Hello Green Gurus,

Here is the information for this month's Peer Networks Webinar, Jobsite Sustainability Tracking Tools. We hope you will join us!

Register HERE.

Jobsite Sustainability Tracking Tools
Tuesday, May 18th, 2021
2pm - 3pm ET (11am - 12pm PT)

Description

‘You can’t improve what you don’... Read more

Welcome to the quiz portion of The Building Envelope: Primers from Environmental Building News.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain how thermal mass helps maintain indoor thermal comfort in buildings.
2. Describe the differences between closed-cell and... Read more

I am looking for anyone that specializes in this area, see the principles below.

http://universaldesign.ie/What-is-Universal-Design/

We have looked at HOK's Neurodiveristy document which is great. Are there other resources like this, or other designers/consultants you have worked with?

TIA

Kristen

Kristen... Read more

Does anyone have a draft copy of the ASHRAE 209P standard? It has not been finalized? See an overview of it here from IBPSA 2016 summer meeting.

The 209 committee plans to release it for a 3rd public review and hopes to finalize it in late winter or early spring. I'm just trying to track down one of the earlier verisons of the document... Read more

For those at Islandwood for the Summer Summit this week, we have this post-Summit meeting opportunity with James Connelly and Kathleen Smith from ILFI. This is one in a series of "Living Building Leaders" meetings, at which architects who support LBC get to collaborate with ILFI on how scale up LBC adoption.

Here's the agenda for this... Read more

Hi everyone,

I am writing to let you know about a change we are making here at BuildingGreen. We will be changing the name of this all-Peer Networks forum “Green Gurus” to “Green Commons.” 

We’ve made this decision after learning that using the term “guru” outside of its cultural context is appropriative. In an effort to center... Read more

Posting at the request of Sara Bayer of Magnusson Architecture and Planning, who will soon join this group:

"In our quest to achieve Passive House EUI levels in all of our multifamily projects in a healthy manner, we are encountering pushback on the one item that is not really code min just yet (in NYC) and adds real cost:  ERV’s.  Our... Read more

Hi gurus,

Do any of you have preferred portable devices for indoor air quality monitoring? I know it's hard to find apples to apples, but ideally temperature, CO2, VOC, PM2.5, PM5 would be on the list. Mid-level accuracy - better than consumer, not as $ as IAQ professional level. Thanks!

Greetings, Green Gurus:

As unbelievable as it sounds, the Environmental PROTECTION Agency has launched a PR blitz in support of their "new use rule" on asbestos. So the BuildingGreen community needs to push back harder. I'm reposting the links to the letter of opposition that Mary Ann Lazarus put up last week. We definitely need more... Read more

Hi folks,

You may have seen this posted to the Green Gurus forum. Paula got some good responses from architects and engineers, but not so much from GCs so she asked me to follow up and post it here. Please reach out to her if you're willing to be included in these articles/reports. Thanks!

Hi! I’m working on two reports about... Read more

Good morning:

I am hoping someone can point me in the direction of any higher ed campus standards or policies focused on plug load management, occupant behavior related to energy, etc. I'm especially interested in any examples of communications to faculty or students encouraging behaviors that reduce energy consumption. Thanks!

There are a number of clear finish options available, from natural oils and low-toxicity products primarily used on residential woodwork through factory-applied finishes where specific aesthetics and/or added durability are required (such as those used on cabinetry or commercial architectural millwork). Many of these have very high VOC levels,... Read more

CEUs are available for reading all the building-envelope product guides and primer. Click here to learn more and take the quiz.

Vapor retarders are meant to protect our building assemblies from getting wet, but they can also slow drying, contributing to mold and structural degradation.

BuildingGreen-Approved Vapor Retarders

Hey all,

Thanks to everyone who joined today's peer network webinar - it was great to share what our working group has been developing in the last year. This group gathered to work through a series of decision-making trees to publish some kind of relatively repeatable guidance for how to advance this conversation with a variety of owners... Read more