Related to some recent questions on site-specific sun/wind analysis and early energy modeling tools, are there any tools that account for nearby topography (like bluffs) or large buildings/vegetation in energy calculations? Or favorite methods to estimate its impact particularly during early massing studies?

Thanks,

Rachel

Wellness is key to sustainable design. As more and more clients understand the value of healthy built environments, designers need to understand the various wellness rating systems available, and which would meet the project's goals and needs.

WELL and Fitwel have emerged as the two leading wellness rating systems,... Read more

Hi All,

Structure Tone just released their annual Sustainability, Resiliency, and Wellness Report.

Download a copy here.  https://structuretone.com/sustainability/

I’m curious what people think.

Hi all,

Here's a good follow up to Maria's steel question on Monday.  We have a Midwest project that unfortunately (from a carbon perspective) is required to use a traditional, thick precast facade.  We’re working with the contractor and potential future (not yet bid out) fabricators to determine an appropriate % of pozzolanic material... Read more

This month on our Sustainable MEP Leaders call we were asked what resources would be suggested for advancing integrative design.

Two books immediately came to mind for me:

How Building Learn, by Stewart Brand

https://en.wikipedia.org/wiki/How_Buildings_Learn

It was many years ago but reading Stewart Brand’s How... Read more

Welcome to the quiz portion of Exterior Paints: Long-Term Protection and Environmental Tradeoffs.

Learning Objectives
Upon completing this course, participants will be able to:


1. List the primary differences between alkyd and latex paints and stains and between wood, concrete, and metal primers.
2. Explain... Read more

Hello all,

Thank you so much for your work on the Contractor Commitment. In preparation for the Summit, we've pulled all of the sections together into one cohesive document. We would like to invite everyone in the SCL network to review and comment on this latest draft so that we can compile comments before Wednesday and make the most of... Read more

I'm looking to compare using an electric tower crane vs a diesel generated tower crane.  I've got the average gallons/hour for the size of crane I'm looking at, but when I reached out to the crane manufacturers, they can only tell me what size electric supply I need to provide, not the kWh usage for the cranes.  I know that it varies depending... Read more

Does anyone here have a draft spec for low embodied carbon concrete they could share? I see the GSA has a standards sheet with MGWP limits, but we are hoping to actually specify the mix for upcoming projects.

Hello! Long shot here, but I thought I would try.

Alex Wilson and I are working on an article about priorities for the next four years under the Biden-Harris administration. We'd like to feature some recent photos of climate demonstrations, protest signs calling for the Green New Deal, or other environment-focused illustrations of... Read more

Apologies if some of you are seeing this for the second time - on behalf of Frances Yang, Mike Gryniuk and the Carbon Leadership Forum, consider signing on in support of the SE 2050 Challenge for structural engineers. (Yes, there is an option to sign on as a non-structural engineer, in support of the program.)

http://... Read more

I'm sure may are familiar with Aqua in Chicago, and Joe Lstiburek's article on thermal bridging. (https://buildingscience.com/documents/insights/bsi062-thermal-bridges-redux) We have similar problem with a project that is a residential highrise building, concrete structure. Here is my questions. Will energy simulation be able to pick up the... Read more

Hello Sustainable Design Leaders!

I have an exciting announcement today, fall Peer Network events are now open for registration! You can see all the event details and register here!

Based on feedback we received from past events and the most recent surveys, we decided against doing one long week of events for this fall and instead... Read more

As with most office furniture, systems furniture can be made from unsustainable materials and use adhesives and finishes that emit formaldehyde or other hazardous compounds.

BuildingGreen-Approved Furniture

BuildingGreen approves furnishings that: