Championing the
Changemakers

Welcome to the quiz portion of Counting Carbon: Understanding Carbon Footprints of Buildings.

Learning Objectives
Upon completing this course, participants will be able to:


1. Differentiate carbon counting approaches based on regulation or monetization from approaches aiming just to reduce carbon emissions.
2... Read more

Please see the following invite from Professor Alexandra Rempel at the University of Oregon to participate a 15-20 minute phone/Zoom interview and share your experience and/or perceptions on the problems, challenges, and barriers to incorporating into your projects.

This effort is part of an NSF research grant that I am involved in and... Read more

Food waste is a major source of greenhouse gas emissions from landfills due to methane released during anaerobic decomposition.

BuildingGreen-Approved Composters

BuildingGreen approves in-vessel commercial composters, which require the smallest footprint and are most likely to be suitable for a densely populated area.

Why... Read more

Welcome to the quiz portion of Resilient Design: 7 Lessons from Early Adopters

Learning Objectives
Upon completing this course, participants will be able to:


1. Recount the ten resilient design principles.
2. Recount each of the seven fundamental messages embraced by the model practitioners.
3. Describe... Read more

tate 

A draft of AIA’s Top Ten Toolkit was just published!

http://bit.ly/COTEtoolkit

Hopefully useful for everyone toward making more very high performance buildings. More updates to come, including interactive tools like a superspreadsheet. 

All the best,

Tate

Our specification team is currently piloting and testing new software to replace E-specs without an easy favorite, and would really love to know what other firms are using.

First question - what software does your firm use for specifications and why?

Second question - would you/your specifier be willing to chat with ours about it... Read more

Protection against corrosion is the primary function of steel coatings, which often contain corrosion inhibitors, volatile solvents, heavy metals, and other hazardous chemicals.

These coatings are specified when steel is used structurally, outdoors, or in high-use areas. In these situations, hazardous coatings are often applied off-site... Read more

Hello,

We are in the very early planning phase of a k-8 public school project to be designed and built in an economically challenged urban location with very limited site options. The project is not LEEDv4 registered yet.  We are at feasibility and costing the soil remediation, needless to say that we would really hope there would be... Read more

Another Break-out by Firm Size.

Guiding Questions:

SDL Best Practices by Firm Size

What's working and what's not? How are others integrating successes?

What strategies are effective in each of these areas: ongoing education, research, knowledge sharing?

How can we structure our green team across... Read more

Hi all,

Jacobs is looking to hire specifically for sustainability needs! We have a current job posting for a Senior Sustainability Specialist now up, and anticipate a similar posting soon for a mid-level person as well. Location for these would be in the Mountain or Pacific time zones, remote work is fine; other future anticipated posts... Read more

Hi everyone,

We're hoping to do some building monitoring as part of Building Use Evaluations on our built work, starting with projects in East Africa, to ensure they are performing as intended and to keep supporting our partners. Ultimately we want to be able to log light, noise, temperature, humidity and CO2 concentration. This does not... Read more

Since the launch of the Contractor’s Commitment in late 2020, nineteen companies have become signatories and many others are using the guidelines as a roadmap for their firms.   Now that the pilot year of the Contractor’s Commitment is complete, it is important to consider if and how the guidelines should evolve to be the most impactful.  Over... Read more

The Resilient Outcomes Working Group grew from a session at the 2020 Winter Summit in Gulf Shores AL, and we are still going strong.  We are currently focused on three primary objectives: 1) bringing awareness to resilient design through a presentation at the GreenBuild 2024 Resilience Summit (we'd love to see some peer network friends at our... Read more

Hi All - I wanted to share out the All For Reuse initiative below by two peers in the sustainable materials management network. I know some SDL have already done much research on this from quite a few angles, and those with LBC experience probably even moreso in practice. 

Frances Yang (Arup) and Andrew Ellsworth (Doors Unhinged) have... Read more

This report is no longer being sold.

If you have questions, please contact customersupport@buildinggreen.com

Whether you're selecting windows for a 99-unit condo project or for a single-family home, you're making a choice your client will have to live with for years, maybe decades.

And no matter how large or small... Read more

This would be a great place to share insights and reflections from the opening session.