Hello, All,

Does anyone have experience with cove.tool (https://covetool.com/)?  Perhaps for those projects that may not get fully modeled, or as a tool to help set baselines?  It came across our radar recently, and I'm wondering if the subscription might be worth a try.

Thanks! 

Maria

All,

Can anyone suggest a product for the following situation.  We are looking to insulate existing aluminum eterior column covers that have a three inch air gap.  The issue is there is no way to remove the covers without destroying them.  we would like to cut small holes, pump in the insulation  and then cap the holes.  Can anyone... Read more

Welcome to the quiz portion of How to Build Green At No Added Cost

Learning Objectives
Upon completing this course, participants will be able to:


1. Know how to make a value proposition for green buildings.
2. Explain how shrinking a green building and investing in its envelope can reduce first costs of its... Read more

We are coordinating an effort to produce a "Building Reuse Practice Guide for Climate Action" for the AIA.  This is intended as a resource for architects working on major renovations and adaptive reuse, with a focus on reducing energy use, lower embodied carbon, electrification, and adapting to a changing climate. We are looking for around 5... Read more

We’ve reached the maximum capacity of our venue for the Show-and-Tell next Tuesday at Greenbuild in DC. We also have a full slate of great presentations lined up. Thank you, Perkins Eastman, for hosting!

RSVP is now closed—we're looking forward to a packed house and we won't be able to let folks in who are not on the list.

We can'... Read more

Hi folks -

I was contacted last week by the producer of the documentary that launches this Thursday, 12/10 - he is hoping to generate interest among folks across the environmental spectrum (which of course includes all of us!) so I am sharing his pitch below with you all. The subject of water scarcity and drought is only going to... Read more

Hi all-

We are dabbling in developing an official research component of our firm. We have collaborated with a class at a local university and are looking for ways to take our research to a higher level. I'm curious how some of the other firms doing design or building technology research approach the process. For instance, do you have a... Read more

Hi everyone,

I’d like to invite you to join this Friday’s webinar hosted by the Embodied Carbon Network: Using Whole Building LCA to Reduce Embodied Carbon within LEED and Beyond, and to follow up with a tool that I presented at this summer’s Architecture SDL summit, which ZGF has now upgraded and made free to the industry at large.... Read more

Poppy Gasbag

Are you a design or building professional who wants to learn more about sustainability—such as how to do energy modeling, improve the building envelope, or use renewables on a project? Now more than ever, it's time to join the sustainable... Read more

Hi all! During our Contractor’s Commitment call last week Amanda made a great point about sharing of waste data to gain some realistic, current metrics. Just like I assume many of you, we have both seen a decline in successful diversion these last few years and our companies’ overall percentages have taken a hit. In an effort to gain a full... Read more

Help regarding below...

OSHA, see below link, suggests 6' social distancing for unvaccinated or at-risk workers.

https://www.osha.gov/coronavirus/safework#role-employers-workers

Is your office going to maintain 6' social distancing for your workers?   Is the reason above because there are unvaccinated or at-risk workers?... Read more

Hi all,

Has anyone been able to find alternatives to vinyl window film products? I can find solutions for wall coverings, but am not having much luck when it comes to window films. Any leads or insight would be really helpful!

Thank you!

Amanda

Welcome to the quiz portion of Deep Dive into the Integrative Process with Marcus Sheffer (recorded webinar)

Learning Objectives
Upon completing this course, participants will be able to:


On our Contractor Coffee talk a few weeks ago, Emi LaFountain (Turner Construction) brought up the idea that there was a lot of blue stain wood that are being landfilled instead of used, and suggested that maybe the designers among us could find a way to turn ugly into beautiful.

I had never heard of this issue, but I was on a call the... Read more

Hi SDL,

I'm heading to Greenbuild next week and one of my teammates who's not attending has asked me to look for expo hall vendors who are involved in Design for Freedom. He's starting up a new project that he thinks could be a good DFF pilot and wants to get some manufacturer contacts. Is there any kind of informal DFF meetup happening... Read more

Glazing connects occupants to the outdoors, but with so many opportunities for air leakage, poor insulation, and thermal bridging, glazing is the primary weak link in building energy performance.

BuildingGreen approves glazing that offers strong energy performance properties for a variety of... Read more

For those who are visiting Chicago, Kira Gould has asked me to spread the word about a casual AIA COTE meet-up. Stop by, meet friends and have a beer.

If you will be in Chicago on November 15, please consider joining a casual meet-up of COTE leaders/members/friends (no fee to join; it's pay-your-own-way at the pub):  

AIA COTE... Read more