Hi, this is a somewhat niche/specific question - we are working on an all-electric school (middle and high school) that includes a chemistry lab. The lab was going to have portable sources for flame experiments, but there is concern that the portable sources would be unsafe for middle school students, so they are asking for a hard-pipe natural... Read more

We apologize, but the heating fuel cost calculator is no longer on the BuildingGreen website.

Take a look at Efficiency Maine's heating fuel cost calculator instead.

Remember 2013? LEED version 4 had just been released to the public. Hardly anyone was using it, though—not only because they didn’t have to, but also because there just wasn’t a pathway to achieve many of the new credits in the rating systems. Especially the product-related credits in the Materials & Resources category, along with the Low-... Read more

Hi, all - 

Thanks to many folks who connected on the heels of our last matchmaking post. Reaching out on behalf of a former SDL member, Lindsey Perez, to relay an opportunity from MIRACORP linked below: 

https://www.paycomonline.net/v4/ats/web.php/jobs/ViewJobDetails?job=97753&clientkey=957B67314D085A633E5C9C5568F3BC04 

Hello and Happy New Year!

I joined the SAL Peer Network a few months back and I’m really excited to be part of this group, although a bit delayed in my introduction. I’m an architect working as a consultant and managing the Sustainability Department at Entegrity (an energy and sustainability consulting firm) located in Arkansas. I’ve... Read more

Is anyone aware of research or guidance that has looked at VOC’s from roofing products and ventilation intakes? I’ve done some searching, and focus is mainly on managing the construction process to reduce installer exposure. 

Thanks for any help!

Tate

Good morning SALs! Nicole's survey on restrooms inspired me to post a survey of my own.

I’ve been trying to stay useful lately. I've been posting new writing on the industry, much of it complimentary, over on Roberts’ Green Letter. (Yesterday I posted the mission statement, explained via brand-new-puppy pics.)

I have a 1-minute... Read more

Hi all!

I'm working on my first energy positive / passive house multifamily building and trying to figure out the trash/recycling chute. I am curious what solutions you have employed to make the trash chute air tight? We have excluded the whole chute from the envelope. Do you use airtight doors (and which ones?) at each floor trash/... Read more

Does anyone share the same feeling of stagnation? We are supposed to hit 80% pEUI reduction now and working towards 90% mark, but I don’t see it happening for majority of our projects, even the “right” ones that we implemented integrative design process & iterative energy modeling. I am wondering whether anyone would be willing to share... Read more

Exterior doors often have poor insulation and seals that allow air through.

BuildingGreen-Approved Exterior Doors

BuildingGreen has different criteria for commercial and residential exterior doors.

Commercial swing (hinged) doors must be NFRC-rated, certified, and labeled for U-factor. They have a maximum air leakage of 0.... Read more

SDL Show & Tell in Chicago, Tuesday, November 13 from 7-9:30 PM (CST)
HKS | 125 S Clark Street | Chicago, IL 60603

What better way to kick off your time at Greenbuild than with snap previews of the best sessions? The Sustainable Design Leaders Show & Tell is back, brought to you by BuildingGreen and HKS! This event is by... Read more

Hey all,

Question for those of you who do in-house daylight analysis about modeling translucent glazing.

We use ClimateStudio for our modeling. It has plenty of material options for clear glazing but nothing for translucent glazing, and we are trying to understand the impacts of a translucent interlayer at some skylights. We can... Read more

Welcome to the quiz portion of Occupant Engagement: Where Design Meets Performance.

Learning Objectives
Upon completing this course, participants will be able to:


1. Restate at least five methods being used to provide feedback to occupants so that they better understand how to interpret, and respond to, their... Read more

Hello,

We are having a discussion / a bit of a debate in our office about the merits and sustainability of different roofing materials. Our current standard is to use a PVC membrane, which we all know is highly toxic. TPO is an obvious alternative that is less toxic, but it has some performance concerns and can often lead to leaking (not... Read more

Hi all,

GBD turns 50 this year! I would like to share some examples with leadership of how we can make it more than just an event for clients... something that can give back, engage the public, focus on sustainability, etc. I remember that a Seattle firm had an awesome event that engaged a public plaza, etc. I had read something about it... Read more