HI All,

I am curious if others are using THERM in-house for your envelope design?

We usually use our building envelope/curtain wall consultants (Boston - so mostly RWDI and Heintjes) but our teams are finding that they need the information faster than our consultants can provide, they are backlogged, or we have some curtain wall... Read more

Hello SD Leaders!

Two weeks ago a group of us gathered for the Winter 2020 Sustainable Design Leaders Summit. Those of us from BuildingGreen that were on site, greatly appreciated everyone's time and energy. It's always a pleasure to work along side you all!

Here is the summit report!

Reminder: We are giving a priority look... Read more

Greetings!

Ayers Saint Gross is in search of a Sustainable Design Coordinator to join our team. This person is anticipated to sit in any one of our offices - Baltimore; Washington, DC; Tempe, Arizona; or Austin, Texas. Fit and skillset are more important than geography. The position is anticipated as full-time, but if the right candidate... Read more

Interior doors may be a source of indoor emissions, and wood can be unsustainably sourced.

BuildingGreen-Approved Doors

BuildingGreen approves interior doors made from FSC-certified wood or reclaimed wood as well as composite doors with environmental features like:

Greetings AEC Sustainability Leaders -

This is an update on where we stand with the BBB letter. In addition to posting this to the AEC SDL (Green Gurus) Forum, we are sending the same message to all current signatories by email to make sure everyone is notified. Apologies for putting two items in your inboxes!

First, please read... Read more

Older buildings—especially those from the 1950s, ’60s, and ’70s—need our help. Many leave something to be desired in terms of aesthetics and comfort. But the truth is that they are part of the urban and suburban fabric now, and they aren’t going anywhere. As tempting as it might seem to tear them all down and replace them with high-performance... Read more

Hello friends, Posting this to help out a friend that you all know!

(please reply directly to Kira at her email below) Tx

Dear Gurus, 

I am curating/hosting a panel at CarbonPositive RESET:

DESIGNED FOR CLIMATE: A New Construction Showcase

North & South America: September 8, 2020 | 4:45-5:25pm (PST)

Greg Calnago

Hi - Posting on behalf of Pete Munoz at Biohabitats

Biohabitats is hiring a proposal coordinator in Portland. Please spread the word. Thanks!

PROPOSAL COORDINATOR

Cascadia Bioregion Portland, Oregon is the preferred location, but will consider Denver, Colorado or  Santa Fe, New Mexico  

Years of Experience: 5+ years... Read more

Auto-quiz used for CEUs for attendees of the 2023 SCL Wintger Summit.

Hi Sages,

We had a great conversation in yesterday's Sages meeting. We took the long list of ideas that we brainstormed last month and in our March poll when thinking about what we could/should focus on as a group and we did some refining and prioritizing using dot-voting in Miro (once we got the voting technology figured out!). Notes... Read more

All--

I haven't been part of this group in a while, but I'm excited to have rejoined recently. Some of you know that I joined HMC last year as Chief Impact Officer. I oversee design, sustainability, research, and communications for the firm, which has 300 people in 6 offices in California. We were founded in 1940 with a mission to serve... Read more

Folks,

In case any of you enjoy the Phoenix weather, I wanted you to be sure to know that our company, Sundt, which is headquartered here is looking for a sustainability director to lead up our efforts. This comes after two years of work and hiring a consultant (Brightworks out of California) to help us prepare and take the next steps. I... Read more

We have a project looking to use Radiant Floors to help with space heating.  I don't have experience with this so I'm looking for any insights.  Pros / Cons? 

This project is a non-profit and is needing to reach LEED Silver minimum.  This is in Washington State.  Thank you for your help.

For those of you that attended Greenbuild this year you may have heard about the Legacy project taken on by the USGBCMA Chapter. The winning project was The Green Building Tech Club at Madison Park Technical Vocational High School. The USGBCMA Chapter recently reached out to me and asked if Structure Tone would take on an intern this summer,... Read more

Welcome to the quiz portion of What Makes a Product Green?.

Learning Objectives
Upon completing this course, participants will be able to:


1. List and describe at least three attributes that address each of the following categories: "efficient use of materials"; "responsible sourcing"; "energy and water... Read more

If your HVAC designers are addicted to the crack that is Trace 700, and knowing that Trane is giving up on that product in the coming year, what loads program are you weaning* them onto?

Asking for a friend:  Have any of you had success in using the Revit plug-in for loads?

*When told that they should use IESVE for loads, our HVAC... Read more

Hello all,

Does anybody know of a substitute for Ecotect's solar tool? I use it to very quickly test shade options and I love how I can easily test horizontal and vertical elements, tilting and rotating them. I can have a window with the façade on one side and the sun path with the shadow mask on the other side. It is easy to use and... Read more