Hi Shane and Dennis,

What return address should we use for BIT User forum notification emails?  Ben suggests something like no-reply@bit-user.org but whatever you like is fine.

Once you decide, please let us know who controls the domain name (e.g. bit-user.org or bitbuilding.org).  Ben will send them instructions for editing the... Read more

Ali Flynn and Alejandra Arce Gomez are planning a breakout meeting for the Waste Managment Group for all interested. 

Please fill out the doodle poll below so that we can find a good time:

https://doodle.com/poll/qxd4zxrw9xzrxwc6

Ali and Alejandra have drafted an updated version of the Commitment for Waste (attached) after... Read more

Hi all,

As discussed in our monthly meetings, we are assembling an industry push to expand the availability of embodied carbon data for MEP equipment. Our first steps are to send a letter to industry announcing a call to action and future educational webinars on the topic. In a similar manner as the electrification letter by the SMEP... Read more

Hi everyone,

Since I know we have a lot of talented people in this group, I'd like to reach out to those of you based in Los Angeles and see if anyone is interested in talking at an upcoming Living Building Challenge collaborative event.  The topic of the meeting is "Selecting Healthy Materials 101: From the perspectives of... Read more

Hello All,

A group of us (three architects and a builder- sounds like there should be a joke here) were debating this and we  are stumped.

Application: Residential exterior trim.

50 year warrantied composite product of agricultural byproduct with PVC (EPD not published yet) vs 100 year (if primed on all sides and painted or... Read more

I wanted to alert you to this opportunity to help develop a new ASHRAE Standard. They are especially looking for people who have not served with ASHRAE previously (aka the usual suspects)

ASHRAE Standard 242P, Standard Method for Calculation of Building Operational Greenhouse Gas Emissions

1 Purpose: This standard provides a... Read more

Quiz body

Welcome to the quiz portion of The Four Core Issues to Tackle for Resilient Design (And the Programs That Can Help).

Learning Objectives
Upon completing this course, participants will be able to:


1. Use site-specific hazard analysis to evaluate a project’s resiliency demands.
2. Use climate change data to... Read more

Does anyone have an experience on recycling/reusing architectural glazing? We have a sizable glazing replacement project, and I am realizing how difficult it is to find a way to prevent the glazing from going into the landfill. So far, I have reached out to Terrazzo (aggregate) manufacturers, Glass Recycling Coalition, Architectural Glass... Read more

Hi SCL, 

Just thought I would share an interesting piece from Construction Dive about a lack of guidance on when to halt work due to bad air quality--from wildfires or otherwise. A few SCL companies are mentioned here as having their own policies, but I was pretty shocked to learn that this isn't required by OSHA. 

https://www.... Read more

Hello Sustainability Leaders,

Great to see some of you at Greenbuild last week.  Thanks to all who responded to Nadav’s post-election blues post.  Lots of helpful insights and sentiments that left me very grateful to be part of this community.  On a related note, since the election I’ve been asked by people in our office and in life if... Read more

Hello everyone!

I'll be using this thread to post call reminders and notes.

To start us off, the next call is this coming Tuesday, March 24th at 1pm Eastern.

The topics we will be discussing include:

Around the “room” quick check-in. How’s everyone doing? What’s top of mind for you? Able to keep projects and... Read more

Hi, curious if anyone in the group has considered using Fitwel in an existing (built) school project (K-12). 

Would be interested in hearing your experiences and if this tool is a good fit for this type of project.

Office furniture’s materials and components can come from unsustainable sources, and use adhesives that emit formaldehyde or other volatile compounds.

BuildingGreen-Approved Furniture

BuildingGreen approves tables, desks, and other office furnishings certified to BIFMA’s multi-attribute level 3 standard, which requires low... Read more

Hive mind,

We recently learned that 3M has discontinued the production of their 3M Daylight Redirecting Film (https://www.3m.com/3M/en_US/building-window-solutions-us/solutions/dayli...). This product was selected by an architecture client last year as the optimal daylight/glare control strategy for a school project, and we're assisting... Read more

Hi All,

I wanted to share an exciting opportinity with this esteemed group: Placetailor is seeking out a Mechanical Engineer to add to their growing team. They are located in Boston, MA and focus on Passive House, Low-energy Design, and they have for two years running meet the tenets of the AIA 2030 Commitment! This is an exciting place... Read more

Has anyone here found an alternative to XPS for the void former?

A structural engineering contact was included in recent conversations about embodied carbon in insulation materials and brought to our attention that this is a common use for XPS that has nothing to do with its insulating properties. It is typically used where concrete is... Read more