THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

Concrete is one of the construction industry’s largest carbon emitters, responsible for about 5% to 8% of the world’s anthropogenic greenhouse gas emissions, yet it is also one of the most important building materials.

There are well-proven ways to reduce... Read more

What is the status of the roof insulation market regarding non-halogen containing polyiso boards? I know GAF and Atlas still have them. I thought JM had them as well, but seems to have taken them off the menu. Are there performance issues?

We have a project that is looking for plaster/stucco/textured wall products that are sustainable, or “more sustainable.”

I know these products exist, but I haven’t had to spec or work with any, so I’m reaching out.

The project is in MA, so I'm also soliciting recommendations for products and/or companies who are experienced using... Read more

To piggyback off Nathan's introduction where he mentions construction waste management, who is doing anything innovative or different in managing construction waste?  Construction waste has not historically been a passion of mine, but now working in sustainability and construction, I feel like it has to be by default.  

We have a... Read more

Dear SDL community,

I am supporting one of our health authorities in developing a business case for regenerating healthcare infrastructure as part of the indicative design for a new hospital and cancer centre. While I will be deepening this inquiry through the lens of a PhD over the next few (hopefully 4 or less!) years, I - and we - are... Read more

Carpet is comfortable, offers good sound control, and offers great aesthetic options. But it is typically made from petrochemicals, and carpet and its adhesives can offgas VOCs. It is also a challenge to recycle, increasing the chances that it will be incinerated or disposed of in a landfill. Broadloom carpet cannot be readily repaired if... Read more

We are excited to open registration for the Sustainable Design Leaders Winter Summit 2020! This year’s Summit will take place Jan. 29th - 31st, 2020 at The Lodge, Gulf Shores, AL. The Summit agenda will be shaped by the collective group feedback given in the upcoming pre-summit survey. The Summit begins Wednesday evening (usually 5pm) with a... Read more

At the recent All Networks Workshop in Seattle, I listened with interest to some conversation about including sustainability goals, KPI's, critical materials lists, and other related topics on a G-sheet in the drawing set.  This is something I had not previously considered, but would like to learn more about. 

If you work for a design... Read more

A building project brings brothers back together, but a fast-moving storm challenges the project and the family.
Of storms & chins »

Whistleblowers alert state health agencies to possible foot fungus scourge... Read more

For those who are visiting Chicago, Kira Gould has asked me to spread the word about a casual AIA COTE meet-up. Stop by, meet friends and have a beer.

If you will be in Chicago on November 15, please consider joining a casual meet-up of COTE leaders/members/friends (no fee to join; it's pay-your-own-way at the pub):  

AIA COTE... Read more

Welcome to the quiz portion of Design for Adaptation: Living in a Climate-Changing World.

Learning Objectives
Upon completing this course, participants will be able to:

1. Identify the major known causes of climate change
2. Describe the range and reliability of predicted temperature changes.
3. List... Read more

I think it now qualifies as a tradition! We've arranged a room where we can gather for an hour and check in during the Thursday afternoon reception time at Living Future. If you'll be there, come join us!

Thursday, May 2 at 5:30, Skykomish Room (#604, 6th floor)

We'll be mostly Sustainable Design Leaders, as that's by far our... Read more

Hi Gurus,

As some of you may remember, my spouse, Moshe Cohen did a short negotiation mini-training at SDL some years ago - but there's many of you who weren't there - so this is for you!

He will be doing a training in two parts on Nov 17 and 24th from 9-12 EST. He's the BEST (even objectively!!) and honestly, if you want to... Read more

Hello All,

I'm supporting a project that is pursuing Green Globes and trying to get familiar with its content.  I'm hoping someone might have experience with the program and be able to provide direction toward products that have an OESR.  From what I've read, this is a material ingredient disclosure type report, based on ASTM std. E3182-... Read more

I'm working with the AIA Minneapolis chapter on guidance for small firms related to how and when to energy model. A lot of small firms would like to sign the AIA 2030 Commitment (we had 100 in a room in 2022 in a session led by Nadav and Gwen Fuertes). But we have learned that a) they don't have a good way to energy model small commercial to... Read more

Hi folks,

As you've no doubt heard from us by now (several times), in lieu of Summer Summits this year we're offering a combination of events this fall. Our series kicked off last week with a great Regional Mini-Summit in Boston. Regional events like this were in our plans before COVID blew everything up, so this one was a long-time... Read more

Welcome to the quiz portion of The Cost of Comfort: Climate Change and Refrigerants!

Learning Objectives
Upon completing this course, participants will be able to:


Explain how refrigerants work, the energy challenges they present for design teams, and the opportunities for efficiency and building performance.

... Read more