Championing the
Changemakers

Here is a fundamental question regarding measuring operational carbon emissions that I'm sure many of you can clarify for me:  Let's say you are considering design options and you want to know the relative contribution of GWP of adding an additional inch of continuous insulation to the building envelope.  The GWP from embodied carbon will... Read more

Hello,

This is not my area of expertise but our contactor has suggested central heat pump hot water (CHPHW) is $1m more expensive than gas fired domestic hot water for a 150 unit multi-family residential building in Massachusetts. The Building Decarbonization Practice Guide is extremely helpful but, from their comments, it is all coming... Read more

First, there was Energy Use reductions

Then there was embodied carbon

Soon it will be refrigerant use/leakage calculations

…and much more

As coordinators and leaders of project teams, what does this look like for the practicing architect and our collaborators?

I have no idea. BUT I’m guessing someone is... Read more

Hi,

I believe a while back there was communication about a hard hat recycling program. Does anyone have any information about a hard hat recycling program? The contractors in the midwest have finally switched to the new style of hard hats with the chin strap and are requiring all subcontactors to comply by July 1, 2024. I'd like to... Read more

Hello SCL,

We are getting back to our usual schedule of a pre-Greenbuild SCL Summit. We will be opening registration and announcing topics shortly. In the meantime, please pencil us into your calendar.

Date: September 25, 2023

Location: ZGF Architecture 600 14th St NW #800, Washington, DC 20005

Time: Soft start at... Read more

Welcome to the quiz portion of Are Cool Roofs Green? The Answer's Not Black and White

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain why roofing choices are complicated by heating tradeoffs, climate effects, and condensation and how cool roofs are intended to reduce... Read more

Concrete and other cementitious materials have both environmental advantages and disadvantages. As builders and designers, should we be looking for alternatives or embracing concrete over competing materials?

This special report takes a look at how these materials are made, presents the key environmental considerations relating to their... Read more

Hello SCL, 

If you didn't attend last week's SCL Summit, then I'll sum up one of the major takeaways: SCL members NEED TO COMMENT ON LEEDV5. The stakes are high, particularly around waste. 

Luckily, Amanda Kaminsky is making it easy for us. She has drafted a sample comment based on our discussion at the Summit. 

If you have... Read more

Fluid-applied roofing materials can be added to an existing roof to extend its life and provide reflective characteristics.

BuildingGreen-Approved Roofing

Products listed by BuildingGreen have VOC levels below 50 g/l and reflective surfaces to reduce heat gain.

Energy Star requires initial reflectance of 0.65 for low slopes... Read more

Alena Jumplot

Hi all, 

Internally in our organization, we seem to have plenty of horizontal (infrastructure) resiliency expertise, but I'm finding the vertical resources to be lacking. I'm hoping to build a collection of beginner- to intermediate-level resources to help guide practice/design standards for our reference. Any pointers on good info... Read more

Hello lovely Green Gurus. Hope you all are well. I am wondering if anyone has installed an indoor sports floor that performed well and is low-emitting. This is for a multi-purpose gymnasium at a community center. Any chance?  Thanks All!

Hello everyone,

We are far too often asked to include parking in our buildings (because why shouldn't the average family have 2.1 kids, .8 pets, and 3 cars) and it always grates on me that we are putting so many resources (natural and monetary) into something that is almost certainly single use and will need to be demolished in 30 years... Read more

Friends,

Through AIA work I have been working with Kim Shinn from TLC Engineering. Kim is involved on the ASHRAE 209 development and has been advocating that the AIA, ASHRAE and USGBC align around this standard. Personally I think this is a good idea as I expect that this standard could easily make it's way into regulations and contracts... Read more

Hey group,

I'm part of the contractor team on a large commercial project pursuing LBC v3.1 Petal Certification, with one of those petals being materials. This requires the team to meet Imperative 10 Red List.

The ownership group has taken the responsibility of red list vetting as a task of their own. The construction team is to... Read more

<iframe width="560" height="315" src="https://www.youtube.com/embed/7tCYQiWxxyA?si=lzTgKz9JaQ50_8HT" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" referrerpolicy="strict-origin-when-cross-origin" allowfullscreen></iframe>