Championing the
Changemakers
BuildingGreen champions the changemakers in sustainable design and building, with trusted insight, unparalleled education, and communities that are transforming the industry.
Log in to your profile
Image: Piranka
Forum topic
Hi folks,
It was fun going back over all the great conversations we had and pulling them together in this report. Please feel free to share it with anyone--no constraints on that!
Also, we'll have a webinar next Friday based on this report-- March 8 at 2pm eastern:
I'll show the report and share key takeaways from the 12th... Read more
Forum topic
Section 901.5.1.3 of the 2018 IgCC includes a requirement that "A critical review shall be performed by an external expert independent of those performing the LCA." I'm curious as to what other's experiences are with having an external expert review an LCA - how does one find such an expert? Do you have any favorites that you'd recommend? ... Read more
Forum topic
Hi all,
We've had a number of clients in the states surrounding Texas that have been hit with really high natural gas bills for February. Some as high as $2.00+/therm. Many are healthcare facilities. Has anyone seen any federal, state, or utility relief programs that are assisting customers with these bills?
Thanks,
Adam... Read more
Quiz
Welcome to the quiz portion of Whole-Building Life Cycle Analysis: Promises and Pitfalls.
Learning Objectives
Upon completing this course, participants will be able to:
1. Define whole-building life-cycle assessment.
2. Explain what whole-building life-cycle assessment can and can't do so you can work within... Read more
Forum topic
Hi GG: Just wanted to make sure you know about a free webinar that Buildings & Cities and Carbon Leadership Forum are putting on:
Zero Carbon: Can Built Environment Education Deliver?
Monday 8 February 2021, 9 – 10 am PST
Details and registration through this site:
https://carbonleadershipforum.org/zero-carbon-... Read more
Forum topic
Have any of you heard of anyone ever using phase change material (PCM) "movable partitions" as a resiliency strategy to mitigate indoor overheating during a heat wave in passive buildings? You'd keep them stored in a basement or cool room, and deploy them into habitable spaces during the heat wave to keep the space cooler than the exterior... Read more
Forum topic
Hi everyone,
We're still working to find the optimal time for the SDLS monthly call. We're now looking at the 4th Tuesday of the month. Please fill out this doodle poll to let us know which of these times work for you.
Thank you!
Jen
Forum topic
We're consolidating our office and I find I have back issues of EBN going back to 1999 on the bookshelf. Any use for these other than compost?
Forum topic
Good evening,
I am looking for suggestions to replace"wood" siding at the 25-year-old Lyle Center for Regenerative Studies and as always there is no solution that does it all. There seem to be three main options: wood, composition siding, or fiber cement siding. I am looking for something with low embodied carbon, little maintenance,... Read more
Forum topic
All,
The Idaho Division of Occupational and Professional Licenses (DOPL) has undertaken the Zero-Based-Rulemaking process this year to eliminate all requirements that are not specifically life-safety related. As such, they have proposed removing the International Energy Conservation Code (IECC) 2018 provisions regarding commissioning... Read more
Forum topic
Greetings Heat Pump Water Heater (HPWH) advocates!
We have an opportunity to advocate to the US DOE on behalf of HPWHs!
Geoff Wickes is an emerging technology product manager for NEEA (Northwest Energy Efficiency Alliance) currently focused entirely on HPWH technology, policy, and market adoption (and in full disclosure: also a... Read more
Forum topic
Forum topic
Hi everyone,
Just a reminder to please fill out the 2024 All-Networks Workshop Attendance Poll by the end of next Monday, December 18th. Thank you so much to those who have filled it out already! :)
-Amanda
Forum topic
Dear all,
For a specific existing building application, we are looking for a half inch insulating glazing unit, preferably with low-e coating. Based on my research, 5/8" seems to be doable (1/8" glass + 3/8" air gap + 1/8" glass) but I'm yet to find a viable 1/2" solution. Have you come across any on your projects? Thanks for your... Read more