Championing the
Changemakers

Is anyone aware of research or guidance that has looked at VOC’s from roofing products and ventilation intakes? I’ve done some searching, and focus is mainly on managing the construction process to reduce installer exposure. 

Thanks for any help!

Tate

I'm looking to draft some one-page briefs for my consulting engineers to outline what we would like to see in their specs regarding certain materials and systems. For example, letting the plumbing and civil engineers know that we prefer to eliminate PVC pipe and want them to specify alternatives like Polypropylene, cast iron, ABS, etc. The idea... Read more

For questions, please email Jerelyn Wilson directly

Welcome to the quiz portion of Choosing Insulation: High-Performance Foundation & Basement Assemblies – Unit 2.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain the insulating performance and durability of different insulation materials.
2. Provide examples of... Read more

Good Morning;

I wanted to share a resource that everybody might not be aware of - HomeFree by the Healthy Building Network which can be found here:  https://homefree.healthybuilding.net/products

Most of us know that HBN exists, but i think many folks just think HBN = Pharos, which is an extensive database behind a paywall that can... Read more

Greetings Gurus, following the AIA COTE Design for Economy concept, does anyone have a resource for a list of building efficiency ratio "targets" by space type? I've always struggled with this initiative. 

I'm hoping someone knows the anser to this question. For the LEED ND certification the minimum requirement is "The LEED project should contain at least two habitable buildings and be no larger than 1500 acres." Does habitable mean buildings with dwelling units?

Hello All,

A group of us (three architects and a builder- sounds like there should be a joke here) were debating this and we  are stumped.

Application: Residential exterior trim.

50 year warrantied composite product of agricultural byproduct with PVC (EPD not published yet) vs 100 year (if primed on all sides and painted or... Read more

Welcome to the quiz portion of Design for Adaptation: Living in a Climate-Changing World.

Learning Objectives
Upon completing this course, participants will be able to:

1. Identify the major known causes of climate change
2. Describe the range and reliability of predicted temperature changes.
3. List... Read more

Hi Green Gurus (esp. Sustainable MEP leaders...)

I'm looking for suggestions of contacts for MEP consultants, especially in the Chicagoland region, ideally with sustainability highly integrated into the work, specialization in geothermal systems, and indoor agriculture. (doesn't necessarily have to be all-in-one)

For context, we... Read more

The Project StaSIO competition is in full swing, and its time to rate the submissions that made it to the public voting round!  Fancy yourself a connoisseur of simulation graphics and have a spare 5-10 minutes this Friday?  Take a browse through the gallery and rate the 10 graphics and 4 case studies that made it to the final round! Winners... Read more

We're hiring: Join our dynamic team as a Sustainablity Coordinator at Structure Tone Southwest!
APPLY NOW!

Posting is listed for Dallas, but we're open to Austin, Houston, and San Antonio.

Are you passionate about sustainable building practices and wellness in the built environment? Join our team at Structure Tone Southwest... Read more

Has anyone had a Contractor track GHG emissions during construction? If so, any advice on how to include that in the project specifications?

Thanks!

Yarden

I was wondering if any design or contractor friend here can kindly share the carbon emission factor of excavation during construction. 

I found a paper that provides energy use rate per cubic meter and associated carbon emission in kgCO2 for different phase of construction such as excavation earth work, pouring and lifting concrete,... Read more

Hey there, SMEPLs:

Just a reminder that we are on the menu for the next in the Green Gurus Coffee Talk series. 

Please use this link to register

All the SMEPLs are invited to join in the conversation where we talk about things that rumble, squeal, gurgle and spark to our peers in the Design, Construction and Advisory peer... Read more

Poppy Gasbag

Has anyone used Insight for Revit to document the LEED Daylight Credit If so, would you recommend it?

Thanks,

_Ilana