anyone with experience be willing to share some thoughts from the architect's perspective on things to consider, lessons learned, etc?

Help. I have a contractor in need of advice on IAQ testing agencies and I'm largely uninformed about the local market of IAQ testing agencies. Anyone have organizations they'd specifically recommend or not recommend?

Feel free to email me directly if you'd prefer - awilson@ayerssaintgross.com.

Aley

I would like to invite you to come see the progress of the Oakland EcoBlock on 4/21! Page is co-presenting at the ULI event and we have been pulling together the latest material. It would be great if you can join!

Posted yesterday on the OEB web page https://ecoblock.berkeley.edu/news/ Sign up here: https://sf.uli.org/events/detail/... Read more

Hello lovely Green Gurus. Hope you all are well. I am wondering if anyone has installed an indoor sports floor that performed well and is low-emitting. This is for a multi-purpose gymnasium at a community center. Any chance?  Thanks All!

Welcome to the quiz portion of Ten Strategies for Growth in a Recession.

Learning Objectives
Upon completing this course, participants will be able to:


 

1. Understand the importance of diversifying.
2. Restate the benefits to doing energy-modeling analysis very early in the design process.
3. Discuss how... Read more