Championing the
Changemakers

Does anyone have a spreadsheet or chart that compares the new Fitwel v2.1 with Fitwel v2.0 ?

I can't seem to find such a thing on the Fitwel website.

I am trying to determine which version-route to take on our "Workplace" project.

Or do you have experience in this that you can relay?

Thanks.

Welcome to the quiz portion of Introducing Fitwel v2.1!

Learning Objectives
Upon completing this course, participants will be able to:


1.  Explain the purpose of the Fitwel standard, including how it advances the goals of health and well-being of building occupants—as well as public health.

2. List nine ways in... Read more

Hi folks,

I'm looking into lower-carbon pipe options for HVAC and plumbing. The MEP 2040 has slides from a Buro Happold study in 2020 showing PEX to be much lower in embodied carbon than copper, which is unsurprising. CPVC is also a lower-carbon option.

But PVC has its issues and neither PVC nor PEX are recyclable (especially if... Read more

I hope this post finds you all well. Some news to share.  I have recently made a decision to leave Thornton Tomasetti with an eye toward finding another opportunity to use my 30+ years of green building experience, education, and advocacy to have an even larger impact on climate change. I am going to move slowly to ensure my next chapter is the... Read more

I was wondering if any of you have experience with integrated PVs and/or solar glass. If so, can you could recommend manufactures for each? We are working on a multistory freestanding building in an urban site for a mid-Atlantic city. Because our site and roof area are limited we are looking to maximized the areas where we can generate power.... Read more

Hi all - I’m wondering if any of you have heard of or use the National Green Building Standard, which appears to be primarily for residential and mixed use: https://www.homeinnovation.com/green.

The NGBS Green certification program is based on the ICC-700 National Green Building Standard and supposedly is the program of choice for many... Read more

Hi there colleagues!

Out of curiosity, do you plan on attending Greenbuild in person in San Diego in September? My staff asked me if we were going and my answer is partially contingent on the extent to which attending would mean getting to see some of our favorite people (read: all of you). Looking forward to taking the temperature of... Read more

We have an MEP engineer that is calculating peak loads at about 6 times passive house levels on a large commercial building that is at or near passive house levels of insulation and air infiltration. We suspect one reason is that he is figuring a 50% efficiency level for the ERV. We are showing him ERV systems with 80-90% efficiency, but they... Read more

Welcome to the quiz portion of Doing Daylighting Right.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain occupants' needs and habits when it comes to daylighting.
2. Recognize at least three recent mistakes in daylighting design and their respective alternatives going... Read more

Returning to work: for many, it’s unthinkable without some kind of reassurance that leadership and the facilities team have taken all possible precautions. Lots of organizations are weighing in on what we should pay attention to, but how do we know if it’s working?

The free Re-entry program from Arc is a tracking and measurement... Read more

Hello all, there has been a fair amount of discussion about the emerging Cove Tool for early stage energy modelling and parametric optimization at our firm. I am very curious if any of you are using this software, and if so, what are your thoughts about it? 

https://www.covetool.com/

Thanks,

Esteban Matheus

Rotary Uninterruptible Power Units

Power interruptions and brief changes in voltage can damage electrical equipment, compromise computer data, shut down manufacturing, and endanger hospital patients. In the case of power outages, generators usually take over, but about 98% of all interruptions last less than ten seconds, and there is a... Read more

This just in from Berkeley Earth. The definitive report on 2023 global temperatures. Lots of incredible graphs to peruse but the news is pretty incredible. Actual temperatures far surpassed predictions. "At the start of 2023, we foresaw only a 14% chance that 2023 would become a record warm year, and only a ~1% chance that 2023 would reach 1.5... Read more

All,

I recently met Sahil Tadwalkar who is a Stanford MS Candidate in Civil Engineering. He and his group are interviewing design and construction industry professionals to understand issues and challenges around specifying and using low carbon solutions on projects. Interesting stuff! I encourage you to contribute by setting up an... Read more

Hi all,

BG WebDev needs to clarify the Forum comment moderation rules you would like us to put in place.  We do not require moderation for premium users in our LEEDuser forum unless they include a link in their submitted topic or comment. In this case, we hold the publication of the comment in moderation until we can make sure the link... Read more

Hi folks,

On behalf of ILFI, I'm sharing a notice that the early registration deadline for the Living Product Expo in Pittsburgh is tomorrow! This is a great event for anyone interested in a deep dive into materials transparency, hazard avoidance, low-carbon products, overall innovation, and the Living Product Challenge. There will also... Read more

Friends,

As some of you know, I joined Perkins Eastman last year and it has been amazing. After years of being the Sustainable Design Leader at my last firm, this move has meant I can concentrate on project work because we have such an AMAZING team, led by Heather Jaurequi and Tanya Eagle. Unfortunately, that also means I'm not in the... Read more