Welcome to the quiz portion of Finding Products for LEED v4—A Guide

Learning Objectives
Upon completing this course, participants will be able to:


1. Describe ways in which the LCA approach is gaining ground in LEED v4 and how the transition is reinforced by manufacturer transparency and disclosure.
2.... Read more

Hey SDL,

I'm curious if anybody out there has developed specification language requiring a certain level of airtightness (as assessed via one or a series of blower door tests) for a commercial project when it is not going for a Passive House certification and a blower door test is not required by code--basically, something in the... Read more

Hello Sustainable Construction Leaders,

Save the date! The network's next quarterly call is scheduled for 1pm ET (10am PT), Tuesday November 16th. Topic TBD. Steering Group member Emi LaFountain from Turner will be leading the conversation.

Keep an eye on this thread for more details and Zoom information.

Jen

Hello Folks,
What is your experience with successes and failures in the design process? As a starting point I have listed my Top 5 for success, and my Top 5 for failure. We'd love to see your reactions and look forward to the discussion when we all meet next week at our monthly check-in.

Top 5 reasons for when integrative design... Read more

Hello all!

I'm new to the group, and so excited to be here. Two part question here (as we think about processes and new year goals).

I am at a smallish firm (20 people) in Boston helping to reform our processes to enable even those that are not steeped in sustainability at a daily level to be comfortable looking for opporutunities... Read more

Hi SDLers! I hope early fall is finding you well.

There is a current opportunity to make a difference in the campaign to reduce use of toxic flame retardants.

Arlene Blum and the Green Science Policy Institute, whom many of you know, are currently organizing a campaign of support for the CA State Fire Marshal's proposal to allow... Read more

We have an MEP engineer that is calculating peak loads at about 6 times passive house levels on a large commercial building that is at or near passive house levels of insulation and air infiltration. We suspect one reason is that he is figuring a 50% efficiency level for the ERV. We are showing him ERV systems with 80-90% efficiency, but they... Read more

P.J. is an accomplished writer and speaker who brings passion, humor, and discernment to all her work.

Whether it’s a spotlight report on decarbonization, a webinar on ESG, or just a chummy email bulletin, she is ferociously committed to truth, accuracy, and thoroughly... Read more

We're now mid-way through Summer Summit season! One of the “good problem to have” challenges we’ve had at recent SDL Summits has been too many great five-minute presentations. It’s hard to find time for them all. This year, since we’ll be online anyway, we can get a jump on that by starting the five-minute presentations early in addition to... Read more

Shamus Gumshoe

Hello - 

I am looking for the recording and the PDF/ slides that were shared 3/6 for the project process share-out/ 5 min presentations. It was super inspiring and I would like to refresh my memory of some of what was shared. Thank you!

–
Alison Nash 
AIA, LEED AP ID+C, CPHC, WELL AP
Associate | Sustainability... Read more

Hi Everyone, 

Has anyone had success in finding organizations or programs that will recycle the hard hats? We are looking into options for recycling our expired hard hats that can no longer be used. Ideally, we would want to use a company with facilities across the country but we are open to any suggestions or ideas you all may have.... Read more

What thoughts do you have? What have others said that you feel we want to capture?

The Vision Vacuum: What’s driving environmental and social progress in architecture today? What should be driving it, and where should we be going?

Hello everyone, Happy New Year! 

I wanted to send a quick note that we have an awesome group registered for the Sustainable Design Leaders Winter Summit 2020 and we still have a few open seats! This is taking place Jan. 29th - 31st, 2020 at The Lodge, Gulf Shores, AL with an exciting Pre-Summit Workshop happening that Wednesday. If you... Read more

Split systems are multi-component units that use an outdoor condenser along with separate indoor fan coils to move refrigerant—and provide heating and cooling—in buildings without the need for ducts.

BuildingGreen-Approved Systems

BuildingGreen approves mini-splits that are tested to AHRI standards and have minimum SEER and an... Read more