Championing the
Changemakers

Ali Flynn and Alejandra Arce Gomez are planning a breakout meeting for the Waste Managment Group for all interested. 

Please fill out the doodle poll below so that we can find a good time:

https://doodle.com/poll/qxd4zxrw9xzrxwc6

Ali and Alejandra have drafted an updated version of the Commitment for Waste (attached) after... Read more

Hi, all.

Has anyone used Unicel's Timber Curtain Wall System? It uses engineered glulam wood mullions on the inside with aluminum mullion caps / butt joints. Has anyone gotten close to using it, but couldn't get it procured for a particular reason? They note up to 72% more energy efficienct than a conventional aluminum curtain wall and... Read more

Has anyone here found an alternative to XPS for the void former?

A structural engineering contact was included in recent conversations about embodied carbon in insulation materials and brought to our attention that this is a common use for XPS that has nothing to do with its insulating properties. It is typically used where concrete is... Read more

Please share this info with any contacts you have that you think would be a good candidate for our Design Performance Coordinator position -- Thanks!

Design Performance Coordinator in San Antonio

Gurus -

I'm looking for (or to build) a set of US district energy projects for developer-led mixed-use/residential neighborhoods/districts.  Does anyone have a resource for this or have started something similar?   

I am not a member of IDEA but utilize their site quite often. Any other resources come to mind?  I'd be happy to... Read more

see IFTF- A New Story to Spark the Future of Climate Action

and chek out their Climate Action Map download

Happy new year everyone!

My name is Vandita Mudgal, I am the first ever 'Sustainability Engineer (district)' for Hensel Phelps N. California district (covers Nor Cal and Pacific NW). As mentioned, this is the first ever sustainability position at Hensel Phelps, therefore I am developing a lot of processes and systems for our district... Read more

There are so many great contractor-related sessions at Greenbuild this year! I doubt I'm alone in trying to choose between sessions.  

Is there interest in debriefing with SCLers the week after (say Novemeber 9th at 2pm ET?). We could share the golden nuggets from the sessions we attended, saving everyone from wading through the session... Read more

So I was testing assigning a BIT Expert to a Best Practice and I am having trouble getting the profile image to appear.  

When I upload a profile picture, it appears on the standard profile page from "My Account" but when I navigate to the BIT Best Practice 01, the image does not show and it takes me to another profile page that does... Read more

Hello SDL-ers - 

The SDL Climate-Smart Wood Group hosts a monthly online forum for builders all over North America who care about wood - and if that sounds like you, you're invited! As builders, we want to advocate for the conscientious use of wood as part of a holistic commitment to climate justice and resilience. We have been meeting... Read more

Standard HVAC systems require large fans and ductwork to move conditioned air throughout a building, which wastes energy and building space.

BuildingGreen-Approved Chilled Beams

BuildingGreen lists chilled beams that rely on water and smaller ducts to provide HVAC throughout a building.

Performance and Health Considerations... Read more

Welcome to the quiz portion of Why Schools Are Embracing Net-Zero Energy!

Learning Objectives
Upon completing this course, participants will be able to:


Recount why schools are at the forefront of the net-zero energy building trend.

Describe the financial arguments that have led school boards to accept net-zero... Read more

Hi All,

I've been signed up to give a Green Building Rating Systems overview presentation to Clean Energy Interns this summer.  I thought I'd reach out and see if anyone has an updated overview presentation like this already pulled together that they'd be willing to share. It's been a while since I've given a presenation on this topic. ... Read more

Practitioners interested in reducing the embodied carbon of buildings are likely now used to considering the impact of different materials, like mass timber or low-carbon concrete. Low-carbon construction, however, may be less familiar. 

Contractors are just... Read more

Hi All,

I wanted to share an exciting opportinity with this esteemed group: Placetailor is seeking out a Mechanical Engineer to add to their growing team. They are located in Boston, MA and focus on Passive House, Low-energy Design, and they have for two years running meet the tenets of the AIA 2030 Commitment! This is an exciting place... Read more

Hello and Happy New Year!

I joined the SAL Peer Network a few months back and I’m really excited to be part of this group, although a bit delayed in my introduction. I’m an architect working as a consultant and managing the Sustainability Department at Entegrity (an energy and sustainability consulting firm) located in Arkansas. I’ve... Read more

Hey everyone,

This is a quick note to say I am retiring at the end of this month and will be taking a hiatus from the SDL group. I will no longer be practicing architecture, but I will remain active in efforts to preserve the wonders of this world for future generations.   

To all my SDL sisters and brothers (I don't always sound... Read more