Championing the
Changemakers

On a large sports project, we worked with the structural engineer to spec low carbon / high SCM concrete mixes. Much of the floor area will be sealed and polished concrete, and a concrete sub is pushing back on the SCMs saying they should not be above 20% (with a preference for 0%) for the polish to finish properly, per the manufacturer. Anyone... Read more

To piggyback off Nathan's introduction where he mentions construction waste management, who is doing anything innovative or different in managing construction waste?  Construction waste has not historically been a passion of mine, but now working in sustainability and construction, I feel like it has to be by default.  

We have a... Read more

Churn and renovations can disrupt occupants, release or introduce indoor pollutants, and increase the embodied footprint of a building.

BuildingGreen-Approved Partitions

Movable partition systems allow spaces to be easily reconfigured, reducing costs and environmental impact. BuildingGreen approves partitions and panels that have... Read more

Successfully managing the LEED documentation process requires specific knowledge, tools, and skills that are not covered in the LEED Reference Manual. This CEU course is based on the LEED Project Management course that GreenStep developed and teaches through UC–Berkeley Extension. It is designed for professionals who are somewhat familiar with... Read more

For those who are visiting Chicago, Kira Gould has asked me to spread the word about a casual AIA COTE meet-up. Stop by, meet friends and have a beer.

If you will be in Chicago on November 15, please consider joining a casual meet-up of COTE leaders/members/friends (no fee to join; it's pay-your-own-way at the pub):  

AIA COTE... Read more

Is anyone planning on attending the WELL Conference in Scottsdale in March?  I'm trying to figure out if it's worth attending or not?

Hi All,

The SMEPL's Embodied Carbon committee has been hard at work developing a letter that calls for MEP equipment vendors to increase material transparency in their products.  As a way of contacting the most widely-used vendors first, we're asking each of you to enter your "Top 3" specified vendors for each of the products listed in... Read more

Hello, All!  We haven't run WBLCA on a project that may include electrochromic glazing before, and it's embodied carbon footprint is really high in comparison to a more traditional double or triple pane IGU (we thought it would be higher, but this is 3-4x higher).  The EPD we have from Sage Glass for their triple pane electrochromic lists a GWP... Read more

For more than 30 years, Alex Wilson has been the most trusted voice on energy efficiency and environmentally responsible design and construction. Since launching Environmental Building News (EBN) in 1992, he’s built a reputation, resources, and staff to provide the foundation for BuildingGreen, a consulting and information company... Read more

Hello all, there has been a fair amount of discussion about the emerging Cove Tool for early stage energy modelling and parametric optimization at our firm. I am very curious if any of you are using this software, and if so, what are your thoughts about it? 

https://www.covetool.com/

Thanks,

Esteban Matheus

Hi everyone,

Remember the thread on here from last fall that “broke the internet?” We have some progress to share and a chance for members to re-engage. A core team has been meeting to compare project process diagrams and challenges. They will share examples from their firms, along with learnings and best practices, on Wednesday, March 6... Read more

Welcome to the quiz portion of The Hidden Science of High-Performance Building Assemblies.

Learning Objectives
Upon completing this course, participants will be able to:


1. Define hygrothermal pressure and explain what it requires of water, air, and thermal barriers in high-performance assemblies.
2. Explain... Read more

Hello Sustainable Design Leaders!

Here are the details for an upcoming SDL Peer Network web call, this webinar will be a call to share research and resources around mass timber. Hope to see you there!
REGISTER HERE!

Embodied Carbon and Mass Timber – a shared learning conversation
March 31st, 2020
3pm - 4pm ET (... Read more

Thank you for your interest in the Sustainability Leaders Peer Networks hosted by BuildingGreen. We have received your application.

A BuildingGreen team member will be in touch with you soon via email to discuss next steps in the application process.

Hi everyone!
I've seen a lot of claims over the years of living walls or planted buffers that can mitigate *outdoor* air pollution and have always assumed there's no real scientific basis for that idea, unless we're talking an actual forest that's 10s of feet thick. Am I wrong? Are there examples of living walls that actually have been... Read more

Hello Green Gurus,

Here is the information for August's Peer Networks Webinar, Using a Circular Economy as a Framework for Zero Waste, Zero Energy + Zero Carbon. We hope you will join us!

Register HERE.

Using a Circular Economy as a Framework for Zero Waste, Zero Energy + Zero Carbon
Monday, August 23rd, 2021
... Read more

They say that Louisianans are often late to the party but enjoy catching up.  The state, which had been stuck on ASHRAE 90.1-2007 (commercial) and IECC 2009 (residential) and has just adopted legislation jumping to IECC 2021 / IRC 2021, and commits to automatic upgrades with each 3-year code cycle.  This means we join CA, OR, WA, MA, and VT--... Read more