We are having trouble sourcing a LEED compliant wallcovering adhesive. We specified Roman Pro-880 which is low VOC but doesn't have sufficient back up for TVOCs. Have you had success with other products?

Hi Everyone - I hope this isn't a repeat topic. We are starting to get familiar with TallyCAT at SAR+ and have a few people testing our projects in it. Is anyone willing to help us troubleshoot or share lessons learned? We're running into a few errors and wonder if our Revit models and workflow are the issue, or if we need to be doing something... Read more

Hello SDL!

Has anyone set "Ecosystem Benefits/Service" targets for an individual project or for all their projects? I was previously against the idea of even measuring ecosystem benefits but I've had my mind changed in recent months!

Currently we want to set a target for every project to: "Improve ecosystem benefits on every site... Read more

Here's the Core Purpose for this group that came out of the Inaugural Summit.

We're off and running!

Welcome to the quiz portion of Deep Dive into the Integrative Process with Marcus Sheffer (recorded webinar)

Learning Objectives
Upon completing this course, participants will be able to:


What thoughts do you have? What have others said that you feel we want to capture?

The Vision Vacuum: What’s driving environmental and social progress in architecture today? What should be driving it, and where should we be going?

Welcome to the quiz portion of Five Reasons to Be Optimistic About Solar Energy!

Learning Objectives
Upon completing this course, participants will be able to:


Describe three ways how PV decreases environmental impact while increasing sustainability and health measures for communities.

Discuss PV life-cycle... Read more

On a large sports project, we worked with the structural engineer to spec low carbon / high SCM concrete mixes. Much of the floor area will be sealed and polished concrete, and a concrete sub is pushing back on the SCMs saying they should not be above 20% (with a preference for 0%) for the polish to finish properly, per the manufacturer. Anyone... Read more

I'm still basking in the glow of yet another great Summit. I hope others who were there are feeling the same.

Here are the flip-chart pages from the many round-table conversations. Five-minute presentations to come shortly, followed by the Summit Report.

Feel free to use this thread to share other resources and thoughts.

... Read more

Hello Green Gurus,

Here is the information for your October Peer Networks Webinar, Advocating for Electrification. We hope you will join us!

Register HERE.

Advocating for Electrification
October 26th, 2020
1pm - 2pm ET (10am - 11am PT)

Description
Hear from leaders in the AEC and policy community on... Read more

Asking for a colleague:

"Have you ever had a large number of fire retardant tarps used to temporarily enclose a building during construction? Do you know of any solutions for recycling/reusing them or another product that doesn't use toxic fire-retardants that meets the performance criteria?"

I think we've all seen poly or fabric... Read more

Hey all - sorry I won't be able to join our call today. I had a client request an emergency meeting today (boo) because corporate mandated that they eliminate fossil fuel use from all their buildings (yay!) by 2025 and they've got a project underway that needs to pivot quickly. 

Had I been able to join, I wanted to share this in case... Read more

Faucets with high flow rates waste water—not to mention the energy used to treat and deliver it to our buildings—and the additional water stresses our wastewater treatment systems.

Some of you are aware of my ongoing saga of off-site renewable energy and a LEED certification we are pursuing. The short version is that there is a new-construction corporate headquarters office building (Building #2 on the attached graphic). This building is pursuing LEED certification. 

The company also just installed a 1 MW... Read more

Are there any metrics for % increase for building PH vs conventional?  These questions are always really hard- especially when there are none to compare to in area.

Dear Colleagues:

If you are short on time, here is the executive summary:

Time to make healthy trouble and sign a petition today to the WHO to urge them to recommend the implementation of best practice healthy air guidelines in light of the recent studies showing a direct link between the spread of COVID-19 through aerosol... Read more