I am looking for case studies/trying to identify buildings using concrete mixes with upwards of 30% replacement of cement by SCMs.  I've been in conversations with some structural engineers who are interested in lowering embodied carbon in upcoming projects, but would like to see examples of where this level of replacement has been successfully... Read more

Are any of you working on projects that are pursuing the additional point for Indoor Water Use Reduction on a HC project via Table 4 Compliant laboratory and medical equipment? If so, what sterilizers are the projects using?

We are receiving pushback that the Sterilizer metric doesn't make sense. I am interested in any insight or a... Read more

Hi,

I have a colleague doing research on PCM in several projects. For context in their report, they were wondering if this group has seen any recent increase in application of PCMs in recent years. Is it just in ceilings or other applications? If so, what products are being used? They were having difficulty finding manufacturers other... Read more

Does anyone here have a draft spec for low embodied carbon concrete they could share? I see the GSA has a standards sheet with MGWP limits, but we are hoping to actually specify the mix for upcoming projects.

Welcome to the quiz portion of "How to Access the Full Power of Biophilia."

Learning Objectives
Upon completing this course, participants will be able to:


Following up something I mentioned at the summit - the EPA is hosting public comment webinars related to the IRA and construction. The first one seems particularly relevant, 3/2/23 from 2-3.30pm EST “Reducing Embodied GHG Emissions: Construction Materials Prioritization and Environmental Data Improvement”. Good opportunity to have our voices... Read more

Hello everyone,

For those I have yet to meet, I'm Jen, the latest member of BuildingGreen's Peer Networks team.

Although it's been a few weeks now, we wanted to share the slide decks from some of the presentations that took place in Las Vegas back in June. Thank you to those of you who presented and who have given us permission... Read more

Consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur... Read more

Welcome to the quiz portion of Chemical Transparency: The HPD Issue.

Learning Objectives
Upon completing this course, participants will be able to:


1. Discuss why chemical transparency matters and answer common technical and practical questions regarding HPDs.
2. Offer solutions for the legitimate concerns... Read more

Hi everyone,

As you may know the ICC has changed the way the IECC will be written in the future and most of us think that will reduce the stringency of the future energy codes that are the biggest lever in the fight against climate change within the buildings sector.

So one of the best pathways forward is via ASHRAE, which has a... Read more

World: There is no way we can shut down in order to lower emissions, slow climate change and protect the environment.

Mother Nature: Here's a virus. Practice.

Who is measuring the positive environmental impact our actions are having on the environment? 

For example, there have been reductions in air pollution. If the... Read more

Hi friends,

As you might have seen from my op ed last week on BuildingGreen.com, I’m convinced that just voting is not enough; we all need to do all we can to improve our chances of success in this election. My wife Janice and I have been writing get-out-the-vote letters using Vote Forward as our platform. I thought it might be fun, and... Read more

Hi all!

A couple years ago now there was an incredible thread here about circadian lighting design and WELL. There was a lot of dipping toes in the water with intent to gather lessons learned and report back.

What have been the high points and low points of circadian lighting design so far? What seems cost-effective and worth... Read more

In looking for ways to reduce jobsite waste and lower our carbon emissions, I'm working on a business plan for centralized procurement, in lieu of individual project purchasing their own tools, PPE, & consumables.  I'm curious as to how many other GC's on here use (or have used) a central purchasing process and if you have any pros/cons... Read more

Hi all,

Are you looking for a senior level sustainable design position in Canada?  We’re hiring a sustainable design leader and senior sustainable design consultant with location options in Vancouver, Toronto, Edmonton, Calgary or remote (Canada only). https://dialogdesign.ca/careers/current-openings/

I joined DIALOG 10 months ago... Read more

Wood decking requires potentially hazardous preservatives and stains, and plastic waste is a significant environmental problem.

BuildingGreen-Approved Decking

Composite decking approved by BuildingGreen has at least 50% total recycled content. For plastic decking, post-consumer content has to be greater than 50%.

Health and... Read more

Hello all,

The Bay Area SCL contingent has recently published an anti-idling toolkit so contractors can get empowered to enact their own anti-idling policy on their jobsites. We're all in this together - if you haven't already brought this up with your company management, hopefully this toolkit serves as a good starting point. 

... Read more