Championing the
Changemakers

So every year about this time I get to spend many lovely moments with our AIA 2030 Reporting data. In order to make the data useful the CBECS baselines/National baselines aren't great in telling us how we did.

For about half our 15 projects that we report in the average year - performing arts, convention, data science schools, etc - a... Read more

Hi Carbon Working Group,

It’s been a while since our last online meeting on 3/31 –- admittedly, a bit too long -- so I wanted to share some updates.  You might have seen Candice Pearson’s 5/13 post about the structure of the Contractor’s Commitment and how it’s evolving into a set of guidelines available not only to our SCL Group but to... Read more

On a large sports project, we worked with the structural engineer to spec low carbon / high SCM concrete mixes. Much of the floor area will be sealed and polished concrete, and a concrete sub is pushing back on the SCMs saying they should not be above 20% (with a preference for 0%) for the polish to finish properly, per the manufacturer. Anyone... Read more

Has anyone completed an LCA for an engineering structures lab, particularly one that has a strong wall and strong floor? 

Hello Everyone,

Happy Monday, here is the link to the 2019 SDL Summer Summit Report!

Enjoy,

RoseAnn

Hi all,

Just a reminder that the last day to RSVP for the Living Future 2023 Peer Networks Meetup is tomrorow, April 26th! There are still some spaces left, with 34 people currently signed up. Please RSVP here if you'll be attending.

When: Wednesday May 3, 2023, 7:30-9pm ET

Where: SmithGroup, 1700 New York Avenue, NW, Suite... Read more

How much will it cost to achieve LEED v4 certification?

“We’d love a green building, but can we afford it?”

“We’re required to be LEED Silver, but we’re not sure how to get there under the new rating system.”

“Sure, we’re interested in LEED, as long as it doesn’t cost extra.”

LEED v4 and cost uncertainty

With... Read more

Caseworks can be made from unsustainable wood and other materials, and with adhesives and finishes that offgas formaldehyde and other hazardous compounds.

BuildingGreen-Approved Casework

Approved caseworks are:

I'm sure most (if not everyone) is aware that LEEDv5 is under public review until May 20, 2024. I know I need to make time to flip through it, review, and comment, but I'm having a heckuva time protecting the time in my calendar to do that. Anyone interested in joining me for a 60 - 90 minute meeting to do this together as an accountability... Read more

Hello Green Gurus,

Here is the information for your October Peer Networks Webinar, Advocating for Electrification. We hope you will join us!

Register HERE.

Advocating for Electrification
October 26th, 2020
1pm - 2pm ET (10am - 11am PT)

Description
Hear from leaders in the AEC and policy community on... Read more

Some of you are aware of my ongoing saga of off-site renewable energy and a LEED certification we are pursuing. The short version is that there is a new-construction corporate headquarters office building (Building #2 on the attached graphic). This building is pursuing LEED certification. 

The company also just installed a 1 MW... Read more

Meet the winners:

2024
2023
2022
2021

Welcome to the quiz portion of LEED vs. Green Globes: A Definitive Analysis

Note: If you are taking this quiz as a member of LEEDuser, please take the quiz here.

Learning Objectives
Upon completing this course, participants will be able to:


1. Highlight the most significant differences between LEED and Green... Read more

Hello everyone, Happy New Year! 

I wanted to send a quick note that we have an awesome group registered for the Sustainable Design Leaders Winter Summit 2020 and we still have a few open seats! This is taking place Jan. 29th - 31st, 2020 at The Lodge, Gulf Shores, AL with an exciting Pre-Summit Workshop happening that Wednesday. If you... Read more

Hi all,

We are taking a deep look at green accreditations within our firm. Gone are the days when we could say: "our staff is XX% LEED APs!" as a metric of firm progress. Here are a few questions we are asking ourselves, and I'm wondering how you approach this in your firms:

Does anyone have a Passive House detailing resource recommendation? Something that is applicable to wood over podium and/or metal framing construction? I have the book below but looking for something more applicable.

Passive House Details: Solutions for High-Performance Design 1st Edition

by Donald B. Corner (Author), Jan C.... Read more