Championing the
Changemakers

Hi- Happy Monday!  

Does anyone know if there is an open-source list of manufacturers that have take-back programs? Looking for a summary/spreadsheet with details (costs, qty, etc). I have a small list but I'm guessing there is already one out there...

Also, Doesn't stage D in LCA account for take-back programs? Could this be... Read more

We are working on a large healthcare project in Minnesota.  We're setting sustainability goals a bit late - no certification, but targets with accountability.  I'm working to determine recycled steel content (for structural steel and rebar), and I've gotten a bit of push-back on recycled content based on being in the region of the Iron Range... Read more

I've been hearing recommendations for bipolar ionization, as a way to filter airborne virus particles in HVAC systems while avoiding the energy penalty of increased ventilation. However, I've also heard that ionizing equipment is dangerous because it produces ozone.

Does anyone have any insight into the effectiveness and/or cautions... Read more

Hi all,

I wanted to reach out to fellow MEP energy modeling teams to assess everyone's experience with the new PCI calculation methodology in 2016. It was a substantial change in how we show savings on projects. Big changes can often come with un-intended consequences. I'm all for pushing to higher efficiency - just want to make sure we... Read more

How much does every designer need to know? How to support that basic literacy?

Guiding Questions:

Sustainability leadership has requested that you take this quiz to help assess sustainability literacy across the firm. Your own results will be presented to you at the end of the quiz but will not be shared with anyone else. Only aggregated, anonymized results will be available to others.

Please don’t do research to inform your answers... Read more

Some plasters have extremely high embodied energy or petroleum-based ingredients.

BuildingGreen-Approved Plaster

Products approved include:

This webcast was pre-approved for 1 AIA LU|HSW and 1 GBCI CE hour.

Please complete the survey questions to confirm your attendance and receive your CEUs.

By providing your credential numbers in your profile, you will enable us to automatically report these CEUs to these organizations. Please check your profile to be sure your... Read more

Greg Calnago

Hi All:  We are in the design phase for a 5,700 SF project in NH. The team is taking care to drive down embodied carbon where possible. It will be NZE.

A1-A3 emissions are coming in at 67.15 kgCO2e/sf, of which 11.97 kgCO2e/sf is a hot spot attributed to permeable paving and concrete pavers (a little skewed, since lot and patio sizes... Read more

I am looking at having staff members take a materials course and deciding between Parsons Healthier Materials and AIA Materials Matter certificate programs. Does anyone have feedback on either? Bonus points if you know about both and can provide a direct comparison. Thanks!

Hi folks,

It's here! Highlights, key takeaways, and pics from our packed few days together in Ashland, Mass. in the 2023 Summer Summit report.

From the intro:

Effectively meeting the challenge of the moment is what the world needs from us. Being grounded and energized by connections and sharing with our peers in a safe... Read more

Hi all,

I've tried a couple of different search terms for the forum but haven't been able to find any past conversations on electrochromic glazing yet (which makes me suspect I might be missing something...). We have a potential opportunity to use it in a vertical curtain wall application with a client that is very interested in the... Read more

Sustainable Design Leaders in NYC

New York City has been discussing implementing PACE Financing for years but has not taken action. Over 48 municipalities in New York State have PACE financing for Commercial (including multi-family) properties, it's time NYC does as well. I recently learned from colleagues in the City that all of the... Read more

Howdy all,

Following up on Emily's post (https://www.buildinggreen.com/forum/aia-2030-zero-tool-vs-cbecs-baseline) on AIA2030, the folks on the steering committee's monthly call thought it'd be a good idea to do a general call for feedback on reporting this year while the bangs and bruises are still fresh. The intent is to compile the... Read more

Electrochromic glazing holds the promise of less glare and better energy efficiency with fewer moving parts. The reality is much more complicated and includes information you won’t... Read more

Hello Green Gurus.

I've been looking into EPDs lately and ran across a few companies with Product Envionmental Profiles (PEPs) which they say are also known as EPDs. Does anyone have any experience with PEPs or know if they actually are EPDs? They reference ISO standards 14040 and 14044 in the writing and ISO 14025 in the list of... Read more

Discarded tires are an environmental disaster, and finding a beneficial use for them is a high priority.

BuildingGreen does not approve any flooring product that is made with tire-derived rubber, though some products may be appropriate for exterior use.