Ali Flynn and Alejandra Arce Gomez are planning a breakout meeting for the Waste Managment Group for all interested. 

Please fill out the doodle poll below so that we can find a good time:

https://doodle.com/poll/qxd4zxrw9xzrxwc6

Ali and Alejandra have drafted an updated version of the Commitment for Waste (attached) after... Read more

We're looking to add a green wall to our existing offices in NYC. Can anyone please share any good product/vendor recommendations?

We were hoping to use Naava walls, but they seem to have retracted into Europe, as far as I can tell.

Hi all!

I'm working on my first energy positive / passive house multifamily building and trying to figure out the trash/recycling chute. I am curious what solutions you have employed to make the trash chute air tight? We have excluded the whole chute from the envelope. Do you use airtight doors (and which ones?) at each floor trash/... Read more

Hey All!

One of the initiatives from our first meeting in Chicago was to gather and develop resources related to plug and process loads in buildings which will help us all with: energy modeling, equipment sizing and power distribution.  We had our first call this morning and are rolling.  Aspirations are that this could turn into a... Read more

Welcome to the quiz portion of How to Succeed with the Living Building Challenge: 12 Teams Share Tips.

Learning Objectives
Upon completing this course, participants will be able to:


1. Prepare for LBC imperatives.
2. Structure an LBC process around absolute goals, with proactive leadership and follow-through... Read more

Hello, what acceptable levels of air quality are you using to evaluate natural ventilation strategies for your projects?  In our Living Building we only open windows when PM10, PM2.5, etc. are within LBC and WELL limits.  In a seasonally smoggy urban environment, this limits how often we can utilize natural ventilation even if the outside... Read more

Hi All - I have a 3 bdroom close walking distance to Greenbuild venue - but I don't need it.

Last call before I cancel it - if anyone wants it - I can transfer!

Just shoot me an email directly to bb@sustainable-performance.org

Thanks and see you there!

Are FSC glulams available? By many manufacturers? Which ones?

This summit was pre-approved for 3.5 AIA LUs and 3.5 GBCI CE hours.

Please complete the survey questions to confirm your attendance and receive your CEUs.

By providing your credential numbers in your profile, you will enable us to automatically report these CEUs to the organization. Please check your profile to be sure your... Read more

Hi All, 

As I mentioned at the summit, I'd like to start a discussion thread on knowledge management, company Intranets, and limiting Information overload as it pertains to sustainability. Those who are interested can share thoughts and experiences via this thread and maybe we'll set up an occasional phone call.  

Here are the... Read more

Hey all,

Question for those of you who do in-house daylight analysis about modeling translucent glazing.

We use ClimateStudio for our modeling. It has plenty of material options for clear glazing but nothing for translucent glazing, and we are trying to understand the impacts of a translucent interlayer at some skylights. We can... Read more

Hello SDL-ers - 

The SDL Climate-Smart Wood Group hosts a monthly online forum for builders all over North America who care about wood - and if that sounds like you, you're invited! As builders, we want to advocate for the conscientious use of wood as part of a holistic commitment to climate justice and resilience. We have been meeting... Read more

Does anyone know of a good summary of state and local energy code adoption for new building and ordinances for existing buildings? I know of this energycodes.gov site, but it feels somewhat misleading when you dig into it. For example, in CO, it suggests there is no min code, but there is, and it doesn’t show the extent to which local govs are... Read more

Greetings, Green Gurus!  As many of you know, I teach a course at the University of Pennsylvania's Graduate School of Architecture, and one of my former students has just graduated from their and MS in Design - Environmental Building Design program.  She is looking for employment at a firm that has a focus on sustainability.  Unfortunately we... Read more

Hi All,

I wanted to share an exciting opportinity with this esteemed group: Placetailor is seeking out a Mechanical Engineer to add to their growing team. They are located in Boston, MA and focus on Passive House, Low-energy Design, and they have for two years running meet the tenets of the AIA 2030 Commitment! This is an exciting place... Read more