We have a project that is looking for plaster/stucco/textured wall products that are sustainable, or “more sustainable.”

I know these products exist, but I haven’t had to spec or work with any, so I’m reaching out.

The project is in MA, so I'm also soliciting recommendations for products and/or companies who are experienced using... Read more

Hello everyone, Happy New Year! 

I wanted to send a quick note that we have an awesome group registered for the Sustainable Design Leaders Winter Summit 2020 and we still have a few open seats! This is taking place Jan. 29th - 31st, 2020 at The Lodge, Gulf Shores, AL with an exciting Pre-Summit Workshop happening that Wednesday. If you... Read more

Hi All,

The SMEPL's Embodied Carbon committee has been hard at work developing a letter that calls for MEP equipment vendors to increase material transparency in their products.  As a way of contacting the most widely-used vendors first, we're asking each of you to enter your "Top 3" specified vendors for each of the products listed in... Read more

Hi All,

Has anyone dug into ASHRAE 2016 as part of the new v4.1 requirements or as codes start to adopt it? I recently presented on this and thought I should check my math to make sure I'm understanding and communicating this correctly.

My understanding is that there is a new reference baseline, that is essentially the ASHRAE 2004... Read more

Hi everyone,

During the "Integrating Social Sustainability" session at the Winter Summit, an idea was hatched to form a working group dedicated to understanding how equity services can benefit a client's pro forma. Our first step (of course) is to identify the range of services captured under "equity services" and we'd love to speak with... Read more

Welcome to the quiz portion of "Spec This, Not That: Avoiding Toxic Chemicals in Commercial Building Projects"!

Learning Objectives
Upon completing this course, participants will be able to:


Identify 33 common hazards found in building products, along with their health and environmental impacts and where they might be found.... Read more

Welcome to the quiz portion of The Product Transparency Movement: Peeking Behind the Corporate Veil.

Learning Objectives
Upon completing this course, participants will be able to:


 

1. Describe an EPD, naming at least six characteristics that it attempts to quantify.
2. Explain what the HPD Open Standard... Read more

A site license allows your entire organization to access and share the guide, and to keep a copy in your library.  

Avoiding Toxic Chemicals in Commercial Building Projects

We’re excited to be releasing the 2020 edition of Spec This, Not That. 

... Read more

Hello Everyone!

Please mark your calendars and stay tuned for more information regarding an All Peer Networks 2020 Summit Season Closing August 10th, 3-5pm ET (Noon-2pm PT).

Register HERE to get it on your calendar! The staff at BuildingGreen are looking forward to planning a fun and engaging cross-network event focused on this... Read more

Change comment notification preferences Change MailChimp preferences

Happy New Year Sustainability Leaders!

In case you did not see the Peer Networks Happenings email for January yet, here is a quick reminder: Happening this week, you're invited to join BuildingGreen's Top 10 Green Building Products for 2022 live webinar Thurs. Jan. 6 2022, 2pm ET (11am PT).

Register Here to reserve your seat!... Read more

Carpet cushion may emit VOCs or contain halogenated flame retardants that can slough off in dust.

BuildingGreen-Approved Carpet Cushions

 

BuildingGreen approves carpet backing made from natural materials as well as synthetic commercial products that meet the Carpet and Rug  Institute’s Green Label standards.

... Read more

Hi folks,

I'm looking into lower-carbon pipe options for HVAC and plumbing. The MEP 2040 has slides from a Buro Happold study in 2020 showing PEX to be much lower in embodied carbon than copper, which is unsurprising. CPVC is also a lower-carbon option.

But PVC has its issues and neither PVC nor PEX are recyclable (especially if... Read more

Hey gang,

We're working on a project that's currently designed as mass timber. We're up against some cost control efforts (of course) and the CM/Client is asking about changing some of the building to steel or green steel. We set out with a goal on the project that within the core and shell, Module A GWP emissions will be net zero.... Read more

The ReUse Map created through the Material Flows Working Group is live and got some great traction at Greenbuild (Thank you Nadav and Barbara!).

To keep the map relevant and updated, we'll be looking at how to fund the maintenance of the map, the best ways to get the word out and looking at writing a white paper. If you want to be part... Read more

Hi, all. We missed you at the standing check in today. We have a couple of questions for the BG team:

1. What is the timing criteria you need for Best Practice content? We need to back into a deadline on submissions and believe your critical path timing will help define ours.

2. Can you elaborate on what LEED User/BG content may... Read more