Good evening,

I am looking for suggestions to replace"wood" siding at the 25-year-old Lyle Center for Regenerative Studies and as always there is no solution that does it all. There seem to be three main options: wood, composition siding, or fiber cement siding. I am looking for something with low embodied carbon, little maintenance,... Read more

Kristen Fritsch, in the thread about ipe wood, asked about resources comparing the carbon footprint of transporting building materials vs the transport mode.  There are people who spend their lives on this topic that I won't presume to speak for, but I'll share a few observations:

Even though freight transport is something like 7% of... Read more

All,

The Idaho Division of Occupational and Professional Licenses (DOPL) has undertaken the Zero-Based-Rulemaking process this year to eliminate all requirements that are not specifically life-safety related.  As such, they have proposed removing the International Energy Conservation Code (IECC) 2018 provisions regarding commissioning... Read more

Have any of you heard of anyone ever using phase change material (PCM) "movable partitions" as a resiliency strategy to mitigate indoor overheating during a heat wave in passive buildings? You'd keep them stored in a basement or cool room, and deploy them into habitable spaces during the heat wave to keep the space cooler than the exterior... Read more

Welcome to the quiz portion of Choosing Insulation: Health and Environmental Considerations – Unit 1.

Learning Objectives
Upon completing this course, participants will be able to:


 

1. Discuss how insulation works.
2. Summarize how insulation performance is measured and reported.
3. Recount the wide... Read more

Does having a rating system change the conversation? How well defined are the metrics for resilience? How to measure success? Does the RELi Rating System provide a good way to define resilience. How many are using the system and have they noticed a growing level of understanding because there is a rating system? How to talk to clients about it?... Read more

Friends,

We put a lot of effort into air tightness design, detailing, and construction administration, often including 6-sided mockup and parital or whole-building blower-door testing.  For commercial buildings, these tests measure air leakage in cfm/sf at 1.57 psf (75pa).  

I came across this research paper several years ago, but... Read more

Hi everyone, 

We’re so excited to announce that registration for the first-ever “Summit for the Sages” is live! Register here and save your seat to join BuildingGreen, your Sages peers, and members of all three other networks in Omaha this Summer.

If you are in Sages and SDL and want to attend both summits, please check the “SDL... Read more

Hi folks,

Oregon’s ZERO Coalition is looking for responses to the question below on local policy for electrification, and I thought tapping this group would be helpful.

Are you aware of any local governments outside of Oregon that are promoting or enforcing electrification?

Berkley, CA is one example that as of Jan 1, 2020... Read more

Hi, all! We've got amazing editorial plans for our December and January coverage, including Brent's rollout of the Top 10 Green Buiding Products for 2024 and a much-needed update to Wood: What's Good? 

Here's the trouble: we have waaaay too many good ideas about what else to cover. And I super suck at mind reading. So Nadav thought maybe... Read more

Sustainability leadership has requested that you take this quiz to help assess sustainability literacy across the firm. Your own results will be presented to you at the end of the quiz but will not be shared with anyone else. Only aggregated, anonymized results will be available to others.

Please don’t do research to inform your answers... Read more

The current Stantec/BuildingGreen featured topic is Resilient Design. Read on to learn the essentials, and then dive deep to earn CEUS.

Also see the Material Health featured topic, and also a survey of topics trending in Stantec’s regions.... Read more

Dear all,

For a specific existing building application, we are looking for a half inch insulating glazing unit, preferably with low-e coating. Based on my research, 5/8" seems to be doable (1/8" glass + 3/8" air gap + 1/8" glass) but I'm yet to find a viable 1/2" solution. Have you come across any on your projects? Thanks for your... Read more

Hi All,

At the SCL Summit in November 2019, the Carbon Group discussed meeting in Q1 2019 to craft an action plan for measuring and voluntarily disclosing carbon emissions from our operations.   To kickoff that effort, we will be having an online meeting. 

If your company is already disclosing greenhouse emissions or if that's... Read more

Has anyone come across any (embodied) carbon emissions calculator for water?  Perhaps per region/state?  

Thanks in advance!

Welcome to the quiz portion of Avoiding the Global Warming Impact of Insulation.

Learning Objectives
Upon completing this course, participants will be able to:


 

1. Define “embodied global warming potential” and “lifetime global warming potential” as they relate to insulation materials.
2. Describe why some... Read more