Championing the
Changemakers

Hi all,

We have a newly constructed, core/shell project having some hot water issues in the core restrooms.

There is a 0.35 Toto lav installed throughout. The hot water heaters are adjacent on each floor, located in the janitor closets. We did the math, and there could be a gallon of water standing and cooling in the pipe between... Read more

The COTE Toolkit just launched on AIA.org's site, please go and check it out and share with your networks. The project spanned over the last year+ with over 40 authors, subject matter experts, and reviewers contributing to the process, (including many Green Gurus!)

With the goal of closing the information gap to designing high... Read more

All,

Can anyone suggest a product for the following situation.  We are looking to insulate existing aluminum eterior column covers that have a three inch air gap.  The issue is there is no way to remove the covers without destroying them.  we would like to cut small holes, pump in the insulation  and then cap the holes.  Can anyone... Read more

All,

The current version of the program manual includes ID numbers for the best practices, as shown below. I know we want to keep a quick reference number or ID, but though it would be worth asking if we want to use the below, reorder them in some way, or use a different kind of ID. Opinions?

Thanks,
Jenny

--------... Read more

Hi everyone,

I’d like to invite you to join this Friday’s webinar hosted by the Embodied Carbon Network: Using Whole Building LCA to Reduce Embodied Carbon within LEED and Beyond, and to follow up with a tool that I presented at this summer’s Architecture SDL summit, which ZGF has now upgraded and made free to the industry at large.... Read more

On a large sports project, we worked with the structural engineer to spec low carbon / high SCM concrete mixes. Much of the floor area will be sealed and polished concrete, and a concrete sub is pushing back on the SCMs saying they should not be above 20% (with a preference for 0%) for the polish to finish properly, per the manufacturer. Anyone... Read more

I have reached out to the AIA staff members that I work with on the Energy Leadership Group (AIA ELG) to see about getting into the cycle of updating these standard documents.  Another member of the ELG, architect Kjell Anderson of LMN in Seattle, is interested in working with us on this effort, as he has started including Standard 209 language... Read more

Greetings Gurus!! I'm super excited to invite you all to help each other :)

As many of you know, BuildingEase (a completely free tool!) has been born this year, the newest function we just launched is the Crowdsourcing function.

Crowdsourcing lets anyone contribute products to a public Material List (similar to an Outline Spec)... Read more

Hey Peer Network! Curious, if we can crowd-source a solution here for the pervious pavers at our Omaha office (climate zone 5A). Apparently over the years we've tried to add different kinds of fill here (gravel) but it keeps... disappearing. Any recommendations with either a replacement product or fill item? 

All,

I'm looking for a quick methodology to estimate GHG emissions from refrigerants on a per SF basis. Are there any benchmark studies or quick calculators similar to the embodied carbon study? https://carbonleadershipforum.org/embodied-carbon-benchmark-study-1/

Thanks,

Josh

Composting toilets convert human waste into nutrient-rich fertilizer for nonfood plants, rather than mixing the waste with potable water and flushing it down the drain. They can also save infrastructure costs and minimize the burden on wastewater systems.

They’re not for every project, but they do warrant consideration. Composting... Read more

Welcome to the quiz portion of The BuildingGreen Guide to Insulation!

Learning Objectives
Upon completing this course, participants will be able to:


1. Discuss how insulation works to increase the energy efficiency and environmental sustainability of buildings; 
2. Explain why certain materials make more sense than... Read more

Hi folks -

I was contacted last week by the producer of the documentary that launches this Thursday, 12/10 - he is hoping to generate interest among folks across the environmental spectrum (which of course includes all of us!) so I am sharing his pitch below with you all. The subject of water scarcity and drought is only going to... Read more

Hi All,

My team member is leaving Webcor, and unfortunately that means we have to fill her big shoes with someone new! I thought I'd reachout here and see if you know anyone of high caliber looking for a Sustainability Manager position? Someone with LEED PM experience preferred, and a bit more technical background with MEP/ZNE ideally... Read more

Hello All,

ASHRAE and ICC released a draft standard for operational and embodied GHG evaluation.  It's on a fast track to be completed in time for the next code cycle.  This 30 day advisory draft includes dozens of questions looking for feedback from experts like all of you.  Please take a look and provide comments.  I've uploaded the... Read more

Friends,

Through AIA work I have been working with Kim Shinn from TLC Engineering. Kim is involved on the ASHRAE 209 development and has been advocating that the AIA, ASHRAE and USGBC align around this standard. Personally I think this is a good idea as I expect that this standard could easily make it's way into regulations and contracts... Read more

Hello there, 

I am working on a project with indoor plants and active green walls. I would like to design lights for growing plants and people at the same time (which seems to be a non-obvious problem). 
 

I was thinking of Philips, GE, Shneider Lighting, etc. Would you recommend someone I could talk to and eventually engage... Read more