Welcome to the quiz portion of Choosing Windows: Looking Through the Options.

Learning Objectives
Upon completing this course, participants will be able to:


1. Choose a frame material based on its structural characteristics, thermal insulation, durability, maintenance requirements, cost, and effects on the... Read more

Thought this was worth sharing - Lance Davis, who manages the P100 program for GSA just posted to an email group i belong to that the GSA P100 program is to be updated in 2024.  In service to that, there is a "P100 Change Proposal Form" available for folks to make helpful suggestions.

They are asking for suggestions, i think we should... Read more

Hello AEC Sustainability Leaders (aka the Green Gurus)!

As we continue to promote and expand the use of mass timber on our projects, it is becoming increasingly important that we learn more about the spectrum of impacts that this material selection is having on the forests and communities from which we’re sourcing our wood fiber…both... Read more

Hello everyone,

Here's a reminder that our next monthly call will be taking place next Tuesday, September 10th at 2:00pm EST.

Please feel free to join us!

Join Zoom Meeting
https://zoom.us/j/661110941
Dial by your location
        +1 929 205 6099 US (New York)
        +1 669 900 6833 US (San Jose)... Read more

Hello friends in the construction group!

I am advising an owner on a huge redevelopment project and - we are of course looking at carbon/embodied carbon from a design perspective - but I remember hearing some of you talking about how you are addressing emissions during construction (including both recommendations related to specific... Read more

Hi all - I can't remember this topic being posted recently so here goes. With fossil fuel free finally being something our clients are increasingly wanting to know about, we are stuck on diesel generators. They have several advantages including: cost, inherent refillability from a truck, reliability, and are the market standard. In initial... Read more

Hey Sages, Just lobbing this over the transome - not sure if anyone else cares :) but this would be a great group to dig in if anyone IS interested.

 For the past few years, I've been working on melding two completely separate worlds - our world (with typical project delivery) and the world of Agile (not just software development process... Read more

This page contains our full User Agreement.

This Agreement sets forth the terms and conditions for your use of all webpages under both the BuildingGreen and LEEDuser names and domains, published by BuildingGreen, Inc. (collectively, the “Site”), including The BuildingGreen Report (formerly Environmental Building News) and BuildingGreen... Read more

So I was testing assigning a BIT Expert to a Best Practice and I am having trouble getting the profile image to appear.  

When I upload a profile picture, it appears on the standard profile page from "My Account" but when I navigate to the BIT Best Practice 01, the image does not show and it takes me to another profile page that does... Read more

This summit was pre-approved for 3.5 AIA LUs and 3.5 GBCI CE hours.

Please complete the survey questions to confirm your attendance and receive your CEUs.

By providing your credential numbers in your profile, you will enable us to automatically report these CEUs to the organization. Please check your profile to be sure your... Read more

Hi All ... I'm seeking suggestions for an ecologically minded landscape/site/civil consultant. Ideally with strong knowledge about Florida ecosystems. Thanks much for any sharing.

Rand Ekman

rekman@hksinc.com

Hi friends, 

Before i forget, here is the checklist I mentioned yesterday that got such a positive response in our office - again it came about after i was asked (for the Nth time) to write a sustainability description for a concept proposal/ RFP that I was not a part of and frankly didn't have a lot going for it. So it's framed as "you... Read more

Hi SDL!

Our CM recently offered up the possibility of substituting Pozzotive into our structural and paving concrete mix (www.pozzotive.com) on a large public building. Apparently it is on a level with the cost of standard cement.
We are eager to reduce the project's embodied carbon, and this seems almost too good to be true.

Is anyone aware of research or guidance that has looked at VOC’s from roofing products and ventilation intakes? I’ve done some searching, and focus is mainly on managing the construction process to reduce installer exposure. 

Thanks for any help!

Tate

Metal windows are used in commercial building because of their durability, low maintenance, and ability to handle wind loads.

BuildingGreen-Approved Windows

Metal windows must achieve an NFRC-certified unit U-factor of 0.20 or lower to be approved by BuildingGreen.

Manufacturers also must demonstrate that their highest-... Read more

Hello Green Gurus!

Quick introduction as this is my first time posting - Louis Koehl, AIA, CPHD, Director of Sustainable Design at Handel Architects, based in NY. I recently joined the SDL Forum and met some of you at the regional summit and Greenbuild.  I'm excited to continue to connect with such an influential group! 

My... Read more

Thank you for joining us for this webcast! Please complete the following survey to provide us with feedback and to record the information we need to report your CEUs.

By providing the information in this survey you will enable us to automatically report these CEUs to the appropriate organizations. Everyone attending and seeking CEUs must... Read more

Greetings!

Back again re: the work we're doing with City of Cambridge, in their great leadership efforts to develop EC policy/regs/incentives and reporting requirements.

Thanks to those who responded earlier about the effort it takes you to conduct WBLCA - now we're diving into it in more depth and wanting to get together a focus... Read more