Championing the
Changemakers
BuildingGreen champions the changemakers in sustainable design and building, with trusted insight, unparalleled education, and communities that are transforming the industry.
Log in to your profile
Image: Piranka
Basic page
BuildingGreen is the most trusted voice in sustainable design and architecture.
This ad-free, member-supported resource is here to guide designers in using high-performance strategies, and in selecting sustainable and healthy products.
If you haven't already, start by creating your unique user profile to get your log-in, and be... Read more
Product Guide
Metal roofs can also provide high solar reflectance, minimizing a building’s contribution to the urban heat island effect.
BuildingGreen-approved
Materials and finishes recognized by Energy Star maintain solar reflectance levels after three years of use of 50% for low-slope and 15% for steep-slope. Some unpainted metals and many... Read more
Forum topic
I am looking for a Mechanical Engineering firm in New York state who works in mid-sized commercial (ideally hospitality or multifamily experience) and who has experience with geothermal GSHP systems.
Forum topic
Hi Everyone!
I am building our internal/firm resources around sustainable design, and creating our post-occupancy evaluations is one of those resources. Does anyone have references or resources they'd recommend me to look into for post-occupancy evaluations? So far I am considering a few evalutation types: building user input, building... Read more
Forum topic
Hi All,
If you have 5 minutes, we would appreciate your input in the Google Spreadsheet (linked below). If you only have 1 minute, feel free to reply to this forum post and list your the typical equipment vendors you spec on projects. :)
We're asking each of you to enter your "Top 3" specified vendors for each of the products... Read more
Forum topic
We are working on a large healthcare project in Minnesota. We're setting sustainability goals a bit late - no certification, but targets with accountability. I'm working to determine recycled steel content (for structural steel and rebar), and I've gotten a bit of push-back on recycled content based on being in the region of the Iron Range... Read more
Quiz
Welcome to the quiz portion of What Makes a Product Green?.
Learning Objectives
Upon completing this course, participants will be able to:
1. List and describe at least three attributes that address each of the following categories: "efficient use of materials"; "responsible sourcing"; "energy and water... Read more
Forum topic
Hi all,
Thank you again to those of you who attended the Spring 2024 SCL Summit! We had an amazing day of learning from one another, including from our presenters.
The slides for the 5-minute presentations are below, as well as the BuildingGreen slides from the Summit. Please be aware that we have permission from all of the... Read more
Forum topic
All,
Our firm has been struggling to find carbon reduction strategies for concrete that move us beyond a fly ash only approach. Frankly, the knowledge just isn't there internally or with our consultants. We've known that there are a few folks out there that have a deep bag of tricks, but we haven't had the chance to work with them... Read more
Forum topic
Dear Gurus,
At Greenbuild this year I'll be discussing how statistics can lie (in the context of green building claims). I'm collecting examples of this to prepare. If any of you know of examples, please send them to me!
Here are a few of the fun ways statistics might lie that I would be looking for: biased or too-small sample... Read more
Reports, Courses, Study Guides, Live Webinars
THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.
Wednesday, February 12th, 2020 2-3 pm Eastern (11 am-12 pm Pacific)Whole-building life-cycle assessment (WBLCA) can help project teams reduce embodied carbon as well as many other environmental impacts of building materials. And it’s incentivized in LEED and... Read more
Forum topic
We're wrapping up a multi year project that went through multiple design changes, leaving us with a ton of material samples. Does anyone know of a good place we could donate these samples to, to keep them out of the landfill. I'm in the greater Seattle area. Thank you for any suggestions.
Forum topic
I have been asked to recommend folks to join the AIA’s Framework for Design Excellence. The AIA Framework for Design Excellence is basically the top ten toolkit, that has been rebranded by the AIA and is forming the backbone of much of the policy that the AIA is currently setting.
From the AIA's website:
The Framework for Design... Read moreForum topic
Hello Green Gurus,
Here is the information for this month's Peer Networks Webinar, Making the Case for Equity with Data: a Free Tool for Project Teams. We hope you will join us!
Register HERE.
Making the Case for Equity with Data: a Free Tool for Project Teams
Tuesday, July 27th, 2021
1pm - 2pm ET (10am - 11am... Read more
Forum topic
Hi All,
I wanted to pass on a few cool things we have going on at Built Environment Plus (formerly USGBC MA) I really am conscious of not spamming you often and reserve posts for some of our most exciting happenings.
August 5, Building Tech Forum/MaterialsCAN: Getting to Zero with Embodied Carbon. Featuring 13 5-minute... Read more
Forum topic
Friends,
This is a personal note. My son was just diagnosed with Asthma. I’m started to wonder if it’s just coincidence that this corresponded with him starting kindergarten in a school where they clean with Chlorine bleach. I found substitutes for his small preschool and at home. My understanding is that there’... Read more