Championing the
Changemakers

Hi all, 

Thank you again to those of you who attended the Spring 2024 SCL Summit! We had an amazing day of learning from one another, including from our presenters.

The slides for the 5-minute presentations are below, as well as the BuildingGreen slides from the Summit. Please be aware that we have permission from all of the... Read more

We're wrapping up a multi year project that went through multiple design changes, leaving us with a ton of material samples.  Does anyone know of a good place we could donate these samples to, to keep them out of the landfill.  I'm in the greater Seattle area.  Thank you for any suggestions.

For those of you who are close to CLT and mass timber, has the jump in US wood price also impacted the pricing of CLT on your projects, or viability of CLT compared to the cost of steel or concrete frame buildings?  

If anyone has price data comparing CLT today to pre-Covid pricing or any metric that would describe the percentage change... Read more

Should the Best Practice names always be accompanied by their number? See the attached screenshots, all taken from the main forum page:

Greetings all, and welcome to all those who already introduced themselves!  My name is Steven Burke and I am a Sustainability Manager at Consigli Construction in Massachusetts.  We are East Coast only, but we have a few offices from DC up to Maine.  I’ve been helping Jenn and Nadav get this group up and running, and I’m relatively new to the... Read more

We have an environmentally-minded client who asked us to look into an alternative to the blue adhesive film that is typically used to seal uninstalled ducts for IAQ purposes. From a human health and waste perspective, they were hoping to find something that was both plastic-free and reusable. Has anyone tried out other options? I thought it was... Read more

...for all the folks on the west coast.

It’s smokey out there. For anyone looking for a cheap and relatively effective way to clean your indoor air, here is an article on a DIY box fan filters. 

https://www.texairfilters.com/a-variation-on-the-box-fan-with-merv-13-filter-air-cleaner/

This PSA is from our friends at NEEA (... Read more

Since starting at LPA last fall, the number one question I get from people outside the firm is how we are hitting (2018-2019) or getting so close to hitting the 2030 Commitment goals. 

Here is a chance to see for yourself! LPA is seeking a Sustainable Design Specialist to join our RED team (Research Education Design) - location open to... Read more

Welcome to the quiz portion of Raze or Retrofit? Six Extraordinary Answers to an Everyday Question.

Learning Objectives
Upon completing this course, participants will be able to:


1. Understand how the embodied impacts of renovation compare to those for new construction.
2. Provide three reasons why building... Read more

Hi all - we have several projects where money from the IRA may be able to get projects farther. I've seen the AIA/USGBC webinar and done some other research as well. Does anyone know if there's a Higher Ed group that is chasing down how and when the money is available and for what exact purposes? Are you planning on using consultants to help... Read more

Hello Green Gurus!

Thank you to all who joined the cross-networks adventure that was the Sustainability Leaders Week: 2021 Summit-Palooza, all of us at BuildingGreen were so glad to share that time and space with you all.

We have been receiving a few questions about next steps, here are a couple details we wanted to share with you... Read more

We had so much fun at our Contractor coffee talk that I reached out to our MEP friends to see if they would set up something similar.  And they have agreed to host a talk on Thursday December 2, at 1-2pm EST.  They will talk about decarbonizing buildings, on a schedule that keeps us under the 1.5° C limit and will also address strategies for... Read more

Mark your calendars Sustainable MEP Leaders!!
Here are the details to save the date for the 2020 MEP Summit:

Date: June 9th and 10th, 2020
Location: Stantec Office in Denver, CO
Schedule Outline: Tues. 9th beginning with Lunch at Noon, ending Wed. about 3pm

Gather and learn from your peers! Share your challenges... Read more

Hi Friends, 

I'm working on an SOP for construction waste management for LBC core and LBC materials petal projects and wanted to get your input on the comingled facility requirements. According to the guidelines, any waste that goes to a comingled facility must be a facility that has an average diversion rate of 80% or higher as a... Read more