Championing the
Changemakers

We should probably agree on the correct spelling for what we at BuildingGreen are calling "BITuser." I noticed that on the Salesforce portfolio screenshot provided by Dennis, it's spelled "BIT User."

BITuser has the advantage of more closely resembling LEEDuser, but it has the disadvantage of looking a little weird in all-caps, as in... Read more

Has anyone used a commercial heat pump water heater for a large protect?  I have found a few manufacturers for this technology, but want to make sure this is a viable and cost approach to electrical eliminate gas on a path to all electric.

Hi folks,

Registration is now open for the SDL Summer Summit. We expect this one to fill up, so if you plan on coming don't wait too long to register.

As usual, those of you who are coming will help set the agenda. We reviewed some ideas yesterday with the Steering Committee and agreed that some topics from January's Winter Summit... Read more

Hello,

We have a mass timber purpose-built rental project specifying flooring at the moment and are trying to find a healthy flooring option while managing acoustics with CLT floorslabs. We don't typically spec vinyl flooring due to the health concerns around PVC, but the project is budget-conscious, and our flooring supplier is... Read more

reposting Arathi Gowda -

https://communityhub.aia.org/blogs/arathi-p-gowda-aia/2024/12/17/cote-ad...

The Advocacy team (part of the AIA COTE leadership group) would like to amplify actions the USGBC has gathered to defend the IRA. As you may know, the IRA is a bipartisan bill with 63,000 infrastructure projects starting nationwide... Read more

A colleague just pointed out an article about M-Fire. Its a factory applied fire inhibitor for wood construction. It's GreenGuard Gold but I can't find any real information. Have any of you heard of this or have any idea what it actually is? https://www.bisnow.com/national/news/construction-development/this-new-tech-will-stop-fires-before-they... Read more

Welcome to the quiz portion of Ten Strategies for Growth in a Recession.

Learning Objectives
Upon completing this course, participants will be able to:


 

1. Understand the importance of diversifying.
2. Restate the benefits to doing energy-modeling analysis very early in the design process.
3. Discuss how... Read more

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

Tue, Oct 9th, 2018 2:00 PM - 3:00 PM EDT (11:00 AM - 12:00 PM PT)

Glazing is by far the most complex single component of our enclosures and it must be climate-tuned to boot. Getting the amount, the location, and the performance attributes of glazing is key to... Read more

All,

For those who tuned into the Green Gurus presentation earlier this week, there was a question that came up during my presentation on NZE/NZC programs regarding whether ILFI allows the offsite renewable energy exception for LBC and Energy Petal projects (as opposed to NZE or NZC). I just double checked with them and it turns out they... Read more

Welcome to the quiz portion of "Spec This, Not That: Avoiding Toxic Chemicals in Commercial Building Projects"!

Learning Objectives
Upon completing this course, participants will be able to:


Identify 33 common hazards found in building products, along with their health and environmental impacts and where they might be found.... Read more

testing

Hi all,

I'm trying to figure out how to use this CLF MEP calculator tool that is downloadable from the CLF website. Please see screenshot attached - does anybody know what they are asking for as an input?

"Custom quantities input: The user can enter custom quantities on this tab and produce numerical results. For data input fill '... Read more

Hi Everyone -

I just received this note from Don Horn at the GSA (Deputy Director, Office of Federal High-Performance Buildings):

"Here's another installment of our work to reduce emissions through GSA's actions. GSA issued a press release this morning announcing our new standards for low carbon concrete and environmentally... Read more

We are embarking on our first CLT projects (our at least we hope that they go that way). Would anyone with experience be willing to share some thoughts from the architect's perspective on things to consider, lessons learned, etc?

Save the Date: If you'll be in DC for AIA's Conference on Architecture or just happen to live nearby, hold 6:00–8:30 pm on Wednesday, June 5 for this event.

6:00–7:00 Reception 7:00–8:30 Show & Tell

We have partners! This event will be hosted by ZGF Architects (on their lovely rooftop patio) in collaboration with US Architects... Read more

Friends,

Through AIA work I have been working with Kim Shinn from TLC Engineering. Kim is involved on the ASHRAE 209 development and has been advocating that the AIA, ASHRAE and USGBC align around this standard. Personally I think this is a good idea as I expect that this standard could easily make it's way into regulations and contracts... Read more