Hello - Other than hiring an acoustic consultant, I am wondering what in-house tools you are using internally at the design stage for modelling acoustic performance? 

Thanks, Mona

We have a client thats going through a TI remodel in a building thats a LEED Core+Shell certified building. One of the questions we are trying to figure out is are there things we need to be doing to not imperil the building's certification. 

I think the answer is that the landlord had to write tenant guidelines at the time of... Read more

Welcome to the quiz portion of Can Concrete Save Us? Locking Up Carbon in Building Materials

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain current strategies of carbon capture and sequestration (CCS).
2. Detail how concrete offers another possible pathway to... Read more

I have a colleague (lawyer) who is trying to assemble a list of precedent projects that used penalties or incentives for achieving energy targets. The topic she is addressing is how contracts may be changed to address growing climate change concerns.

At the moment, the only concrete example she has is a project in Washington by the US... Read more

Does anyone have install experience with Duracryl yet? I'm looking at it for a large project in place of Marmoleum. We've had multiple instances of install failures with Marmoleum, which leads to lots of finger pointing. 

Lake|Flato is growing our design performance team!  If you know any great applicants for our new design technologist position, please send them our way:

Design Technologist in San Antonio.pdf (lakeflato.com)

Greetings SDLs - I am looking for recommendations for VLT meters that folks have had sucess with (reliability, accuracy, etc.). Are there any that art partiularly useful when in the field for existing buildings? 

Many thanks,

JD

For a number of years a colleague and I have been teaching a course about sustainability and water in architecture at the University of Pennsylvania's architectural school (PennDesign).  This year we're hoping to bring a few new opinions to the table for at the same time as we broaden the discussion.  Because the class will be virtual again... Read more

Hi all,

Just like many of you, our firm is dedicated to increasing representation in the professions and through its relationship to the AIA Large Firm Round Table was able to access a National Organization of Minority Architects Fellow this summer. We’re loving our work with Himesh thus far, but it’s unclear whether we have the workload... Read more

Hello SD Leaders!

Two weeks ago a group of us gathered for the Winter 2020 Sustainable Design Leaders Summit. Those of us from BuildingGreen that were on site, greatly appreciated everyone's time and energy. It's always a pleasure to work along side you all!

Here is the summit report!

Reminder: We are giving a priority look... Read more

Has anyone vetted through all the Epoxy and Resin-based flooring systems to see which flooring application is "healthier"?

Below is a preapproved list from our local health department:
• Tera Lite • Stonhard Stonclad, Stonclad Ut, Stonshield Hri • Sunbelt 110 • Everlast • Westcoat Epoxy Mortar, Slurry, Or Double Broadcast • Dex-O-... Read more

I received the following email from Naajia at Southface.  I'll be out of town until November 8, but I'll see if there's time for me to address at least the second part before I leave:

A question regarding the BIT-User Forum was brought to my attention by a participant. Apparently when you are posting a question and you pick your location... Read more

Pint-flush and non-water urinals can save tens of thousands of gallons of potable water per year. A single non-water-using urinal can save more than 10,000 gallons of water per year compared with the U.S. EPA standard of 1.0 gallon per flush (gpf).

When older 3.0 gpf urinals are replaced, the savings can be as great as 50,000 gallons... Read more

Welcome to the quiz portion of Rebuilding for Resilience in the Face of Natural Disasters!

IMPORTANT: This quiz covers three related articles within this topic. 

Learning Objectives
Upon completing this course, participants will be able to:


Hello, 

All my experience with sustainability has been at the building-level. We are currently being asked within an RFP to list our firm's ESG score and certifying organization. Our firm is about 300-employees and is owned soley by the employees. 

When do A/E firms obtain an ESG score?

is it based on company size? or... Read more

HI All,

Really hoping to get some insight from all you wonderful people on how the Sustainability teams are set-up in your construction companies. As mentioned in my introduction post, I am the first ever Sustainability Engineer hired by my company.....until now all the work was handled by project teams. Which worked for them in the... Read more