Greetings,

I'm looking for recommendations from this esteemed group for 3rd-party vendors/verifiers of GHG emissions to support our CSR initiatives. We currently have a provider, but our company has grown to the point to where we need to transition from "analaog" reporting (location by location) to a higher level of service offering (... Read more

Hello Green Gurus,

Here is the information for August's Peer Networks Webinar, Using a Circular Economy as a Framework for Zero Waste, Zero Energy + Zero Carbon. We hope you will join us!

Register HERE.

Using a Circular Economy as a Framework for Zero Waste, Zero Energy + Zero Carbon
Monday, August 23rd, 2021
... Read more

Hey gang,

We're working on a project that's currently designed as mass timber. We're up against some cost control efforts (of course) and the CM/Client is asking about changing some of the building to steel or green steel. We set out with a goal on the project that within the core and shell, Module A GWP emissions will be net zero.... Read more

If you haven't already, please post a brief introduction to the group with your firm, the roles you play especially as they focus on sustainability, a bit about your background and anything you are particularly passionate about. Thanks! 

Welcome to the quiz portion of LEED 2009: The Missing Manual.

Learning Objectives
Upon completing this course, participants will be able to:


1. Stay abreast of changes to LEED NC-2009.
2. Understand the more ambiguous aspects of LEED NC-2009.
3. Explain key interpretations of LEED NC-2009.
4.... Read more

I came across these open roles recently on Gensler's career page. Sharing them here if there is any interest in this group. As I understand it, though the roles listed are in NYC and NJ, they would be OK if the person reported to one of the following offices: NYC, Morristown, Boston or Toronto.

Sustainability Specialist – NJ: https://... Read more

The Sustainable Construction Leaders peer network brings together the most committed sustainability directors from leading construction companies throughout the U.S. and Canada. We invite you to apply for membership.

test

Good Morning everyone.  i just wanted to send Congratulations out to the new class of fellows, with a shout out to Jonathan Weiss, Paul Hutton, and Ramana Koti.

Well done Gentleman!

Dear SLD-ers,

We have a project team considering the use of copper cladding for a high profile project in Vancouver. The preference is to use pure copper that is pre-patinated and does not have additional coatings.

We are attending a CEU from the Copper Development Association to understand options and environmental impact, but we... Read more

Has anyone found any options to recycle safety vests, or discovered an upcycling option for them?  We are about to replace all of our vests company-wide and will have thousands that we don't want in the waste stream and we don't want to be reused as safety vests.  Any thoughts or ideas would be great!

Thanks and I hope everyone is... Read more

I have to admit that I wasn't particularly paying attention to LEED during Greenbuild, but anyone recall the "big announcement by USGBC" that LEED v4.1 is coming?

Article can be found @ Green Building Law Update by Stuart Kaplow and the title is "LEED v4.1 Announced by USGBC at Greenbuild."

https://www.greenbuildinglawupdate.com/... Read more

Gypsum is calcium sulfate dehydrate, which is mined or produced as a byproduct of flue gas desulphurization (FGD) from coal-fired power plants. FGD gypsum may contain trace contaminants from coal processing, but not enough to represent a hazard to users. Years ago, some imported products created indoor air quality problems that required... Read more

Hi Advising Leaders!

Lets get this forum going by introducing ourselves (yes, I know we mostly know each other, but just to be sure). And sharing what's most exciting and/or bugging us these days. Oh, and if you haven't already, please fill out your BG.com profile with a picture and bio. 

I'll start. I'm Nadav, president at... Read more

Greetings Gurus!
Please sign up and spread the word (even if you can't attend, sign up and get follow up info!)

This is one of a series of Hackathons to crowdsource alternative design details that are intentionally meant for disassembly! The outputs are meant for public consumption so that anyone who doesn't have time (that's... Read more

consider supporting Varun Kohli for AIA Board At-Large seat

If you are a voting delegate for the AIA, please consider casting a vote for my friend and COTE colleague, Varun Kohli, FAIA; he's running for the At-Large seat on the AIA national Board of Directors.

Varun is a former COTE Leadership Group member and he understands... Read more

Hi folks,

Any of you who have completed WBLCA for projects - we are working on a new initiative with the City of Cambridge (building on our prior work NZ Climate Action Plan) but this time focused exclusively on embodied carbon.

We have not yet begun the work - but they have an opportunity to make a move on this on Tuesday and... Read more