In the Passive House session at the Winter Summit, I spoke about a Massachusetts DOER report that found that meeting the new energy code in MA (passive house or better in most cases) is cheaper for some building types than traditional construction. Some of you asked to see the report. It was a power point show. On page 34 of this slide deck... Read more

Hello lovely Green Gurus. Hope you all are well. I am wondering if anyone has installed an indoor sports floor that performed well and is low-emitting. This is for a multi-purpose gymnasium at a community center. Any chance?  Thanks All!

OSB subflooring typically contains formaldehyde, and wood may not be sustainably sourced.

BuildingGreen-Approved Subflooring

Products approved by BuildingGreen contain no added formaldehyde or are available with FSC-certified content.

Magnesium oxide panels, which are particularly insect and moisture resistant, are also... Read more

Welcome to the quiz portion of Video: Energy Reporting in LEED with MPR6.

Learning Objectives
Upon completing this course, participants will be able to:


1. Define the role of MPRs in achieving LEED certification
2. Describe MPR6 and the pathways for achievement
3. Answer MPR6 Frequently Asked Questions... Read more

I am looking for anyone that specializes in this area, see the principles below.

http://universaldesign.ie/What-is-Universal-Design/

We have looked at HOK's Neurodiveristy document which is great. Are there other resources like this, or other designers/consultants you have worked with?

TIA

Kristen

Kristen... Read more

Join us for the Peer Networks-exclusive version of this Greenbuild presentation!

Register HERE.

A New Standard in Facade Design
November 30th, 2020
1pm - 2pm ET (10am - 11am PT)

Description and Presenters: Current façade design focuses more on operating carbon (or energy), even when embodied carbon is accounted... Read more

Posting at the request of Sara Bayer of Magnusson Architecture and Planning, who will soon join this group:

"In our quest to achieve Passive House EUI levels in all of our multifamily projects in a healthy manner, we are encountering pushback on the one item that is not really code min just yet (in NYC) and adds real cost:  ERV’s.  Our... Read more

As we begin to look into Scope 3 emissions reduction strategies, it's important to understand ways to reduce tranportation emissions to project sites. Is anyone aware of best practices or programs for contractor carpooling to jobsites? I know many of my colleagues travel to work together in one vehicle because of parking limitations, however,... Read more

We are looking at installing an aerobic biodigester in a commercial kitchen for an office client that is VERY concerned about zero waste.  Basically, this system takes food waste, treats it with micro-organisms to remove organic matter, and turns it into water of high enough quality to go straight to the sewer.  The manufacturer we are looking... Read more

Hi Small Firm Sustainable Design Leaders!

Our call today at 1pm Eastern will focus on the ways in which your firm is impacted differently than larger firms on the variety of topics and issues that are reflected in the 2020 SD Leaders Winter Summit REPORT. Take a look at this report and especially at slides 14-33. Bring your observations... Read more

We are excited to share the REPORT from the 2019 Small Firm SDL Summit held in Las Vegas on June 5th. Take a look and use this forum to post questions and comments that will allow us to engage our new members as we continue the valuable conversations begun at the Summit. As you will read in the introduction, we know that collectively small... Read more

We have all these resources out here in the ether but it’s so hard to pull them into one spot! I was asked, last minute to join a client call today to help convince both the client (affordable housing developer) and the mechanical engineers to "stick with" a commitment to 100% electric design that was publicly stated when the competition was... Read more

They do, seriously.  They are fine people with tons of information, and without them, all of us Architects would be, well, out of luck.

So, we first want to say THANK YOU to all of our contractor friends who took part in our Contractor Coffee Talk on Tuesday. THAT WAS AWESOME!

We learned things like:

Hi everyone,

Thanks so much to those of you who presented at this years AIA Show & Tell, and thanks again to ZGF for hosting! Here are the slides for some of the presentations. Please do not share the slides outside of the networks unless they are marked "PUBLIC." Hope you enjoy!

Hi: Great to see so many of you at AIA COTE Top Ten last week.  I'm forwarding the message below for those of you who know Marsha Maytum and can contribute to this important effort. Deadline is next Friday June 23rd!Thanks.

Mary Ann

Hello, friends,

During A'23, Je’Nen and I discussed our desire to send Marsha photos we have... Read more