Hi Friends, 

I'm working on an SOP for construction waste management for LBC core and LBC materials petal projects and wanted to get your input on the comingled facility requirements. According to the guidelines, any waste that goes to a comingled facility must be a facility that has an average diversion rate of 80% or higher as a... Read more

Was anyone else surprised to see ASHRAE 228-2023 using eGRID Subregions for both the Regional Electricity Source Energy Conversion Factor and Regional Electricity Greenhouse Gas Emission Factors? In the past I have used eGRID sub-regions but also State and local utility conversion factors depending on what energy or operational carbon story I... Read more

I give you... the content-ready site. The editors should be able to start adding Best Practice content.

Development site: 
https://live-bituser.pantheonsite.io/

Instructions (with tutorial videos):
https://docs.google.com/document/d/1EUIzitkW0CczFQo8V2q3gVDVO4Juk4EI9iv8...

I created accounts for all the editors... Read more

Hi Folks, anyone in Boston (or willing to move) this could be a super cool opportunity for you! 

https://careers-bpda.icims.com/jobs/1557/senior-resilience-design-reviewer/job?mobile=false&width=805&height=500&bga=true&needsRedirect=false&jan1offset=-300&jun1offset=-240

We are cautiously rekindling the age-old debate: how are we balancing modeling software for design /visualization and performance analysis during early phase of design.  

We are heavy SketchUp users for early design, and most of our staff have access to COVE tool for early performance analysis. Problem is, I’d rather use Revit to COVE... Read more

Hi all,

Jacobs is looking to hire specifically for sustainability needs! We have a current job posting for a Senior Sustainability Specialist now up, and anticipate a similar posting soon for a mid-level person as well. Location for these would be in the Mountain or Pacific time zones, remote work is fine; other future anticipated posts... Read more

Hey, team. Would it be possible to get premium access to LEED User while we're developing the best practices resources? (without subscribing to it- I don't LEED consult any longer)  Southface has basic membership, so I can't see what's available, etc. Thanks.

Does anyone have an idea when the AIA Materials Pledge Reporting Framework will be available? Or is there a draft of what it looks like? 

BWBR is on a push to refine our approach towards materials. As AIA Material's Pledge signatory, we were hoping to incorporate the reporting framework into our efforts. Trying to get a sense of the... Read more

Dear all,

A mechanical engineer on a healthcare project we are working on has asked for help in dividing the ventilation calculations between ASHRAE Standards 170 and 62.1; can anyone here help shed some light on it?

"This is the first time I am working on LEED for a hospital and I am not sure how the template wants me to show... Read more

Welcome to the quiz portion of Resilient Design: 7 Lessons from Early Adopters

Learning Objectives
Upon completing this course, participants will be able to:


1. Recount the ten resilient design principles.
2. Recount each of the seven fundamental messages embraced by the model practitioners.
3. Describe... Read more

Hi all - Reflecting on the COTE Top Ten Awards and Lloyd Alter's recent article  https://www.treehugger.com/green-architecture/keep-aiacotes-its-time-scrap-aia-awards.html, I am curious how many local/state AIA awards programs have incorporated sustainability reporting metrics as a requirement for all awards submissions, not just for categories... Read more

Hi All - I wanted to share out the All For Reuse initiative below by two peers in the sustainable materials management network. I know some SDL have already done much research on this from quite a few angles, and those with LBC experience probably even moreso in practice. 

Frances Yang (Arup) and Andrew Ellsworth (Doors Unhinged) have... Read more

Food waste is a major source of greenhouse gas emissions from landfills due to methane released during anaerobic decomposition.

BuildingGreen-Approved Composters

BuildingGreen approves in-vessel commercial composters, which require the smallest footprint and are most likely to be suitable for a densely populated area.

Why... Read more

An elevator system can account for 4%–10% of a building's electric energy load, without considering impacts on heating and cooling. Conventional finishes are also common.

BuildingGreen-Approved Systems

We approve the most efficient tension elevators from leading manufacturers, including models that incorporate:

Hi All,

I want to share this report, released today, that I and some other folks on Green Gurus have been working on.  The report dispels the myth that Zero Energy Buildings cost more (specifically in Massachusetts) and it goes further, making the case that Zero Energy Buildings are actually great investments.  Take a look, tell us what... Read more