BuildingGreen Report

Forum topic

Hi - we're working with the University of California Office of the President to put together low-carbon case studies. The two types we are looking for now include 1) a low-carbon TI (not a full building gut/renovation), and 2) any that involve the circular economy (in this case not just building reuse but product reuse) which could include... Read more

Forum topic

Hi all,

Jacobs is looking to hire specifically for sustainability needs! We have a current job posting for a Senior Sustainability Specialist now up, and anticipate a similar posting soon for a mid-level person as well. Location for these would be in the Mountain or Pacific time zones, remote work is fine; other future anticipated posts... Read more

Forum topic

Please see the following invite from Professor Alexandra Rempel at the University of Oregon to participate a 15-20 minute phone/Zoom interview and share your experience and/or perceptions on the problems, challenges, and barriers to incorporating into your projects.

This effort is part of an NSF research grant that I am involved in and... Read more

Forum topic

We are looking for someone early in their career to take over our green building certifications (mostly LEED).  They will also be helping our office build expertise in other certifications, keeping up with green building ordinances in our markets, and (hopefully) help me answer all those questions about energy codes. 

They do not need... Read more

Forum topic

Sometimes referred to as “the dark side”, the construction industry isn’t actually so bad.  We are mostly good people.  And, we need good people. 

Consigli is hiring a Sustainability Manager to work in Massachusetts, and we could use your help to fill the role.  If you or someone you know is brimming with the sustainability force, please... Read more

Forum topic

Is this EDI, or JEDI? (Justice, Equity...)

Notes (attached) and Guiding Questions:

Equity, Diversity, And Inclusion In Our Firms

What are the barriers and what’s working to cut through them?

The process is so super slow... how to to celebrate our small achievements?

How are we fostering inclusion and... Read more

Forum topic

We are putting together a free guide for firms who have not yet started to figure out what their internal standards are for healthy, low carbon materials/products. 

As part of this effort, we are looking to gather from all of you who already have standards - examples and precedent.

Also we are collecting standards from clients/... Read more

Quiz

Sustainability leadership has requested that you take this quiz to help assess sustainability literacy across the firm. Your own results will be presented to you at the end of the quiz but will not be shared with anyone else. Only aggregated, anonymized results will be available to others.

Please don’t do research to inform your answers... Read more

Forum topic

If you have a moment and are working in the IAQ arena, please consider filling out this survey, and you could also win an AirGradient ONE monitor. (Check my review video here: https://www.youtube.com/watch?v=NpqYOWLzv7o) 

https://forms.gle/ytLcq2dvtGrD2UZY7

I also have access to the results and will happily share the data whenever... Read more

Forum topic

Both Z Smith and Lois Vitt Sale have been notified that they have been elected to the College of Fellows of the AIA, class of 2018.

Please join me in congratulating Z and Lois, and post here if you know of others who can now carry the FAIA label.

Well done guys!

Forum topic

Hi All - I wanted to share out the All For Reuse initiative below by two peers in the sustainable materials management network. I know some SDL have already done much research on this from quite a few angles, and those with LBC experience probably even moreso in practice. 

Frances Yang (Arup) and Andrew Ellsworth (Doors Unhinged) have... Read more

Product Guide

Some plasters have extremely high embodied energy or petroleum-based ingredients.

BuildingGreen-Approved Plaster

Products approved include:

natural lime plasters wall coatings made from ingredients such as clay, sand, and cellulose products with high recycled content those with minimal material use some with other compelling... Read more

Team Group

Quiz

Welcome to the quiz portion of Can Concrete Save Us? Locking Up Carbon in Building Materials

Learning Objectives
Upon completing this course, participants will be able to:


 

1. Explain current strategies of carbon capture and sequestration (CCS).
2. Detail how concrete offers another possible pathway to... Read more

Forum topic

Hi folks,

I’m sure most of you know Gail Brager, or at least know of her. For those who don’t, she helps run UC Berkeley’s Center for the Built Environment and is a long-time champion of all the things that make buildings work for their occupants. Perhaps most notably, she was a co-author of the Adaptive Thermal Comfort option in ASHRAE... Read more

Basic page

3

Forum topic

Hi All,

I want to share this report, released today, that I and some other folks on Green Gurus have been working on.  The report dispels the myth that Zero Energy Buildings cost more (specifically in Massachusetts) and it goes further, making the case that Zero Energy Buildings are actually great investments.  Take a look, tell us what... Read more

Forum topic

Hi everyone, we had a great first all-network call with the SCL members who joined us last month! We’re looking forward to the next all-SCL call on January 8, 2024 at 1pm ET.

In the meantime, we’d love for you to fill out this survey to help us best tailor the all-SCL calls to the needs of the network. Please fill out the survey by... Read more

Forum topic

This question came to me via our mutual friend Josh Jacobs, but while interesting it's a bit out of my range of expertise... 

In short, a critical materials assessment specifically focused on airbourne byproducts from a manufacturing process that would be first-of-its-kind in the U.S. 

Required Emissions Details: Link to the 48C... Read more

Forum topic

We are attempting to use Tally on a couple projects and are wondering how others are using the tool in their design process. If any experienced users out there would be willing to have a brief phone conversation I would appreciate it. Thanks