Friends,

We put a lot of effort into air tightness design, detailing, and construction administration, often including 6-sided mockup and parital or whole-building blower-door testing.  For commercial buildings, these tests measure air leakage in cfm/sf at 1.57 psf (75pa).  

I came across this research paper several years ago, but... Read more

Greetings friends.

Many of you have heard about the CARE Tool, (formerly the 2Build or not 2Build Carbon Calculator.) We are now in the final stages of bringing it online as a free, open access tool hosted by Architecture 2030. We are finalizing and aligning data and working with a web developer (the same one that brought us... Read more

Glazing connects occupants to the outdoors, but with so many opportunities for air leakage, poor insulation, and thermal bridging, glazing is the primary weak link in building energy performance.

BuildingGreen approves glazing that offers strong energy performance properties for a variety of... Read more

Not a green design question but a green firm design question... Finalizing the renewal of our Just certification, we're taking a fresh look at all our benefits & policies. We have already reviewed industry-wide survey data (AIA and PSMJ) but are interested in how the firms we admire (i.e., *you*) are approaching benefits in the transformed... Read more

Not to distract from Tanya's post, but we too have a new opening for a Sustainability Specialist in our Dallas office. If you know anyone...https://careers-pagethink.icims.com/jobs/1254/sustainability-specialist/job

Hi all,

Looking from insights from anyone who's been through WELL certification before - we've got a lab/office project pursing WELL down in Florida that is struggling to meet the turbidity level requirements of the WELL W01 prerequisite, specifically with the hot water supply, and we're not sure how to best remediate the issue.  Should... Read more

Hi All,

At the SCL Summit in November 2019, the Carbon Group discussed meeting in Q1 2019 to craft an action plan for measuring and voluntarily disclosing carbon emissions from our operations.   To kickoff that effort, we will be having an online meeting. 

If your company is already disclosing greenhouse emissions or if that's... Read more

Does anyone know of a source for finding the operational solid waste generated by typical building/use types (weight/sf)? I couldn't find anything on LEED, True, or EPA. I found this table but isn't by sq ft for many of hte uses. Waste Generated by Industry and Building Type (wastecare.com)

https://www.architects.org/awards/sustainable-design-0

All,

My BSA Co-chair, Steven Burke, and I want to make you all aware of the BSA Sustainable Design Awards coming up soon. Please see the above link for qualifications and registration information. This is an award which is attempting to work towards the same stringency, rigor... Read more

Fluid-applied roofing materials can be added to an existing roof to extend its life and provide reflective characteristics.

BuildingGreen-Approved Roofing

Products listed by BuildingGreen have VOC levels below 50 g/l and reflective surfaces to reduce heat gain.

Energy Star requires initial reflectance of 0.65 for low slopes... Read more

Hi SD Leaders: As you may know, The National Architectural Accreditation Board (NAAB) is currently drafting their proposed 2020 Conditions for Architectural Accreditation.  AIA COTE has prepared a response and believe it is critical that the NAAB accreditation process address the role of the architect in climate action and the projected impacts... Read more

For those who haven't heard yet, we've reached a critical milestone with the Contractor Commitment. 51% of the SCL network voted to approve the language of the current draft. That's the mark we needed to hit, so we can move forward with planning the launch! Thank you to all those who have worked tirelessly over the last two years developing... Read more

Welcome to the quiz portion of Video: Eight Steps to Success with LEED-EBOM.

Learning Objectives
Upon completing this course, participants will be able to:


1. Describe the first steps project teams should take when considering LEED-Existing Buildings: O+M.
2. Understand the steps and timeline ofthe LEED-... Read more

Hi folks,

We often hear from you with a suggestion of someone who would be great for the network, and a question about how to refer them. We've now made that easy, with three steps laid out in an Outreach Toolkit that's posted in the left margin of the Member Directory.

So, if you're thinking of someone to invite or come across... Read more

The prepublication version of the AGC playbook is online now. I just stumbled on this this morning but thought it would be great to get eyes on this early and start a discussion here on any of the included guidance. Happy Reading, excited to follow the discussion!

AGC Playbook on Decarbonization and Carbon Reporting in the Construction... Read more