I was wondering if any design or contractor friend here can kindly share the carbon emission factor of excavation during construction. 

I found a paper that provides energy use rate per cubic meter and associated carbon emission in kgCO2 for different phase of construction such as excavation earth work, pouring and lifting concrete,... Read more

Exterior doors often have poor insulation and seals that allow air through.

BuildingGreen-Approved Exterior Doors

BuildingGreen has different criteria for commercial and residential exterior doors.

Commercial swing (hinged) doors must be NFRC-rated, certified, and labeled for U-factor. They have a maximum air leakage of 0.... Read more

Hi there Hive Mind! Hope everyone's doing well and staying cool in the heatwave all over.

An engineer on one of my projects reached out about contact switches for operable windows that are empowered to shut down the associated FCU in dormitory bedrooms when the window is open. This functionality allows the FCU to run at something like... Read more

Welcome to the quiz portion of Introduction to Fitwel Certification: On-Demand Webcast.

Learning Objectives
Upon completing this course, participants will be able to:


1.  Identify the different categories within Fitwel and the particular human health and wellness aspects.

2.  Describe the differences between Fitwel... Read more

Hi SCL, 

Just thought I would share an interesting piece from Construction Dive about a lack of guidance on when to halt work due to bad air quality--from wildfires or otherwise. A few SCL companies are mentioned here as having their own policies, but I was pretty shocked to learn that this isn't required by OSHA. 

https://www.... Read more

All--

Metropolis magazine asked me to write a long piece about the current state of post-occupancy studies. I'm wrestling with whether to do it and how to approach it, but it would be helpful to hear your thoughts on the following--

--importance of the topic

--typical and atypical approaches and criteria

--examples... Read more

Hello Sustainable MEP Leaders!

Over the weekend BuildingGreen received an inquiry about connecting with this peer network regarding a project. Please review David Cohan's email below to see if it is something of interest for this group.

We would invite you to reach out directly to David Cohan and let us here at BuildingGreen know... Read more

Hello, what acceptable levels of air quality are you using to evaluate natural ventilation strategies for your projects?  In our Living Building we only open windows when PM10, PM2.5, etc. are within LBC and WELL limits.  In a seasonally smoggy urban environment, this limits how often we can utilize natural ventilation even if the outside... Read more

Does anyone have an experience on recycling/reusing architectural glazing? We have a sizable glazing replacement project, and I am realizing how difficult it is to find a way to prevent the glazing from going into the landfill. So far, I have reached out to Terrazzo (aggregate) manufacturers, Glass Recycling Coalition, Architectural Glass... Read more

Hi, all.

Has anyone used Unicel's Timber Curtain Wall System? It uses engineered glulam wood mullions on the inside with aluminum mullion caps / butt joints. Has anyone gotten close to using it, but couldn't get it procured for a particular reason? They note up to 72% more energy efficienct than a conventional aluminum curtain wall and... Read more

Hive mind,

We recently learned that 3M has discontinued the production of their 3M Daylight Redirecting Film (https://www.3m.com/3M/en_US/building-window-solutions-us/solutions/dayli...). This product was selected by an architecture client last year as the optimal daylight/glare control strategy for a school project, and we're assisting... Read more

Hello all,

I've been in communication with a few of you already, but for those who don't know me - my name is Jen and I'm a new member of the BuildingGreen team helping out with the Peer Networks. I've already been learning a lot, and I'm looking forward to getting to know the SDL Network and its members better!

Here are the... Read more

Has anyone here found an alternative to XPS for the void former?

A structural engineering contact was included in recent conversations about embodied carbon in insulation materials and brought to our attention that this is a common use for XPS that has nothing to do with its insulating properties. It is typically used where concrete is... Read more

Welcome to the quiz portion of Measuring Energy Use in Buildings: Do Our Metrics Really Add Up?.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain the differences between site energy, source energy, and energy cost.
2. Summarize three ways in which source energy can... Read more

Greetings, SDL network - We are attempting to resolve an issue with how data center projects calculate baseline EUIs for the AIA 2030 Commitment and could use some help from this network. With projects that comply with code prescriptively (i.e. not energy modeled), we have found the default baseline assumptions within the DDx platform are not... Read more