I have a client that is very interested in automated shades for a mid-rise multi-family housing project. Do you have any examples of projects that have attempted this? I assume it would involve occupancy sensors and/or an over-rideable default setting dependant on sun position and temperature. I also have an MEP Engineer team that is having a... Read more

Dear Esteemed colleagues: I was recently asked a good question in light of the impending (fingers crossed) passage of the reconciliation bill that will bring alot of funding to energy efficiency/decarbonization upgrades at the residential scale. The question is: What are the arguments/ scenarios about the importance for homeowners to contract... Read more

The Sustainable MEP Leaders peer network brings together the most committed sustainability directors from leading MEP design firms throughout the U.S. and Canada. We invite you to apply for membership.

We look for the... Read more

This article just came up in my news feed. I thought you’d all like to read it. I will point out that C&D-specific MRFs have told me that they are really good at single-stream C & D waste, as long as the drywall is pulled out.  Any drywall in a single-stream C & D dumpster ends up in the landfill. Drywall just breaks apart and gets... Read more

Trista Little, Erika Duran, and Paula Melton

Welcome to the quiz portion of Better Steel, Lower Impacts!

Learning Objectives
Upon completing this course, participants will be able to:


Understand the process of how steel is made.

Recount how the U.S. steel industry has been improving its environmental footprint, while improving product performance.

... Read more

Hi: Please check out the fantastic editorial from Ned Cramer at Architect on "The Future of Architecture Education is the Future of Civilization". The deadline to comment on the latest draft of the NAAB accreditation criteria is November 22 and, as in the past draft, it falls far short of prioritizing climate action and sustainability. VERY... Read more

Does anyone up here do or have familiarity with anyone who regularly does NEPA EIS? If you need a definition for the acronym, please see here: https://www.epa.gov/nepa/national-environmental-policy-act-review-process#EIS. I've been asked if I know anything about it, to which the answer is no, but I'd like to get smarter about it and I'm hoping... Read more

Furnaces heat air that is then distributed through ducting and warm-air registers.

Approved by BuildingGreen

Products approved by BuildingGreen include the highest-efficiency, sealed-combustion furnaces and high-efficiency wood or multi-fuel furnaces. A multi-fuel furnace uses several sources of energy such as wood, wood-pellets,... Read more

The COTE Toolkit just launched on AIA.org's site, please go and check it out and share with your networks. The project spanned over the last year+ with over 40 authors, subject matter experts, and reviewers contributing to the process, (including many Green Gurus!)

With the goal of closing the information gap to designing high... Read more

All,

Can anyone suggest a product for the following situation.  We are looking to insulate existing aluminum eterior column covers that have a three inch air gap.  The issue is there is no way to remove the covers without destroying them.  we would like to cut small holes, pump in the insulation  and then cap the holes.  Can anyone... Read more

Hey Everyone!

My firm in collaboration with our architect partner organize the REBUILD conference in Cincinnati on October 5th, so I wanted to make a post for those interested to sign up.

At the 2022 REBUILD Conference, we want to Be Positive + and bring sustainability leaders together to celebrate advancement, advocate for... Read more

Following the summer SDL summit - we formed a spinoff user group called "Carbon Sync" to discuss Life Cycle and Carbon Assessment tools like Tally and Athena.  We've had three successful calls with folks sharing a couple 5-minute presentations about various studies and explorations.  We have a mix of experience levels - but are collaborating... Read more

All,

The current version of the program manual includes ID numbers for the best practices, as shown below. I know we want to keep a quick reference number or ID, but though it would be worth asking if we want to use the below, reorder them in some way, or use a different kind of ID. Opinions?

Thanks,
Jenny

--------... Read more

Hi folks,

We had a fun impromptu conversation on our call last week. We got most involved in the challenge of getting developers interested in taking advantage of IRA Tax Credits. That can be quite a challenge given their business model.

We also heard about emerging data on tradeoffs between embodied and operating carbon, and how... Read more

Hi everyone,

Just a reminder that the first-ever Sages monthly call is happening tomorrow, February 13th, at 12pm ET! We'll be introducing ourselves to each other and discussing our visions for the network. 

Here is the agenda for the meeting, and below is the Zoom info: 

Join Zoom Meeting
https://us02web.zoom.us/j/... Read more

Good morning all,

I'm new to the forum and I am really happy to be here. For the last year or so, I have been working to advance high performance design at Flad, grappling with so many of the issues discussed in this forum. Especially in the context of recent times, it feels really wonderful to join a group of people dedicated to helping... Read more