Hi all, we are embarking on an effort to standardize our LCA process in order to maintain a firmwide database of embodied carbon intensity from which we can create internal baselines and targets. I was wondering how other offices are setting boundaries for their LCA efforts. Below is our starting point. Most LCA will be conducted using Tally.... Read more

Welcome to the quiz portion of Solar Thermal Hot Water, Heating, and Cooling.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain active and passive; direct and indirect; and low-, medium-, and high-temperature solar thermal systems.
2. Distinguish between the three most... Read more

Has anyone had a Contractor track GHG emissions during construction? If so, any advice on how to include that in the project specifications?

Thanks!

Yarden

I have been watching LEED Zero for a while, and have appreciated certain things, but one thing I think is an absolute disaster is their allowance of mainline RECs for claiming Zero Energy and Zero Carbon performance.  I just asked this question on the LEED Zero webinar, and the panelist basically said, "it's part of LEED Zero, therefore it is... Read more

Metal windows are used in commercial building because of their durability, low maintenance, and ability to handle wind loads.

BuildingGreen-Approved Windows

Metal windows must achieve an NFRC-certified unit U-factor of 0.20 or lower to be approved by BuildingGreen.

Manufacturers also must demonstrate that their highest-... Read more

Has anyone used Insight for Revit to document the LEED Daylight Credit If so, would you recommend it?

Thanks,

_Ilana

Hi everyone,

Happy new year!

The FIRST First Friday Fika* of 2024 is happening this Friday, January 5th from 11am to 12pm ET, hosted by Candace Pearson.

Here is the registration link for the Fikas, or if you've registered previously, you can use the same link for this week.

We look forward to seeing you Friday!

Does adding solar panels reduce a building's EUI?

Existing operational use of a building is 80 kBtu/sf/year. When we add solar, it will change the source of energy but does not change the usage.

My understanding is that the EUI does not change, but it would be good to hear from others.

It's energy consumption at the point... Read more

My firm is mobilizing for a year of carbon awareness and reduction that goes beyond the energy consumption of our designs. We are looking to hire a full time person to take on LCA tracking for our current projects. Ideally it is a climate crisis super-hero of sorts who could also look at our design process and help develop multi-faceted... Read more

Hi all,

Later today, we will be delivering the BITuser development site ready for content input. Andrea has created instructions to help get you started.

We would like to set up a few editor profiles for you. Could you let us know who should have a profile for content management? We need first and last name and an email.

... Read more

Happy Friday, SDL!

We're running a Tally WBLCA for an environmental education center, which has a very small floor area but a fairly robust concrete/steel structure. Still, I was surprised to find an intensity of over 1,000 kgCO2/m2 for the building.

This is way higher than the general benchmarks I've found in the CLF's database,... Read more

Hi all - at the suggestion of Nadav and some of the Sustainable MEP Leaders, I'm reposting a thread I started a couple days ago in the SMEP forum.

In response to increasingly aggressive (and effective) targeting of building owners (particularly schools), a group of researchers have put their support behind a letter warning against the... Read more

Welcome to the quiz portion of EPDs Are the Future of the Building Industry, Whether You Like It or Not.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain how environmental product declarations (EPDs) are made, what they tell you, and how they're best used.
2. Describe... Read more