Hi folks,

It was fun going back over all the great conversations we had and pulling them together in this report. Please feel free to share it with anyone--no constraints on that!

Also, we'll have a webinar next Friday based on this report-- March 8 at 2pm eastern:

I'll show the report and share key takeaways from the 12th... Read more

Does anyone have a "healthy material" exterior bleacher benchtop (beyond natural wood or metal) recommendation for a public high school track and field? 

How do we discern between fiberglass, recycled plastic or HPDE?  Is there a rule of thumb on how to advocate for specifying a "not as bad" material? 

The project is in a coastal... Read more

Hey all,

Thanks to everyone who joined today's peer network webinar - it was great to share what our working group has been developing in the last year. This group gathered to work through a series of decision-making trees to publish some kind of relatively repeatable guidance for how to advance this conversation with a variety of owners... Read more

Hi all,

We know preparations for Greenbuild are well underway for many of you. We also know that there will be many things competing for your time while you're there. Here's one more to consider! We don't have all the details solidified yet, but wanted you to know sooner rather than later for planning purposes.

We hope you’ll... Read more

We have all these resources out here in the ether but it’s so hard to pull them into one spot! I was asked, last minute to join a client call today to help convince both the client (affordable housing developer) and the mechanical engineers to "stick with" a commitment to 100% electric design that was publicly stated when the competition was... Read more

Hello,

We have a mass timber purpose-built rental project specifying flooring at the moment and are trying to find a healthy flooring option while managing acoustics with CLT floorslabs. We don't typically spec vinyl flooring due to the health concerns around PVC, but the project is budget-conscious, and our flooring supplier is... Read more

Hi,

Has anyone used a sustainable product that complies with the EQc Low-Emitting Materials requirement that is a general construction adhesive similar to Liquid Nails? I've checked the Mindful Materials website and can't find anything. I found Red Devil General Prupose Construction Adhesive on UL Spot, but have never used it before. Any... Read more

Hi: Great to see so many of you at AIA COTE Top Ten last week.  I'm forwarding the message below for those of you who know Marsha Maytum and can contribute to this important effort. Deadline is next Friday June 23rd!Thanks.

Mary Ann

Hello, friends,

During A'23, Je’Nen and I discussed our desire to send Marsha photos we have... Read more

Hello,

The Baltimore office for Hord Coplan Macht is looking to hire a Sustainability Coordinator.  Please find the specifics here https://workforcenow.adp.com/jobs/apply/posting.html?client=hcm2&jobId=4... or attached and pass along if you know of someone who may be a good fit.

Thank you,

Ara Massey 

All,

For those who tuned into the Green Gurus presentation earlier this week, there was a question that came up during my presentation on NZE/NZC programs regarding whether ILFI allows the offsite renewable energy exception for LBC and Energy Petal projects (as opposed to NZE or NZC). I just double checked with them and it turns out they... Read more

We are embarking on our first CLT projects (our at least we hope that they go that way). Would anyone with experience be willing to share some thoughts from the architect's perspective on things to consider, lessons learned, etc?

As with most office furniture, systems furniture can be made from unsustainable materials and use adhesives and finishes that emit formaldehyde or other hazardous compounds.

BuildingGreen-Approved Furniture

BuildingGreen approves furnishings that:

Not to distract from Tanya's post, but we too have a new opening for a Sustainability Specialist in our Dallas office. If you know anyone...https://careers-pagethink.icims.com/jobs/1254/sustainability-specialist/job

Dear all,

For a specific existing building application, we are looking for a half inch insulating glazing unit, preferably with low-e coating. Based on my research, 5/8" seems to be doable (1/8" glass + 3/8" air gap + 1/8" glass) but I'm yet to find a viable 1/2" solution. Have you come across any on your projects? Thanks for your... Read more