Hey Everyone!

We are delighted to share a major milestone in our commitment to sustainable design. After two+ years of intensive research, refining, and internal application, NBBJ is thrilled to announce the external launch of ZeroGuide, an innovative tool for early-phase carbon estimation, now available to the entire AEC community!... Read more

Hi folks,

A press release about this just showed up--most of what they're including in their "Clean Construction Declaration" involves reducing embodied carbon in materials, but they're also calling out construction equipment:

"Procure and, when possible, use only zero emission construction machinery from 2025 and require zero... Read more

Practitioners interested in reducing the embodied carbon of buildings are likely now used to considering the impact of different materials, like mass timber or low-carbon concrete. Low-carbon construction, however, may be less familiar. 

Contractors are just... Read more

Hi all,

We are in the process of pursuing the Integrative Process for Health Promotion pilot credit on a project. Has anyone been through the process? What did you learn? How did it change/inform your design? Would you do it again?

Thanks!

Michelle

We have an environmentally-minded client who asked us to look into an alternative to the blue adhesive film that is typically used to seal uninstalled ducts for IAQ purposes. From a human health and waste perspective, they were hoping to find something that was both plastic-free and reusable. Has anyone tried out other options? I thought it was... Read more

We had so much fun at our Contractor coffee talk that I reached out to our MEP friends to see if they would set up something similar.  And they have agreed to host a talk on Thursday December 2, at 1-2pm EST.  They will talk about decarbonizing buildings, on a schedule that keeps us under the 1.5° C limit and will also address strategies for... Read more

Hi folks,

We're kicking off a new way for us to collaborate as a network: monthly web-based conference calls. The first one will be on Friday, Nov 15 at 1:00 eastern time. The topic will be "Sustainability and the Small Firm: Practices in Transition" -- which is the name of the proposal James has submitted (and gotten first-round... Read more

Hi Gurus,

LMN is embarking on a 17-part series to explore a more comprehensive carbon metric via summaries of various topics with lots of link. This dovetails with many other efforts in the industry and will reference all the best stuff that we are aware of...such as MEP 2040, SE 2050, CLF stuff, Epic tool, CARE tool, Arch 2030... Read more

Hi Friends, 

I'm working on an SOP for construction waste management for LBC core and LBC materials petal projects and wanted to get your input on the comingled facility requirements. According to the guidelines, any waste that goes to a comingled facility must be a facility that has an average diversion rate of 80% or higher as a... Read more

I thought some folks here might be interested in a webinar we have coming up this Thursday 12/6 on the topic of best practices for occupant comfort surveys. Although this webinar is part of our Roast launch series, it will be tool agnostic, with information that will be applicable to any occupant survey regardless of tools used. 

To... Read more

Evaporative coolers use far less electricity than conventional refrigerant-cycle air conditioners and they operate without the use of refrigerants, both features that make them attractive for green buildings. However, their suitability is limited to drier climates, and most products use significant quantities of water.

BuildingGreen... Read more

Does anyone know about temporary flushout equipment that could be used to augment a building's systems to get additional CFM of OA during construction?  For our non-laboratory type projects the flushout period ends up being too long, especially in either humid summers or frigid winters (Pennsylvania).

Hoping that some of you on either... Read more

Welcome to the quiz portion of Mind the Gaps: Making Existing Buildings More Airtight!

Learning Objectives
Upon completing this course, participants will be able to:


Identify key performance problems related to leaky building enclosures.

Examine the benefits of making existing buildings more airtight, such as... Read more

Does anyone have an idea when the AIA Materials Pledge Reporting Framework will be available? Or is there a draft of what it looks like? 

BWBR is on a push to refine our approach towards materials. As AIA Material's Pledge signatory, we were hoping to incorporate the reporting framework into our efforts. Trying to get a sense of the... Read more

The current Stantec/BuildingGreen featured topic is Material Health. Read on to learn the essentials, and then dive deep to earn CEUS.

Also see the Resilient Design featured topic, and also a survey of topics trending in Stantec’s regions.... Read more

Fellow SCLers,

This is a small ball item, but I recently had a conversation with a safety glove manufacturer called Traffi. They make PPE, but in particular they have a line of gloves that they promote as carbon neutral. Their organization's operations are offset with retired RECs, but one line of their gloves, LXT, is offset by a... Read more