For those who are visiting Chicago, Kira Gould has asked me to spread the word about a casual AIA COTE meet-up. Stop by, meet friends and have a beer.

If you will be in Chicago on November 15, please consider joining a casual meet-up of COTE leaders/members/friends (no fee to join; it's pay-your-own-way at the pub):  

AIA COTE... Read more

Hi All,

Has anyone dug into ASHRAE 2016 as part of the new v4.1 requirements or as codes start to adopt it? I recently presented on this and thought I should check my math to make sure I'm understanding and communicating this correctly.

My understanding is that there is a new reference baseline, that is essentially the ASHRAE 2004... Read more

Hi all,

We have a newly constructed, core/shell project having some hot water issues in the core restrooms.

There is a 0.35 Toto lav installed throughout. The hot water heaters are adjacent on each floor, located in the janitor closets. We did the math, and there could be a gallon of water standing and cooling in the pipe between... Read more

Hi everyone,

Have your projects explored, pursued, or successfully achieved the domestic content bonus for PV systems within the Inflation Reduction Act (IRA) Investment Tax Credit? I have a project that is considering adding the IRA domestic content requirements and we are trying to understand the nuances and potential challenges (cost... Read more

Good morning, All,

Just a bit of news this morning.  My family and I are moving back out west!  I am continuing in my current role with EwingCole, but will be doing so from Portland, Oregon.  Although North Carolina has a been a wonderful place for us for the past 13 years, it is time to be close to family in the northwest and southwest... Read more

We have an MEP engineer that is calculating peak loads at about 6 times passive house levels on a large commercial building that is at or near passive house levels of insulation and air infiltration. We suspect one reason is that he is figuring a 50% efficiency level for the ERV. We are showing him ERV systems with 80-90% efficiency, but they... Read more

Hi Everyone.  Hope you and your families are all healthy and safe.

We are starting to figure out how we are going to implement the Contractors Commitment at my company, and we're using the opportunity to simultaneously set corporate wide and jobsite metrics and goals for sustainability tracking.

Each year we issue a sustainability... Read more

I am very interested to understand the deployment of LED temp jobsite lighting on a national level.  I think this all goes back to the low emitting jobsite.

1. Does your firm utilize temp jobsite lighting on your projects?  

2. Is this every project or a percentage of projects?

3. In your state or area is it prevalent, one... Read more

Welcome to the quiz portion of Boost Happiness and Save Energy with Adaptive Thermal Comfort!

Learning Objectives
Upon completing this course, participants will be able to:


Define “adaptive thermal comfort” and explain how it can contribute to occupant health and satisfaction.

Compare the adaptive comfort model... Read more

Great meeting everyone and very excited to work with you all.  Reminder about Tuesday night's homework assignment to support Sachin's efforts to upgrade the quality of our AE pipeline:  tell us why you got into this business.

While I was an undergraduate engineering physics major*, I had a partime job at a farm implement manufacturing... Read more

Hello all,

This month's SCDL call was full of great discussion! We decided this month that we are feeling good about where we are for the Task Force Agreement on defining social sustainabiltiy in our work. The aim is to work with this agreement for a while and see if it holds up as a process framework. There was also interest to invite... Read more

Hi Everyone - I hope this isn't a repeat topic. We are starting to get familiar with TallyCAT at SAR+ and have a few people testing our projects in it. Is anyone willing to help us troubleshoot or share lessons learned? We're running into a few errors and wonder if our Revit models and workflow are the issue, or if we need to be doing something... Read more

Hey Peer Network! Curious, if we can crowd-source a solution here for the pervious pavers at our Omaha office (climate zone 5A). Apparently over the years we've tried to add different kinds of fill here (gravel) but it keeps... disappearing. Any recommendations with either a replacement product or fill item? 

What better way to follow up the magic of a live presentation from Peter Yost than with 30 free days of BuildingGreen Premium?

Welcome to this practice session for the LEED AP v4 exam, and good luck!

All the exam questions and explanations that follow were authored by Alex Spilger, LEED AP BD+C of GreenStep Education, and are provided in this BuildingGreen "exam simulator" through a special partnership with GreenStep and with our friends at the Poplar Network.... Read more